Hello! i have a lot of trouble getting cfw to work, first of all let me explain what i have and what not:
Console: New 3ds XL
Firmware 9.2.0-20E
Homebrew Acces: Ninjahax, Ironhax, Menuhax and Browserhax (hax 2.5)
Cfw: RxTools, Cake, PastaCFW, MiniPasta, ReiNand.
BootSetup: CTRBootManager with Cakes.dat, RxTools.3dsx, RxTools/sys/code.bin, Grid hbl.3dsx, and Smea's original boot.3dsx
3ds Folder Cfw data: RxTools + MiniPasta + PastaCFW + Cakes + ReiNand + FBI (NinjaFixed) + MenuHax + Ironhax Installer + FtpBrony + EmuNAND9 + sysUpdater + and the usual Stuff (hans,eShop and more)
What i've done so far:
I've downgraded my New 3ds XL from 10.3-20E to 9.2.0-20E and setup all of the above, my regular 3dsx stuff works fine just like it did on 10.3 i've downgraded also all of the Hax to work on 9.2 and got acces to all those hax'es on 9.2, the thing i can't run is any of the CFW tools or EmuNAND9, FBI Does work but i don't have the acces to install cia's because i can't boot any of the CFW tools. what happens if i boot MiniPasta or ReiNand or RxTools or Cakes or PastaCFW are red Screens on the bottom,or black screens or it just kicking me back to the Homebrew Launcher,and YES I DO HAVE ALL THE FILES:
Dir Setup's for all the CFW Tools:
RxTools:
/3ds/rxtools/rxtools.3dsx
/3ds/rxtools/rxtools.smdh
/rxTools/theme/0/ -Lot's of files in here
/rxTools/sys/Patches/ - Ktr + ctr folder + 4 files ending on .elf
/rxTools/sys/ -reboot.bin font.bin and code.bin
/rxTools/lang/ - lot of .json files
/rxTools/firm/0004013820000002_cetk.bin
/rxTools/data/0004013820000002orig.bin
slot0x25KeyX.bin
RxTools.3dsx (modified file from gbatemp to work with CtrBootManager)
This above setup does not work in anyway with any methode of booting RxTools, not the ninjahax boot nor the ctrbootmanager boot or the direct code.bin boot or what ever. i've disabled menuhax to not mess with my bootsetup and tested ironhax and used ninjahax, smea's hbl, the grid hbl what ever i've tryed it. :c
The same goes with any other cfw boot like the next one:
PastaCFW
/slot0x25KeyX.bin
/3ds/PastaCFW/Ui -lot's of .bin files here
/3ds/PastaCFW/PastaCFW.smdh
/3ds/PastaCFW/PastaCFW.3dsx
/3ds/PastaCFW/loader.bin
/3ds/PastaCFW/system.txt (0kb)
Starting PastaCFW from smea's hbl results in a freeze of the screenshot below:
Booting PastaCFW while holding L gives me the Menu with a "unsupported" on top seen in the screenshot below:
Using smea's Hbl what ever i boot either kicks me back in to the hbl or just stays at a black screen, or gives me a red/black screen setup which is 100% the result if i use the Grid Hbl. anyone please s.o.s
Console: New 3ds XL
Firmware 9.2.0-20E
Homebrew Acces: Ninjahax, Ironhax, Menuhax and Browserhax (hax 2.5)
Cfw: RxTools, Cake, PastaCFW, MiniPasta, ReiNand.
BootSetup: CTRBootManager with Cakes.dat, RxTools.3dsx, RxTools/sys/code.bin, Grid hbl.3dsx, and Smea's original boot.3dsx
3ds Folder Cfw data: RxTools + MiniPasta + PastaCFW + Cakes + ReiNand + FBI (NinjaFixed) + MenuHax + Ironhax Installer + FtpBrony + EmuNAND9 + sysUpdater + and the usual Stuff (hans,eShop and more)
What i've done so far:
I've downgraded my New 3ds XL from 10.3-20E to 9.2.0-20E and setup all of the above, my regular 3dsx stuff works fine just like it did on 10.3 i've downgraded also all of the Hax to work on 9.2 and got acces to all those hax'es on 9.2, the thing i can't run is any of the CFW tools or EmuNAND9, FBI Does work but i don't have the acces to install cia's because i can't boot any of the CFW tools. what happens if i boot MiniPasta or ReiNand or RxTools or Cakes or PastaCFW are red Screens on the bottom,or black screens or it just kicking me back to the Homebrew Launcher,and YES I DO HAVE ALL THE FILES:
boot_config :
{
timeout = 3;
autobootfix = 8;
recovery = 2;
default = 3;
entries = (
{
title = "CakeCFW";
path = "/Cakes.dat";
offset = "0x12000";
},
{
title = "RxTools 3Dsx";
path = "/RxTools.3dsx";
},
{
title = "RxTools";
path = "/rxTools/sys/code.bin";
offset = "0x12000";
},
{
title = "HomeBrew Launcher";
path = "/boot_hb.3dsx";
},
{
title = "Gateway Menu";
path = "/Launcher.dat";
offset = "0x12000";
},
{
title = "PastaCFW";
path = "/3ds/PastaCFW/loader.bin";
offset = "0x12000";
} );
};
{
timeout = 3;
autobootfix = 8;
recovery = 2;
default = 3;
entries = (
{
title = "CakeCFW";
path = "/Cakes.dat";
offset = "0x12000";
},
{
title = "RxTools 3Dsx";
path = "/RxTools.3dsx";
},
{
title = "RxTools";
path = "/rxTools/sys/code.bin";
offset = "0x12000";
},
{
title = "HomeBrew Launcher";
path = "/boot_hb.3dsx";
},
{
title = "Gateway Menu";
path = "/Launcher.dat";
offset = "0x12000";
},
{
title = "PastaCFW";
path = "/3ds/PastaCFW/loader.bin";
offset = "0x12000";
} );
};
Dir Setup's for all the CFW Tools:
RxTools:
/3ds/rxtools/rxtools.3dsx
/3ds/rxtools/rxtools.smdh
/rxTools/theme/0/ -Lot's of files in here
/rxTools/sys/Patches/ - Ktr + ctr folder + 4 files ending on .elf
/rxTools/sys/ -reboot.bin font.bin and code.bin
/rxTools/lang/ - lot of .json files
/rxTools/firm/0004013820000002_cetk.bin
/rxTools/data/0004013820000002orig.bin
slot0x25KeyX.bin
RxTools.3dsx (modified file from gbatemp to work with CtrBootManager)
This above setup does not work in anyway with any methode of booting RxTools, not the ninjahax boot nor the ctrbootmanager boot or the direct code.bin boot or what ever. i've disabled menuhax to not mess with my bootsetup and tested ironhax and used ninjahax, smea's hbl, the grid hbl what ever i've tryed it. :c
The same goes with any other cfw boot like the next one:
PastaCFW
/slot0x25KeyX.bin
/3ds/PastaCFW/Ui -lot's of .bin files here
/3ds/PastaCFW/PastaCFW.smdh
/3ds/PastaCFW/PastaCFW.3dsx
/3ds/PastaCFW/loader.bin
/3ds/PastaCFW/system.txt (0kb)
Starting PastaCFW from smea's hbl results in a freeze of the screenshot below:
Booting PastaCFW while holding L gives me the Menu with a "unsupported" on top seen in the screenshot below:
Using smea's Hbl what ever i boot either kicks me back in to the hbl or just stays at a black screen, or gives me a red/black screen setup which is 100% the result if i use the Grid Hbl. anyone please s.o.s
Last edited by Dennis G,