Tutorial  Updated

Pairing the joy-con on emunand and sysnand

Hello guys! I had the same issue of this thread:
Practically, my joy-con and pro controller weren't synched anymore between EMUnand and SYSnand because I connected them to another console... so when I was switching from SYSnand to EMUnand (and vice versa) I had to redo the controllers pairing

In that thread, that's a way to re-sync the joy-con but you have to transfer a file from EMUnand to SYSnand and for me it's not very safe... So I found a way to transfer that file from SYSnand to EMUnand and keep the SYSnand clean!

So here is the tutorial:


WARNING:

SOMETIMES THIS TUTORIAL CAN LEAD TO THE "RED FIRST SETUP SCREEN" BUT DON'T PANIC! YOUR GAMES AND SAVES ARE SAFE, JUST COMPLETE THE SETUP AND EVERYTHING SHOULD BE AS BEFORE

WE FIGURED OUT THAT SOMETIMES THE SCRIPTS DOESN'T WORK PROPERLY WITH THE NEW HORIZONTAL MODE IF YOU HAVE YOUR JOYCONS ATTACHED SO IS PREFERABLE TO REMOVE JOYCONS BEFORE USING THE SCRIPTS.
I THINK THAT'S A TEGRA EXPLORER BUG AND NOT OUR'S.

I DON'T ASSUME ANY RESPONSIBILITY IF SOMETHING GOES WRONG SO PLEASE FOLLOW THESE STEPS ONLY IF YOU KNOW WHAT YOU ARE DOING


Preparation:
Download the latest version of Tegra Explorer from here: https://github.com/suchmememanyskill/TegraExplorer/releases
Download the right script according to your emunand type from the attached files (and make sure you choose it right)


ATMOSPHERE:

MAKE SURE YOU ARE IN AIRPLANE MODE ON EITHER SYSNAND AND EMUNAND, THIS PROCESS CAN "BREAK" YOUR DNS BECAUSE AS I KNOW, THE 8000000000000050 FILE CONTAINS ALSO WIFI AND OTHER SETTINGS AND THIS CAN LEAD TO BAN.
IF YOU'RE USING INCOGNITO MODE, YOU DON'T NEED TO BE IN AIRPLANE MODE. (BUT IS RACCOMANDED TO DO THAT)



1. Launch TegraExplorer.bin trough whatever you want (RCM loader, TegraRCM ecc…)


2. Go to [SD:/] SD CARD -> tegraeplorer -> syncfix -> Syncfix.te -> Launch Script
and follow the script instructions!

3. DONE!


If you pair your joy-cons/controllers to another console or you format your NAND (SYS or EMU), you have to launch again Syncfix.te to fix the sync issue!



SX OS EMUNAND AS HIDDEN PARTITION:
IF YOU'RE USING SXOS STEALTH MODE OR INCOGNITO MODE, YOU DON'T NEED TO BE IN AIRPLANE MODE.
ON THE CONTRARY, IF YOU ARE NOT USING THOSE, YOU HAVE TO BE IN AIRPLANE ON EITHER SYSNAND AND EMUNAND BEFORE PROCEDING.



DON'T USE TEGRAEXPLORER V2 OR LATER, INSTEAD USE THIS VERSION: https://github.com/suchmememanyskill/TegraExplorer/releases/tag/2.0.5

1. Launch TegraExplorer.bin trough whatever you want (RCM loader, TegraRCM ecc…)

2. Go to
[SD:/] SD CARD -> tegraeplorer -> syncfix -> Preparation.te -> Launch Script
and follow the script instructions!

3. REBOOT TO TEGRA EXPLORER

4. Go to
[SD:/] SD CARD -> tegraeplorer -> syncfix -> Syncfix.te -> Launch Script -> Launch Script
and follow the script instructions!

5. DONE!


You have to launch Preparation.te only the first time you follow this tutorial.
(Obviously, if you delete the emuMMC folder, you have to launch Preparation.te again but… dunno why you should delete it)

This script will create the following path on your micro sd:
sd:/emuMMC/emummc.ini
sd:/emuMMC/ER00/raw_based

This script is necessary to let Tegra Explorer read/write on your emunand and won’t affect it nowise.
If you pair your joy-cons/controllers to another console or you format your NAND (SYS or EMU), you have to launch again ONLY Syncfix.te to fix the sync issue!



