Recent content by nuage83

  1. N

    Switch Black Screen Blacklight Ok after picofly and now no boot no 3.3v

    Up
  2. N

    Switch Black Screen Blacklight Ok after picofly and now no boot no 3.3v

    Good morning, ***Google translate french to english. I have already installed several RP2040 chips on Nintendo Switches. Recently I ordered clones on the aliexpress site at the following address: https://fr.aliexpress.com/item/1005...t_main.51.72225e5bK3T0G6&gatewayAdapt=glo2fra The seller...
  3. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Good morning, ***Google translate french to english. I have already installed several RP2040 chips on Nintendo Switches. Recently I ordered clones on the aliexpress site at the following address...
  4. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    I found a solution for OLED switches with Dat0 adapter which are capricious and refuse to start. I tap lightly on the place indicated in the photo, this is obviously enough to put the adapter back on the chip and the console then starts on Atmosphere. Could this pose a real risk for the...
  5. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello everybody I have an rp2040 clone ordered from Ali. I installed it on my switch v2 and I get an RST error at boot. The rst point of the chip is shorted. When I remove the battery, the short circuit is no longer. When I put the battery back in and restart it comes back with the error **...
  6. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    I tried to use an AON6414A mosfet and still get an error ==*. Does anyone have a photo of its setup? THANKS
  7. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi do you have a photo of your installation with this mosfet?
  8. N

    clone data from one emmc to another

    No unfortunately, I wanted to do the kamikaze method and I drilled too much. But in Hekate i can"t dump the old emmc and copy to the new?
  9. N

    clone data from one emmc to another

    Good morning, I messed up a friend's console. I would like to recover the data from its emmc (backup profile) and copy it to the emmc of the motherboard which I will replace. How to do it please.
  10. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    I spent two hours yesterday on a console. Error ==* I tested different mosfets. In the end the error came from the fact that I was using a chip that was already used on another console. By changing the chip, it starts perfectly.
  11. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi Is it necessary to put the aluminum cover back on v1 and v2?
  12. N

    Oled Kamikaze dat0 error *=* no emmc block 0

    thanks for all reply, the mortherboard is dead.
  13. N

    Oled Kamikaze dat0 error *=* no emmc block 0

    No. before using the kamikaze method I used the adapter but it didn't work as it should. So I did the kamikaze method and since then the console no longer starts at all with a black screen ofw.
  14. N

    Oled Kamikaze dat0 error *=* no emmc block 0

    Hello everyone I wanted to test the kamikaze method on an Oled Switch and I got the code *=* Here are the measurements on the point dat0 0.511 0.620 I'll give you a photo of the suicide bomber I committed. If anyone can give me an idea THANKS
  15. N

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi everybody Is it possible to replace a nand without any information from the old one.
See more