Hacking 3DS NOOB PARADISE - Ask questions here

[Sonic Angel Knight]

Okay, I just want to ask that are New 3ds more vulnerable to brick even after following the Plailect's guide?

Most likely after you do the 9.2.0 downgrade, it should be lot safer now.

 

[KunoichiZ]

Okay, I just want to ask that are New 3ds more vulnerable to brick even after following the Plailect's guide?

It's recommended to format the system before you do the guide to prevent bricks. As long as you don't do anything to your sysNAND after following Plailect's guide and if you follow Plailect's guide TO A T and if you don't skip ANY steps, you should not have any problems or brick. Most of the known bricks are from user error, such as using the wrong downgrade pack for your system. n3DS(XL) systems must use the n3DS downgrade pack, and o3DS(XL)/2DS systems must use the o3DS/2DS downgrade pack.

 

[steveroo]

I held select to get into Luma. What option should I select?

 

[Priyam]

It's recommended to format the system before you do the guide to prevent bricks. As long as you don't do anything to your sysNAND after following Plailect's guide and if you follow Plailect's guide TO A T and if you don't skip ANY steps, you should not have any problems or brick. Most of the known bricks are from user error, such as using the wrong downgrade pack for your system. n3DS(XL) systems must use the n3DS downgrade pack, and o3DS(XL)/2DS systems must use the o3DS/2DS downgrade pack.

Thanks once again, I have to format my 3ds even if it's brand new? And by beginning, you mean before doing the browser hax? Any more special instruction for New 3ds users which is not in the guide? I would appreciate the help!

 

[rickpower]

when i run WOODR41.62 files 3ds both whitescreen with top in redbox showing ?menu when i press homekey to exit 3ds reboots

 

[lbrt]

I'm almost ready to install a9lh, but my emunand_original doesn't have fbi injected. I don't think this would be a problem, but I'd feel safe if someone approved.

 

[KunoichiZ]

I'm almost ready to install a9lh, but my emunand_original doesn't have fbi injected. I don't think this would be a problem, but I'd feel safe if someone approved.

Follow Section II - Injecting FBI on Part 4 to reinject FBI after installing A9LH except replace EmuNAND with SysNAND.

I held select to get into Luma. What option should I select?

If you're in Part 4, just hit Start to save and boot into Luma.

Thanks once again, I have to format my 3ds even if it's brand new? And by beginning, you mean before doing the browser hax? Any more special instruction for New 3ds users which is not in the guide? I would appreciate the help!

I would go ahead and format it just to be safe. And yes, before you start Part 1. I don't think that there are any other special instructions other than read ahead and make sure you understand what you're doing.

 

[steveroo]

Okay, when I enter Luma I check settings and it shows EMU9.2.0-20u. I re-enter Luma just to double check there is a emu. After the second time it shows ver. 9.2.0 no emu. I did see some presents delivered from Nintendo. Could Wifi be the problem?

 

[KunoichiZ]

Okay, when I enter Luma I check settings and it shows EMU9.2.0-20u. I re-enter Luma just to double check there is a emu. After the second time it shows ver. 9.2.0 no emu. I did see some presents delivered from Nintendo. Could Wifi be the problem?

When you exit System Settings, you are in SysNAND. You have to use the Homebrew Launcher to reboot back into Luma3DS.

 

[Sonic Angel Knight]

Okay, when I enter Luma I check settings and it shows EMU9.2.0-20u. I re-enter Luma just to double check there is a emu. After the second time it shows ver. 9.2.0 no emu. I did see some presents delivered from Nintendo. Could Wifi be the problem?

If you don't see emu9.2.0 then is not emunand, is not the CFW. You must see that in order to be using CFW. Also each time you enter settings the system reboots, back into sysnand when you exit, so you need to remember to load Luma CFW again

 

[steveroo]

I need to trust Luma. Once Luma loads, don't doubt the Luma. Could I have system theme colour different from emulater theme colour?

 

[KunoichiZ]

I need to trust Luma. Once Luma loads, don't doubt the Luma. Could I have system theme colour different from emulater theme colour?

If you have menuhax installed, change your EmuNAND theme, not sysNAND's theme.

 

[steveroo]

Part 1 - Homebrew Was the second step after upgrading. Yes, I do have menuhax and I see it in Homebrew. Thanks for your help

After changing EMUNand theme colour and looking at settings, SYSNand's theme colour will be the same as EMU's.

 

[KunoichiZ]

Part 1 - Homebrew Was the second step after upgrading. Yes, I do have menuhax and I see it in Homebrew. Thanks for your help

What version of menuhax do you see in your Homebrew Launcher? If you see v2.2, you'll want to download v3.0 from here and replace the menuhax files you have in your 3ds folder and re-setup menuhax from v3.0.

 

[steveroo]

menuhax_manager v3.0

 

[KunoichiZ]

menuhax_manager v3.0

Yes...

 

[lbrt]

I finally set everything up, thanks for all the help. When I couldn't boot to anything after installing al9h, "how could this happen to me" played in my mind, but then I deleted luma cfg and everything went fine then.

 

[Joichiro]

Hi, im new here. i got a N3DS XL (FW 10.3U) gifted from a friend a week ago. it's brand new and it does not have any kind of modification / exploit. Where should i start to get the most easy / noob friendly CFW? a friend of mine recommended me to try luma3DS but i don't understand exactly how to get it installed.

 

[ihaveahax]

Hi, im new here. i got a N3DS XL (FW 10.3U) gifted from a friend a week ago. it's brand new and it does not have any kind of modification / exploit. Where should i start to get the most easy / noob friendly CFW? a friend of mine recommended me to try luma3DS but i don't understand exactly how to get it installed.

many people will recommend starting here: https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)

since it's brand new and probably has no games/saves, you should format it first before you begin.

I'd recommend following it through to the end (part 1 to 5). it will have the least amount of issues.

 

[KunoichiZ]

Hi, im new here. i got a N3DS XL (FW 10.3U) gifted from a friend a week ago. it's brand new and it does not have any kind of modification / exploit. Where should i start to get the most easy / noob friendly CFW? a friend of mine recommended me to try luma3DS but i don't understand exactly how to get it installed.

https://github.com/Plailect/Guide/wiki. Follow Part 1 to Part 3 and do Section II on Part 4 only if you plan on installing CIA (aka downloaded 3DS games) files.

Edit: Ninja'd