SX OS EMUNAND AS FILE
IF YOU'RE USING SXOS STEALTH MODE OR INCOGNITO MODE, YOU DON'T NEED TO BE IN AIRPLANE MODE.
ON THE CONTRARY, IF YOU ARE NOT USING THOSE, YOU HAVE TO BE IN AIRPLANE ON EITHER SYSNAND AND EMUNAND BEFORE PROCEDING.
THIS SCRIPT IS TESTED ONLY ON FAT32 FILE SYSTEM, SO I DON’T KNOW IF IT WORKS ALSO ON EXFAT, LET ME KNOW IF THE EMUNAND CONFIGURATION IS DIFFERENT FOR EXFAT


DON'T USE TEGRAEXPLORER V2 OR LATER, INSTEAD USE THIS VERSION: https://github.com/suchmememanyskill/TegraExplorer/releases/tag/2.0.5

1. Launch TegraExplorer.bin trough whatever you want (RCM loader, TegraRCM ecc…)

2. Go to
[SD:/] SD CARD -> tegraeplorer -> syncfix -> Preparation.te -> Launch Script
and follow the script instructions!

3. REBOOT TO TEGRA EXPLORER

4. Go to
[SD:/] SD CARD -> tegraeplorer -> syncfix -> Syncfix.te -> Launch Script
and follow the script instructions!

5. DONE!


You have to launch Preparation.te every time you follow this tutorial.

This script will create the following paths on your micro sd:

sd:/emuMMC/emummc.ini
sd:/emuMMC/EF00/file_based
sd:/emuMMC/EF00/eMMC

Then, the script will move and rename all your Sxos emunand files from sd:/sxos/emunand/ to sd:/emuMMC/EF00/eMMC like this:

sd:/sxos/emunand/full.00.bin -> sd:/emuMMC/EF00/eMMC/00
.
.
.
sd:/sxos/emunand/full.07.bin -> sd:/emuMMC/EF00/eMMC/07
sd:/sxos/emunand/boot0.bin -> sd:/emuMMC/EF00/eMMC/boot0
sd:/sxos/emunand/boot1.bin -> sd:/emuMMC/EF00/eMMC/boot1


As I said, if you’re using exfat as your file system, please let me know if you have seven “full.XX.bin” files or less (or even more)!

This script is necessary to let Tegra Explorer read/write on your emunand.
As you can imagine, after launching Preparation.te, you aren’t able to boot to Sxos emunand, SO DON’T DO IT, just REBOOT TO TEGRA EXPLORER and launch Syncfix.te.
In Syncfix.te there’s a part that will revert the process so you can boot to Sxos Emunand again!

If you pair your joy-cons/controllers to another console or you format your NAND (SYS or EMU), you have to launch again FIRST Preparation.te, REBOOT TO TEGRA EXPLORER and THEN Syncfix.te to fix the sync issue!


Unfortunately, the Sxos version is still not running on tegragraexplorer v2 or later... so please, if you want to run the script safely on sxos, use this version of tegraexplorer until i'll update it to a newer version: https://github.com/suchmememanyskill/TegraExplorer/releases/tag/2.0.5
 

Attachments

  • SyncfixSxosEmuAsPartition.zip
    5.4 KB · Views: 496
  • SyncfixSxosEmuAsFIle.zip
    5.6 KB · Views: 430
  • syncfix_v3 - Atmosphere.zip
    1.1 KB · Views: 247
Last edited by MezBar,

Tac 21

Well-Known Member
Member
Joined
Feb 2, 2008
Messages
913
Trophies
1
XP
941
Country
Canada
I got new joycons so I had to run the script again as the new joycons failed to work in bluetooth mode if paired with the other nand.


https://github.com/suchmememanyskill/TegraExplorer/releases/tag/3.0.6


I was able to get the snycfixv2.te to work with this update of tegraexplorer for now.

12.1.0 sys and emunand all good

thanks again for making these scripts.
 
Last edited by Tac 21,

Kallim

Well-Known Member
Member
Joined
Jan 12, 2021
Messages
291
Trophies
0
Age
47
XP
652
Country
United Kingdom
Ok I'm doing something wrong.... and its probably something really stupid.

I downloaded tegra exploerer.bin and the atmospere zip file (syncfix v2).

I goto browse SD card (I put it in a folder I named tegra exploerer). I click on the script run it and get "Fatal arguments do not match function destinations"

Thanks for any help
 

GR-DRACULA

Well-Known Member
Member
Joined
Sep 14, 2015
Messages
281
Trophies
0
Age
24
Location
crete
XP
518
Country
Greece
Ok I'm doing something wrong.... and its probably something really stupid.

I downloaded tegra exploerer.bin and the atmospere zip file (syncfix v2).

