Recent content by Ttm3

  1. Ttm3

    Switch lite no wifi 2110-1118

    This is what i was thinking but bluetooth works great. Does the lite use the same chip as v1&v2?
  2. Ttm3

    Switch lite no wifi 2110-1118

    Switch lite no wifi gives error 2110-1118. Nothing modded. Bluetooth works fine. Hardwire networking works fine. Any ideas?
  3. Ttm3

    Hardware Switch won’t boot after USB port replacement

    No. I believe it is shorted internally. The switches I've had with this issue still work with a few exceptions... No wired controllers, can't send a payload, battery drains quicker than normal. Your mileage may vary but this is what I've noticed
  4. Ttm3

    Hardware Switch won’t boot after USB port replacement

    I've had this be both. Sometimes the short is the filter itself but sometimes it's shorted in the processor.
  5. Ttm3

    Hardware switch only charging at 0.43 amps help needed thanks

    agreed. even with open data lines you will still get pd fast charge. what I've experienced with open data lines is wired controller will not work, no 5v fast charge, & excessive battery drain.
  6. Ttm3

    Hardware switch only charging at 0.43 amps help needed thanks

    His switch is starting just not going to fast charge on a 5v charger. Open data lines are one possibility.
  7. Ttm3

    Hardware Switch hard mod NAND dump, with Low Voltage eMMC Adapter.

    Were you running Linux? How did you acquire the driver? My system doesn't even recognize the device as being plugged in. I've tried it in Windows & Ubuntu
  8. Ttm3

    Hardware switch only charging at 0.43 amps help needed thanks

    Check for continuity on this choke. Does it recognize a wired controller?
  9. Ttm3

    Hardware Switch hard mod NAND dump, with Low Voltage eMMC Adapter.

    Great thread. Can't believe I missed this info for 2 years. Just ordered mine
  10. Ttm3

    Hardware Switch USB Data line D- reading as OL

    I don't have one. I always assumed it damaged that circuit going through the processor & was not a reflow candidate.
  11. Ttm3

    Hardware Switch USB Data line D- reading as OL

    I've had several of these where the pins in the charge port get bent. This can short the chip in the data lines just above the charger or open the filter just above that resulting in no access to RCM. I've also had it damage the tegra. System still works as normal but the data lines won't...
  12. Ttm3

    Hardware Cant boot RCM with LCD screen connected

    What if you don't hook up the backlight or lcd but you dock the switch. Will it show up on a TV?
  13. Ttm3

    Hardware Cant boot RCM with LCD screen connected

    What if the lcd is connected but not the backlight? Any bent pins? Have you tried another screen?
  14. Ttm3

    Hardware Switch won’t boot after USB port replacement

    It is possible you are going into rcm because you have it set to autorcm but you aren't able to send a Payload because your data line is shorted or broke. I just corrected one like this by replacing the filter just above the charge port. Now my data lines read again & I can access rcm.
  15. Ttm3

    Hardware Switch won’t boot after USB port replacement

    https://gbatemp.net/threads/no-rcm-detection-on-a-hackable-switch-according-to-serial-serial.575200/
See more