Gaming Emulation Misc Xenoblade Chronicles 3 - Emulator/Etc Discussion

[tet666]

Thanks. I read the patch notes, and I didn't see anything interesting. Am I wrong? Would you suggest updating it? Thanks

It fixes bugs and probably also has some undocumented changes, mods all work again with the updated mods linked above. There are no downsides as far as i can see so sure why not.

 

[lemueldave]

Does anyone have a musashi config that is compatible with 1.1.1? Musashi is the best looking config so far for Yuzu but it's not compatible now.

Edit: Nevermind. I just forgot to update the folder names. Musashi is compatible using the DLC method.

 

[AndrewLB]

Thanks. I read the patch notes, and I didn't see anything interesting. Am I wrong? Would you suggest updating it? Thanks

This update fixes the food bug where none of the buffs from food were actually working. Now they do work.

 

[MashStari]

Hi, Is there any way to make the "X.XXxGame speed v1.1.1" mod toggle on/off ?

Regards

 

[pdot]

Hi, Is there any way to make the "X.XXxGame speed v1.1.1" mod toggle on/off ?

Regards

need this too tried myself but failed think its
button code
code for speed
end code
button release code
code for normal speed
end code

i might be off here, if anyone could help out it would be appricated.

 

[andmoc]

"You can also convert mod into cheats for v1.1.1"
https://tieba.baidu.com/p/8008086542

"Xenoblade Chronicles 3""ver1.1.1"
TID：010074F013262000
BID：03EE3DBAC10CACB8.txt

[30fps(L+B) v1.1.1]
80000042
04090000 017A96A0 00000002
20000000

[60fps(L+A) v1.1.1]
80000041
04090000 017A96A0 00000001
20000000

[0.33xGame speed v1.1.1]
04090000 0000F030 1E2A1001

[0.5xGame speed v1.1.1]
04090000 0000F030 1E2B1001

[0.67xGame speed v1.1.1]
04090000 0000F030 1E2C1001

[0.83xGame speed v1.1.1]
04090000 0000F030 1E2D1001

[default1.0xGame speed v1.1.1]
04090000 0000F030 1E2E1001

[1.33xGame speed v1.1.1]
04090000 0000F030 1E2F1001

[1.67xGame speed v1.1.1]
04090000 0000F030 1E201001

[2.0xGame speed v1.1.1]
04090000 0000F030 1E211001

[2.3xGame speed v1.1.1]
04090000 0000F030 1E221001

[2.67xGame speed v1.1.1]
04090000 0000F030 1E231001

[Disable Scaling v1.1.1]
04090000 00C91CC4 14000017

[Remove Motion Blur v1.1.1]
04090000 00CC90DC D65F03C0

[Disable DOF v1.1.1]
04090000 00CA0B44 14000015

[Disable Chromatic Aberration v1.1.1]
04090000 009BA2B4 D503201F

[Improved DOF v1.1.1]
04090000 00CAB56C 1E2703E9
04090000 00CAB700 1E3C1002

[Improve Level of Detail v1.1.1]
04090000 00C5C33C D503201F
04090000 00C5C34C D503201F
04090000 00C5C35C 14000077

[Remove Outlines v1.1.1]
04090000 00C5CD14 D65F03C0

[Vulkan_Workaround v1.1.1]
04090000 00D04A98 52A8401A
04090000 00D05A18 52A8400B

[Ultrawide219 v1.1.1]
04090000 00BF463C 1E207017

[Ultrawide329 v1.1.1]
04090000 00BF463C 1E219017

[Use Graphics Patch v1.1.1]
https://gbatemp.net/threads/xenoblade-chronicles-3-graphics-settings.616287/
{Equivalent to updating exefs-folder_v1.1.1}
08090000 011AE2C0 642F6D61 65727473
08090000 011AE2C8 6C2F6E69 62706D75
{Need your original romfs-folder}

[2K v1.1.1]
08090000 011CDE8C 0000057C 000009C0
04090000 00BD6334 52800020
04090000 00F9091C 52800028
04090000 00F90928 52800001
04090000 00FD2560 D65F03C0