I goto browse SD card (I put it in a folder I named tegra exploerer). I click on the script run it and get "Fatal arguments do not match function destinations"

Thanks for any help
Hello! Are you using the latest version of tegra explorer?

If yes then keep in mind that you need the v3 script as posted above!

For Tegra Script v3

The original post is not yet updated to include the v3 script unfortunately.
 
Last edited by GR-DRACULA,

Kallim

Well-Known Member
Member
Joined
Jan 12, 2021
Messages
291
Trophies
0
Age
47
XP
652
Country
United Kingdom
Hello! Are you using the latest version of tegra explorer?

If yes then keep in mind that you need the v3 script as posted above!



The original post is not yet updated to include the v3 script unfortunately.
Thanks that'll be it I used v2.

My only concern is the v3 script doesn't actually say its the one for Atmosphere.... but I assume it is or you wouldn't have recommended it? Thanks for the help!
 

GR-DRACULA

Well-Known Member
Member
Joined
Sep 14, 2015
Messages
281
Trophies
0
Age
24
Location
crete
XP
518
Country
Greece
Thanks that'll be it I used v2.

My only concern is the v3 script doesn't actually say its the one for Atmosphere.... but I assume it is or you wouldn't have recommended it? Thanks for the help!
Yes it is for atmosphere, i didn't write that down sorry!
 
  • Like
Reactions: Kallim

Buckton

New Member
Newbie
Joined
Jan 15, 2021
Messages
4
Trophies
0
Age
30
XP
80
Country
Brazil
Yes it is for atmosphere, i didn't write that down sorry!

I got "DONE" and the whole green message, but it doesn't work.
I disconnected all controllers from both my sys and emunand, paired all my 6 joycons to sysnand and then tried it again and it didn't work.
Funny thing is that I see them registered as my controllers, but for some god forsaken reason they won't connect.
Maybe because I'm on 13.0 on Sys and in an older firmware on Emu?
I also got a bluetooth headset paired on Sysnand.

Edit: It was precisely because they were in different firmwares.
My Sysnand is on 13.0 and it's bluetooth drivers were updated in this latest update, therefore, they wouldn't be properly identified on my 12.1 Emunand. Once I got my Emunand updated to 13.0 it worked.

Thanks for the script, friend.
 
Last edited by Buckton,
  • Like
Reactions: GR-DRACULA

GR-DRACULA

Well-Known Member
Member
Joined
Sep 14, 2015
Messages
281
Trophies
0
Age
24
Location
crete
XP
518
Country
Greece
I got "DONE" and the whole green message, but it doesn't work.
I disconnected all controllers from both my sys and emunand, paired all my 6 joycons to sysnand and then tried it again and it didn't work.
Funny thing is that I see them registered as my controllers, but for some god forsaken reason they won't connect.
Maybe because I'm on 13.0 on Sys and in an older firmware on Emu?
I also got a bluetooth headset paired on Sysnand.

Edit: It was precisely because they were in different firmwares.
My Sysnand is on 13.0 and it's bluetooth drivers were updated in this latest update, therefore, they wouldn't be properly identified on my 12.1 Emunand. Once I got my Emunand updated to 13.0 it worked.

Thanks for the script, friend.
Yes nintendo changed a lot on version 13! Make sure you always copy the same firmware's version Bluetooth settings. Also I can confirm that it also copies the Bluetooth headphones pair on emunand! But make sure you have mission control updated and nx-btred uninstalled if you have used those in the past.
 

Shura_333

New Member
Newbie
Joined
Oct 28, 2021
Messages
1
Trophies
0
Age
22
XP
34
Country
Brazil
Added to the first post, sorry for late response but i'm in full immersion with the study...
Hello, sorry for bad english (i am brazillian). this tutorial is for don't need to pair the control every time you switch between sysnand and emunand?
 

Kallim

Well-Known Member
Member
Joined
Jan 12, 2021
Messages
291
Trophies
0
Age
47
XP
652
Country
United Kingdom
Hello, sorry for bad english (i am brazillian). this tutorial is for don't need to pair the control every time you switch between sysnand and emunand?
No you don't need to pair the pads or joycons every time. The emmunand is essentially a copy of your sysnand. So there identical at the point of creation.

From then on any new device (or game you install). Will only exsist on the nand you sync it with.

Think of it like a Parallel universe. Then in one universe (or nand) the joker kills Lois Lane. So superman kills him, forms a police state and gradually turns evil.

But in the other universe (nand) superman is still the do gooder he's always been.

Syncfix is a way of cloning one of our fearless heroes from an alternate earth so all is good in the multiverse again 😊.
 
