Nintendo Switch stuck at second boot logo (nintendo switch logo)

[a4med]

I’m guessing you were running on Sysnand directly and possibly updated firmware without realizing it. Only thing I can think of that would allow you to operate with a 4G card.

Yes, i was running on sysnand and maybe my brother updated the firmware.

 

[a4med]

thats a great error. It tells us exactly what’s wrong. It would seem the firmware does n0t have exfat drivers (which is OK) so it means we must format the SDcard as fat32 (which is ideal anyway.)

we will need to make a new Emunand and redeploy the sthetix package again on a clean sd card.

you may want to use NxNandManager to copy your game saves. If yiu don’t care about game saves you can skip this step.

Next you will need to use something like rufus to erase everything and format your SDCard as fat32 with 32k block size.

Then recreate you emunand and redeploy sthetix and you should be good to go.

Sir, i bought a 128 gb card and formatted with rufus fat32 with 32k block size.

Please advise me how to create emunand. I don't what is a emunand and how to create it.

Thank you

 

[binkinator]

Sir, i bought a 128 gb card and formatted with rufus fat32 with 32k block size.

Please advise me how to create emunand. I don't what is a emunand and how to create it.

Thank you

Here you go:

1) confirm there’s nothing wrong with the card by running a complete test with h2testw.
2) format the card as FAT32 w/ 32k blocks using rufus.
3) follow this https://rentry.org/EristaEmuNAND (do partition-based Emunand)
4) block bans with this https://rentry.org/ExosphereDNSMITM
5) Once you’re able to boot up successfully on Atmosphere, download the 14.1.2 FW from that Darthsternie Firmware site and do this: https://rentry.org/UpgradeDowngrade

 

[a4med]

Here you go:

1) confirm there’s nothing wrong with the card by running a complete test with h2testw.
2) format the card as FAT32 w/ 32k blocks using rufus.
3) follow this https://rentry.org/EristaEmuNAND (do partition-based Emunand)
4) block bans with this https://rentry.org/ExosphereDNSMITM
5) Once you’re able to boot up successfully on Atmosphere, download the 14.1.2 FW from that Darthsternie Firmware site and do this: https://rentry.org/UpgradeDowngrade

Hello, sir. I did what you told me it is still on the joycon logo . Posting photos which i took for reference.

 

[binkinator]

Hello, sir. I did what you told me it is still on the joycon logo . Posting photos which i took for reference.

Very strange. I think I know what it is. Please post the contents of your /bootloader/hekate_ipl.ini.

 

[a4med]

Very strange. I think I know what it is. Please post the contents of your /bootloader/hekate_ipl.ini.

[config]
autoboot=0
autoboot_list=0
bootwait=0
backlight=100
autohosoff=2
autonogc=1
updater2p=1
bootprotect=0


{--- Custom Firmware ---}
[CFW (SYSNAND)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummc_force_disable=1
icon=bootloader/res/sysnand.bmp
{}

[CFW (EMUMMC)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
icon=bootloader/res/emummc.bmp
{}

 

[binkinator]

[config]
autoboot=0
autoboot_list=0
bootwait=0
backlight=100
autohosoff=2
autonogc=1
updater2p=1
bootprotect=0


{--- Custom Firmware ---}
[CFW (SYSNAND)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummc_force_disable=1
icon=bootloader/res/sysnand.bmp
{}

[CFW (EMUMMC)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
icon=bootloader/res/emummc.bmp
{}

As I expected. You said you did all the steps, however, your hekate_ipl.ini does not match the hekate_ipl.ini shown in https://rentry.org/EristaEmuNAND.

please redo all the steps and pay particular attention to the content of each instruction to Make sure that you have carried it out pro-early.

 

[a4med]

As I expected. You said you did all the steps, however, your hekate_ipl.ini does not match the hekate_ipl.ini shown in https://rentry.org/EristaEmuNAND.

please redo all the steps and pay particular attention to the content of each instruction to Make sure that you have carried it out pro-early.

Okay sir i'll try it again hopefully this time error less

 

[a4med]

As I expected. You said you did all the steps, however, your hekate_ipl.ini does not match the hekate_ipl.ini shown in https://rentry.org/EristaEmuNAND.

please redo all the steps and pay particular attention to the content of each instruction to Make sure that you have carried it out pro-early.

Hello Sir. I tried it and still i'm stuck on the 2nd logo

Please find the hekate.ipl contents as well.

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0

[Atmosphere CFW]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/icon_payload.bmp

[Stock SysNAND]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

 

[binkinator]

Hello Sir. I tried it and still i'm stuck on the 2nd logo

Please find the hekate.ipl contents as well.

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0

[Atmosphere CFW]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/icon_payload.bmp

[Stock SysNAND]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

Please send a screenshot of your /bootloader/payloads directory

 

[a4med]

Please send a screenshot of your /bootloader/payloads directory

 

[binkinator]

This is perfect. Please copy that fusee.bin file and use it as the payload to inject with Tegra RCM on your PC and see if that helps.

e: also delete the /atmosphere/contents directory, if it exists….

 

[a4med]

It is still stucked on the logo. Please find the attached photos.

 

[jkyoho]

RUN L4T and check wifi network

https://gbatemp.net/threads/l4t-ubuntu-a-fully-featured-linux-on-your-switch.537301/

 

[a4med]

RUN L4T and check wifi network

https://gbatemp.net/threads/l4t-ubuntu-a-fully-featured-linux-on-your-switch.537301/

Thank you sir. I'm going to try this.

Thank you Binkinator Sir for helping me since the OG post.

You guys are LEGEND

I GBATEMP period

​

 

[binkinator]

It is still stucked on the logo. Please find the attached photos.

This switch still boots up without CFW, correct? I want to make sure the original Switch boots properly.

 

[a4med]

This switch still boots up without CFW, correct? I want to make sure the original Switch boots properly.

No Sir. It is not booting anything. No OFW and neither CFW. Still stuck on the boot logo.

 

[jkyoho]

No Sir. It is not booting anything. No OFW and neither CFW. Still stuck on the boot logo.

As I thought, since you said cant go to maintenance mode/recovery mode as well, so from my guess this is high chance caused by WIFI issue

 

[a4med]

As I thought, since you said cant go to maintenance mode/recovery mode as well, so from my guess this is high chance caused by WIFI issue

Sir, I'm checking the ubuntu guide you send me. Once i install i'll update the status of my switch.