[60fps_wip2 v1.1.1]
04090000 0000E39C F2A79109
04090000 0000F028 52800F08
04090000 002AD31C 72A79108
04090000 003606C0 72A79108
04090000 00379020 72A79108
04090000 003B8B34 1E2C1000
04090000 00D4D2D8 F2E79109
04090000 00D4D2E4 72A79109
04090000 00DA0414 72A79108

[60fps_wip2 v1.1.1]
04090000 00F9D790 72A78108

[57fps_wip2 v1.1.1]
04090000 00F9D790 72A78208

[54fps_wip2 v1.1.1]
04090000 00F9D790 72A78308

[51fps_wip2 v1.1.1]
04090000 00F9D790 72A78408
{and so on}

Can't make any of these new mods works after update to 1.1.1.

How i update the mods to make them work on this version?

Or how i use the cheat file with all the options?

Thanks in advice!

 

[MashStari]

need this too tried myself but failed think its
button code
code for speed
end code
button release code
code for normal speed
end code

i might be off here, if anyone could help out it would be appricated.

Is there any site or tutorial to see how I can get the button codes? Because I tried to create like you said but it's not working, I supose because I'm not setting correctly the button code. I'm trying this:

[Enable 2.0xGame speed]
80000041
04090000 0000F030 1E211001
20000000

[Disable 2.0xGame speed]
80000042
04090000 0000F030 1E2E1001
20000000

"80000041", "80000042" and "20000000" are the values used for to activate the 60 fps mode (well worked in 1.1.0, in 1.1.1 60 fps is always set On) If I use the "04090000 0000F030 1E211001" without activation before, it works as expected.

 

[MashStari]

need this too tried myself but failed think its
button code
code for speed
end code
button release code
code for normal speed
end code

i might be off here, if anyone could help out it would be appricated.

Is there any tutorial where I can check how to get the button code? Because I thinks that it's failing for me. This is the cheat I tried:

[Enable 2.0xGame speed]
80000041
04090000 0000F030 1E211001
20000000

[Disable 2.0xGame speed]
80000042
04090000 0000F030 1E2E1001
20000000

Where "80000041", "80000042" and "20000000" are the same values used in the 60 fps cheat code (I understandt that is the L+B and L+A buton codes.) That not worked for me. If I set the code for the 2x speed in the cheat file, it works as expected. So it seems that the activation code is not working properly.

 

[pdot]

Is there any site or tutorial to see how I can get the button codes? Because I tried to create like you said but it's not working, I supose because I'm not setting correctly the button code. I'm trying this:

[Enable 2.0xGame speed]
80000041
04090000 0000F030 1E211001
20000000

[Disable 2.0xGame speed]
80000042
04090000 0000F030 1E2E1001
20000000

"80000041", "80000042" and "20000000" are the values used for to activate the 60 fps mode (well worked in 1.1.0, in 1.1.1 60 fps is always set On) If I use the "04090000 0000F030 1E211001" without activation before, it works as expected.

hah had the same code

here is the list

• 80000001: A
• 80000002: B
• 80000004: X
• 80000008: Y
• 80000010: Left Stick Pressed
• 80000020: Right Stick Pressed
• 80000040: L
• 80000080: R
• 80000100: ZL
• 80000200: ZR
• 80000400: Plus
• 80000800: Minus
• 80001000: Left
• 80002000: Up
• 80004000: Right
• 80008000: Down
• 80010000: Left Stick Left
• 80020000: Left Stick Up
• 80040000: Left Stick Right
• 80080000: Left Stick Down
• 80100000: Right Stick Left
• 80200000: Right Stick Up
• 80400000: Right Stick Right
• 80800000: Right Stick Down
• 81000000: SL
• 82000000: SR

 

[lucky]

Can't make any of these new mods works after update to 1.1.1.

How i update the mods to make them work on this version?

Or how i use the cheat file with all the options?

Thanks in advice!