  • Love
Reactions: MezBar

Tac 21

Well-Known Member
Member
Joined
Feb 2, 2008
Messages
913
Trophies
1
XP
941
Country
Canada
I wonder...since it's bluetooth memory does that mean it'll get the memory for bluetooth audio as well?
 

RedHunter

Well-Known Member
Member
Joined
Dec 12, 2014
Messages
441
Trophies
0
XP
1,569
Country
Italy
I wonder...since it's bluetooth memory does that mean it'll get the memory for bluetooth audio as well?
Nice question, I'll try it this today when my new Zelda joycons arrive.

I've read tho the headphones makes the system slower, they fixed this?
 

Kallim

Well-Known Member
Member
Joined
Jan 12, 2021
Messages
291
Trophies
0
Age
47
XP
652
Country
United Kingdom
Nice question, I'll try it this today when my new Zelda joycons arrive.

I've read tho the headphones makes the system slower, they fixed this?
They did a Bluetooth update in v13. But you'll need to update your emmunand to 13 or it won't sync. I don't know if the update fixes it though.
 
  • Like
Reactions: RedHunter

GR-DRACULA

Well-Known Member
Member
Joined
Sep 14, 2015
Messages
281
Trophies
0
Age
24
Location
crete
XP
518
Country
Greece
These redundant lines triggered my ocd so I removed them xD
1638306894109.png

20211130_231946.jpg
Wow @MezBar I didn't even notice it when I tested it xD
 

Attachments

  • Syncfix.zip
    932 bytes · Views: 133

Kallim

Well-Known Member
Member
Joined
Jan 12, 2021
Messages
291
Trophies
0
Age
47
XP
652
Country
United Kingdom
Crazy question... I have 2 switches.

Can I put the SD card in from the 2nd switch and sync to that emunand. My plan is to have all my joycons and pads available for either switch.
 

jaysea

Well-Known Member
Member
Joined
Aug 17, 2009
Messages
279
Trophies
1
Age
46
XP
1,185
Country
Netherlands
Very nice. My solution was to create a new emunand when I paired new controlers. This is better. It would even be nicer if it were possible to not copy wifi settings and the theme, but I guess that isn’t possible.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • Veho @ Veho:
    The fuuuuu---
  • Veho @ Veho:
    I thought it was an actual xBox at that price.
  • Sicklyboy @ Sicklyboy:
    I wanna grab a 360 Slim and a 360 E one of these days. Missed the boat of getting them at their lowest though, once they were discontinued. Could've got them for cheap back when I was a broke 20 something working at Target, but then again, I was a broke 20 something working at Target
  • Veho @ Veho:
    Being broke is no fun.
  • K3Nv2 @ K3Nv2:
    @Sicklyboy, $150 isn't that bad for a jtag slim on ebay
  • Veho @ Veho:
    I only wish it was actually playable.
  • Veho @ Veho:
    There's a guy on the Tube of You that makes playable mechanical arcade games out of Lego. This could work on the same principle.
  • Veho @ Veho:
    Just a couple of guys taking their manatee out for some fresh air, why you have to molest them?
  • Veho @ Veho:
    Stupid Chinese shop switched their shipping company and this one is slooooooow.
  • LeoTCK @ LeoTCK:
    STOP BUYING CHINESE CRAP THEN
  • LeoTCK @ LeoTCK:
    SUPPORT LOCAL PRODUCTS, MAKE REVOLUTION
  • LeoTCK @ LeoTCK:
    THEY KEEP REMOVING LOCAL SHIt AND REPLACING WItH INFERIOR CHINESE CRAP
  • LeoTCK @ LeoTCK:
    THATS WHY MY PARTNER CANT GET A GOOTWEAR HIS SIZE ANYMORE
  • LeoTCK @ LeoTCK:
    HE HAS BIG FOOT AND BIG DUCK
  • LeoTCK @ LeoTCK:
    d*ck i mean*
  • LeoTCK @ LeoTCK:
    lol
  • Veho @ Veho:
    Mkay.
  • Veho @ Veho:
    I just ordered another package from China just to spite you.
  • SylverReZ @ SylverReZ:
    Communism lol
  • SylverReZ @ SylverReZ:
    OUR products
  • The Real Jdbye @ The Real Jdbye:
    @LeoTCK actually good quality products are dying out because they can't compete with dropshipped chinese crap
    +1
    The Real Jdbye @ The Real Jdbye: @LeoTCK actually good quality products are dying out because they can't compete with dropshipped... +1