Recent content by CodyRoseman

  1. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hey, I don't know if I should post this here, but it seems appropriate. Does anyone want to buy a KLMEG8UCTA-B041 256GB eMMC and a KLMCG4JETD-B041 64GB eMMC, one is an original eMMC from an OLED and the 256GB was for an upgrade that I no longer can be bothered doing. Name your price
  2. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    the parasitic capacitance from the ground planes should be completely negligable for this application, but the resistance and current capabilities of the trace width might. Ill find out
  3. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    Only one way to find out. I think it should be ok. the apu only ever sees 2amps during full load, and that current isnt going near that capacitor and especially not 2amps during boot.
  4. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    https://github.com/Ansem-SoD/Picofly/tree/main/Firmwares/Archived
  5. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    The hwfly cpu flex? I could add it, but the final board is going to be substantially smaller, so might not have the space. Also I figured with the mosfet mounted on this board two with two small wires to the capacitors positive terminal would be easy enough, I personally don't like using the...
  6. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes, we discussed the same texas instruments mosfet the other day
  7. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    Around $4 AUD for letter postage. This batch will be made in China, but either way express post gets them from Gerber files to my house in 5 business days
  8. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    They're designed to be mounted upside down on the ram, or on top of the ram enclosure, though that just makes it harder to route the capacitor wires, but each to their own.
  9. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    DragonFly Just got my dragonFly boards in, I'll let you guys know how they go :shit: Also I made some changes and have ordered some to be assembled. If everything goes well you guys can have some to test. Dual MOSFET onboard in single package CMOS oscillator All components are virtually the...
  10. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    Try using tegraexplorer to do a systemwipe, also possibly try reflowing the emmc though I doubt that will fix anything. Try do a system restore and remove the picofly, the parasitic resistance on the clk,cmd and dat0 point might be affecting the emmc 1686483920 If the cpu wire which comes off...
  11. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    I made a quick flex for you guys if you want to test it, im too poor to order more stuff right now haha Just cut the pad to shape and it should work fine I've also upload the inkscape svg project https://drive.google.com/drive/folders/16NoeSxHGKhYybqo3mvYJMKWbEcry6g_L?usp=sharing
  12. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes all my installs have continuity from drain to source, I assume there is either leakage through the cpu or through the mosfet, either way every install is working fine
  13. CodyRoseman

    Hacking Hardware Picofly - a HWFLY switch modchip

    Check your clk trace, and maybe your mosfet setup is shorted somewhere, make sure the gate isnt shorted to the drain or source
  14. CodyRoseman

    Rebuilt OLED NAND, now experiencing some weird things??

    After rebuilding my OLED's nand with a donor nand and donor PRODINFO partition, I can't use the gamecard wihtout crashing atmosphere (donor PRODINFO was supposed to still allow use of the gamecard), and also on the joycon screen there is a red and green border around the console?? also I can't...
  15. CodyRoseman

    Hardware Switch Oled don' t turn on. clk track damaged

    If you have a hot air rework station you can sandwich a daughterboard between the motherboard and the emmc, it will give you acces to the dat0, clk, and cmd pad 1685613118 But you need to still run the clk trace back to the cpu, hopefully there is some trace left to solder to. Im guessing that...
See more
General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: https://youtu.be/40XQ8L9wsCA?si=GzpPBaHQQLU0plt_ Neat