I have an problem with my N3DSXL and it is that it doesn't seem to want to charge. I replaced the port (didn't fix the problem) but the golden charging pads seem to light up the orange led for about 5 seconds before turning off. I tried testing the voltage on the two resistor and the diode that you showed on the picture above and got 4,5V on the resistor and 2,25V on the diode. The output of the battery charging pins is 0.5V. I'm unsure to what to do since I know it's not the battery's or the cable's fault since I've tested both on a DSi and they seem to work correctly.
Edit: Both fuses on the main board and on the daughter board seem to have continuity so they should work correctly.
Edit: Both fuses on the main board and on the daughter board seem to have continuity so they should work correctly.
Last edited by ElektriikAtk,
He/them/IT does