(1)，pretty boy，What you see now is the #736 floor of this post. It is sxos-cheat-codes, not mod-pchtxt-codes!

(2)，Mod is on the #735 floor of this post，Download "Attachments" directly

(3)，If it still fails, remove the v1.1.1 update patch and reinstall it

 

[pdot]

Is there any tutorial where I can check how to get the button code? Because I thinks that it's failing for me. This is the cheat I tried:

[Enable 2.0xGame speed]
80000041
04090000 0000F030 1E211001
20000000

[Disable 2.0xGame speed]
80000042
04090000 0000F030 1E2E1001
20000000

Where "80000041", "80000042" and "20000000" are the same values used in the 60 fps cheat code (I understandt that is the L+B and L+A buton codes.) That not worked for me. If I set the code for the 2x speed in the cheat file, it works as expected. So it seems that the activation code is not working properly.

to add, i think what we are missing is the return to standard value, not sure what the format is supposed to be tho
it needs to return to default speed when we release button.

 

[MashStari]

to add, i think what we are missing is the return to standard value, not sure what the format is supposed to be tho
it needs to return to default speed when we release button.

I have limited myself (I don't know if it's said like that in English, sorry) to using the 60 cheat fps and adapt it to activate/deactivate the speed: set the 2x with the L+A and set the 1x with the L+B, for the list of codes that you have given me , the button codes are correct, so I don't know what could be wrong, thanks for the help.

 

[hayashic]

(1)，pretty boy，What you see now is the #736 floor of this post. It is sxos-cheat-codes, not mod-pchtxt-codes!

(2)，Mod is on the #735 floor of this post，Download "Attachments" directly

(3)，If it still fails, remove the v1.1.1 update patch and reinstall it

Were the ingame shortcuts for enabling/disabling 60fps removed from these? How hard would it be to add them back

 

[edale]

Not the original author "theboy181" himself
Third party update mod v1.1.1

Your "Disable Chromatic Aberration" 1.1.1 mod update isn't working.

 

[edale]

"You can also convert mod into cheats for v1.1.1"

[Disable Chromatic Aberration v1.1.1]
04090000 009BA2B4 D503201F

This isn't working either.

*edit- I meant to edit this into my last post, and now can't find an option to delete this one, so apologies for the double post.

 

[tet666]

Your "Disable Chromatic Aberration" 1.1.1 mod update isn't working.
View attachment 327569

You do realize this game uses a lot of prerendered videos for cutscenes right ? I mean it's obviously impossible for a mod to remove it from a video file.

 

[edale]

You do realize this game uses a lot of prerendered videos for cutscenes right ? I mean it's obviously impossible for a mod to remove it from a video file.

All I know is this is the first time I've noticed Chromatic Aberration at any point in the game, and it was right after I updated the game and mods. *shrug*

 

[lucky]

Your "Disable Chromatic Aberration" 1.1.1 mod update isn't working.
View attachment 327569

I'm sorry, pretty boy. It's too difficult for me to repair this.
Wait for 181 to personally release Mod-v1.1.1 updates.

 

[MashStari]

Is there any tutorial where I can check how to get the button code? Because I thinks that it's failing for me. This is the cheat I tried:

[Enable 2.0xGame speed]
80000041
04090000 0000F030 1E211001
20000000

[Disable 2.0xGame speed]
80000042
04090000 0000F030 1E2E1001
20000000

Where "80000041", "80000042" and "20000000" are the same values used in the 60 fps cheat code (I understandt that is the L+B and L+A buton codes.) That not worked for me. If I set the code for the 2x speed in the cheat file, it works as expected. So it seems that the activation code is not working properly.

Any help with that?

 

[yoco007]

Hi guys! I apologize if this was asked before. I started playing again after a month, and I see that there's new game update. Is it worth updating the game? Are there any big changes? Do mods still work with new update? Last time I played I used Yuzu EA2889. This version worked best for me. No crashes. Should I stick with it or are there any new Yuzu updates that improves gaming performance?