Search results

  1. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    For me black screen is bad max17050 booting hekate without battery level, waiting the component.
  2. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    For the records, my black screen first is due rst to 3v3 and dat4 to gnd shorts, after clean black screen with no logo but hekate boot showing 0% battery and I can backup emmc fine so the next is check the fuel gauge and pmics, for missing 1.35v or fuel gauge replace or reflow
  3. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    No, black screen , 130mah to 110mah and finally stuck at 90mah, second stage of boot dont run, so I dont know if install pinofly can solve this.
  4. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    Well, after shorting rst and 3v3 the board looks fine and dont boot, I check clock and data with an oscilloscope and I think the emmc is corrupt because have activity like retrosix detailled and stuck and first stage of boot. So please, If I install pikofly again but fine I can boot with bad...
  5. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi. @rehius or @abal1000x or anybody who know, please, I've shorted 3v3 and rst point and the switch now don't boot, can the emmc is dead? No shorts with all remove.
  6. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi all. Soldering in legs of emmc connector I bridge 3v3 and Rst line from CPU to emmc, my bad but I cant see this in hours because bridge is under connector and from top cant see, only see with the board inclined. Now no shorts, max77620 supply all voltages but max 77812 no. Stuck at 120mah...
  7. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    Please, your wire diameter for emmc connections?
  8. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thank you, now led blink green, yellow and stop so will do d0 short tomorrow.
  9. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

  10. seraser2

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi all. Well, installed in Mariko with two mosfets and when power on led flash blue and quickly green but nothing in LCD, and with volume button cant enter ofw, if I remove the pico boots fine, any sugestion? Thank you.