Recent content by Makc16384

  1. Makc16384

    Switch OLED strange issue with usb functionality after mod install

    Bro, you definitely need to get a microscope for soldering work (like on AliExpress for $15) or use your phone's photo zoom. When I chipped my first Switch, I just placed an iPad on an upside-down glass above the board and used maximum zoom. That was enough :)
  2. Makc16384

    Switch OLED strange issue with usb functionality after mod install

    So, I finally figured out what the problem was. Just in case someone encounters the same issue. When I carefully measured all the resistances again, I found that there was very low resistance, literally 7–8 ohms, between contacts B6 and B7, which are D+ and D-. ChatGPT told me that this was...
  3. Makc16384

    Switch OLED strange issue with usb functionality after mod install

    After modifying my Nintendo Switch OLED (installing the RP2040), I encountered a strange issue. The console works fine in docked mode: charging, fast charging, and video output to the screen all function perfectly. However, external devices connected to the dock’s USB ports (e.g., external hard...
  4. Makc16384

    4IFIR vs. Switch OC Suite real benchmark?

    I don’t quite understand what problem we are talking about if 4ifir works correctly for everyone and shows greater efficiency in terms of performance per watt than its competitors?
  5. Makc16384

    4IFIR vs. Switch OC Suite real benchmark?

    As you can see in the video, I didn't even have the highest 4ifir settings, just a medium level.
  6. Makc16384

    4IFIR vs. Switch OC Suite real benchmark?

    Sorry, but did you accidentally mix up the screenshots? I have an old version of 4ifir and I can easily play TOTK through a TV at 60fps, and the operating time on a portable device decreases slightly. I have Switch OLED
  7. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    I regularly had problems with the DAT0 contact on my OLED switch and decided to connect by drilling. Everything went well, but I spent the whole night using my wife's nail machine to do it :rofl2:
  8. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    Guys, you were right. From this purple screen, the replacement of the CMD resistor 4.7k 0201 helped! Thank you very much.
  9. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    May I know what video is it?
  10. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    I checked the resistor. This resistance in one direction is 8.3k, in the other 77k. Apparently it’s really him, I’ll buy it as you said and put it. And what resistor is recommended between the G and S points of the MOSFET?
  11. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

  12. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    I completely disabled the board and still get this screen
  13. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    Here. Well, for about a month everything worked fine. Now I have disconnected all contacts from the rp2040 altogether, but I still get this screen.
  14. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    When I turn on the OLED, I get a pink screen immediately. I disassembled the console, found that the RST contact from rp2040 had fallen off. I put it back on, but the screen is still pink. As a result, all the contacts were soldered off and the screen is also pink. I killed the console or can I...
  15. Makc16384

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes.
See more