Homebrew Can't install CIA's

[wixerzp]

When I try to install any CIA with FBI, it goes to 100% and then displays this error message : "Failed to install CIA file. Result code: 0xC92044FA Level: Status (25) Summary : Canceled (9) Module: FS (17) Desc: <unknown> (250)"

 

[proflayton123]

When I try to install any CIA with FBI, it goes to 100% and then displays this error message : "Failed to install CIA file. Result code: 0xC92044FA Level: Status (25) Summary : Canceled (9) Module: FS (17) Desc: <unknown> (250)"

More info on your console? This description isn't enough

 

[wixerzp]

More info on your console? This description isn't enough

I hacked my 3DS with Plailects guide a while ago. Now it's running the newest 11.2.0-35 version. I also have the newest arm9loaderhax version.

 

[proflayton123]

I hacked my 3DS with Plailects guide a while ago. Now it's running the newest 11.2.0-35 version. I also have the newest arm9loaderhax version.

Have you downloaded the latest release?

--------------------- MERGED ---------------------------

Maybe its a bad .cia or something, use freeShop.

 

[wixerzp]

Have you downloaded the latest release?

--------------------- MERGED ---------------------------

Maybe its a bad .cia or something, use freeShop.

Latest release of what?

I tried installing many CIA's including the newest homebrew launcher, they don't work. And yes, I deleleted the titles with FBI before installing them.

Also, how could I use freeshop if I can't install the CIA for it?

 

[swabbo]

I hacked my 3DS with Plailects guide a while ago. Now it's running the newest 11.2.0-35 version. I also have the newest arm9loaderhax version.

Having the latest Arm9loaderhax.bin on your SD means your Luma3ds is the latest version, try updating the actual A9LH Payloads (https://3ds.guide/updating-a9lh)

 

[wixerzp]

Having the latest Arm9loaderhax.bin on your SD means your Luma3ds is the latest version, try updating the actual A9LH Payloads (https://3ds.guide/updating-a9lh)

Okay, I did that, but it still shows the same error when I try to install any CIA :/

 

[swabbo]

Okay, I did that, but it still shows the same error when I try to install any CIA :/

Then i'm stumped ;(

I'd say delete FBI, re-inject it into health&safety app and install a fresh version of FBI, then try installing games

 

[JCCG1989]

I saw a similar trouble, you need to format your console...

 

[wixerzp]

Then i'm stumped ;(

I'd say delete FBI, re-inject it into health&safety app and install a fresh version of FBI, then try installing games

Is there a guide showing how to do that?

 

[swabbo]

From 3ds.guide

Spoiler

Section V - Injecting FBI

1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot
2. Go to “SysNAND Backup/Restore”, then select the “Health&Safety Dump” option to dump Health & Safety to hs.app (you can use Up and Down / Left and Right to change the name)
3. Press (B), then select the “Health&Safety Inject” option
4. Select the FBI injectable .app for your region
5. Press (A) and confirm to inject
6. Press (Start) to reboot
7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, follow this troubleshooting guide

Section VI - Finalizing setup

1. Open Health and Safety (which is now FBI)
2. Select “SD”
3. Select “cias”
4. Navigate to FBI.cia and press (A) to install
5. Navigate to hblauncher_loader.cia and press (A) to install
6. Navigate to lumaupdater.cia and press (A) to install
7. Navigate to arm9loaderhax.bin, then press (A) on it and select the “Copy” option
8. Return to the FBI main menu with (B)
9. Select “CTR NAND”
10. Select “<current directory>”
11. Select the “Paste” option, then press (A) to confirm
12. Exit with the home button
13. Launch the Homebrew Launcher from the home menu
14. Select “DSP Dump”
15. Press (Start) when prompted to exit
16. Reboot while holding Start to launch Hourglass9
17. Go to “SysNAND Backup/Restore”, then select “Health&Safety Inject”
18. Select hs.app (the original one that doesn’t contain FBI), then press (A) and confirm to inject
19. Press (Select) on the main menu to eject your SD card
20. Press (Start) to reboot with the SD card removed
    • Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based luma installation
21. Use the (A) button and the D-Pad to turn on the following:
    • “Show NAND or user string in System Settings”
22. If you are using a New 3DS, you should also enable the following:
    • “New 3DS CPU” to “Clock+L2(x)”
    • This will increase the framerate of many games, but may cause instability in others
    • If some games do not work properly, disable this option and try again
23. Reinsert your SD card, then press Start to save and reboot!

 

[wixerzp]

From 3ds.guide

Spoiler

Section V - Injecting FBI

1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot
2. Go to “SysNAND Backup/Restore”, then select the “Health&Safety Dump” option to dump Health & Safety to hs.app (you can use Up and Down / Left and Right to change the name)
3. Press (B), then select the “Health&Safety Inject” option
4. Select the FBI injectable .app for your region
5. Press (A) and confirm to inject
6. Press (Start) to reboot
7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, follow this troubleshooting guide

Section VI - Finalizing setup

1. Open Health and Safety (which is now FBI)
2. Select “SD”
3. Select “cias”
4. Navigate to FBI.cia and press (A) to install
5. Navigate to hblauncher_loader.cia and press (A) to install
6. Navigate to lumaupdater.cia and press (A) to install
7. Navigate to arm9loaderhax.bin, then press (A) on it and select the “Copy” option
8. Return to the FBI main menu with (B)
9. Select “CTR NAND”
10. Select “<current directory>”
11. Select the “Paste” option, then press (A) to confirm
12. Exit with the home button
13. Launch the Homebrew Launcher from the home menu
14. Select “DSP Dump”
15. Press (Start) when prompted to exit
16. Reboot while holding Start to launch Hourglass9
17. Go to “SysNAND Backup/Restore”, then select “Health&Safety Inject”
18. Select hs.app (the original one that doesn’t contain FBI), then press (A) and confirm to inject
19. Press (Select) on the main menu to eject your SD card
20. Press (Start) to reboot with the SD card removed
    • Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based luma installation
21. Use the (A) button and the D-Pad to turn on the following:
    • “Show NAND or user string in System Settings”
22. If you are using a New 3DS, you should also enable the following:
    • “New 3DS CPU” to “Clock+L2(x)”
    • This will increase the framerate of many games, but may cause instability in others
    • If some games do not work properly, disable this option and try again
23. Reinsert your SD card, then press Start to save and reboot!

Okay I injected the new version of FBI, and it still didn't work... Now it shows me a different error. "Failed to install CIA file. Result code: 0xC92044FA Level: Status (25) Summary : Canceled (9) Module: FS (17) Desc: FAT operation denied (250)"

I saw a similar trouble, you need to format your console...

So I guess I will need to format the console. How should I do that? Also, what will I need to do after I format it?

 

[swabbo]

yeah, that sounds like something to do with your SD/MicroSD card, if it's an SD card make sure the little switch on it is in locked position

 

[JCCG1989]

Okay I injected the new version of FBI, and it still didn't work... Now it shows me a different error. "Failed to install CIA file. Result code: 0xC92044FA Level: Status (25) Summary : Canceled (9) Module: FS (17) Desc: FAT operation denied (250)"



So I guess I will need to format the console. How should I do that? Also, what will I need to do after I format it?

Format using system settings, and then you will able to instal without issues,

 

[Joom]

Format using system settings, and then you will able to instal without issues,

He may just need to reformat his SD, which seems to be the issue.

 

[wixerzp]

Okay, I formatted my 3DS through system settings, and I fixed the problem. Thank you everyone

 

[JCCG1989]

Nice.