Hacking Question Can't get Fusée Gelée using NxLoader (Android)

[RaffdeBlois]

Hello, i tried to reboot my Switch to Recovery mode, i've selected Fusée Gelée payload on SG J3 2017 and plugged OTG cable but nothing was changed.

whats the problem ?

 

[Kubas_inko]

Is your Switch really in RCM? Is your cable really OTG? And so on...

 

[Hondyn]

Id check out the cable since several people, including me had the exact same issue. Change the edges, change the cable and make sure you really got into rcm mode

 

[solitaire4eva]

Hello, i tried to reboot my Switch to Recovery mode, i've selected Fusée Gelée payload on SG J3 2017 and plugged OTG cable but nothing was changed.

whats the problem ?

Download a OTG Checker app to try to confirm your device has OTG ability.

 

[0000ff]

Make sure you're putting your switch in RCM by pressing Power and volume up while your jig is in place, then connect your cable.

If the charging icon appears on the switch, you did not enter RCM.

 

[RaffdeBlois]

Download a OTG Checker app to try to confirm your device has OTG ability.

OTG support is compatible on my SG j3 2017.
i will change my Usb-C cable.

 

[VuuI]

fwiw i had the same issue on my samsung s8 using a c to c anker cable. removed nxloader that i downloaded from the appstore and installed the one from github, that worked.