Hacking Can't load HETAKE anymore / SWITCH OLED Hwfly v5

[Arlong]

****UPDATE ****: the repairman fixed the issue by installing the same update 16.0.3 or Hetake , i restarted it 3 times in front of him it was working fine , i truned it off and went home once i turned it guess what ... issue persist :')



Greetings guys ,

Please note that this is the 2nd time it happens to me , once i turn off the Switch and turn it on again it boots directly to OFW
the leds that show are blue white and orange , i've checked with the guy who did the modship if it needs soldering as some guys from FB group suggested but he told me to do some update he didnt specify which update ,

if you guys could help it would be appreciated because i'm this close to smash it , i regret so much selling my switch V1 .


Video attached , thank you.

 

[Hassal]

Correct your DAT0

 

[Arlong]

Correct your DAT0

Thank you for the reply, does this necessitate any soldering?

 

[randy_w]

Is it orange light? That shouldn't happen if you are running hwfly-nx firmware. Take it back to the modder if you paid someone for it. Or take apart the switch yourself and check A/C/D point's diode reading with a multimeter

 

[Hassal]

Thank you for the reply, does this necessitate any soldering?

All requires soldering even DAT0 since its anchored with solder.

 

[Arlong]

Is it orange light? That shouldn't happen if you are running hwfly-nx firmware. Take it back to the modder if you paid someone for it. Or take apart the switch yourself and check A/C/D point's diode reading with a multimeter

IT's Blue / White / Orange

Post automatically merged: Jul 28, 2023

All requires soldering even DAT0 since its anchored with solder.

the modder confirmed to me that it doesnt need to be solder .. i'll just wait for him to come back even tho it's irritating because he said it wont need soldering just some update .. , thank you tho brother

 

[redmagejosh]

Greetings guys ,

Please note that this is the 2nd time it happens to me , once i turn off the Switch and turn it on again it boots directly to OFW
the leds that show are blue white and orange , i've checked with the guy who did the modship if it needs soldering as some guys from FB group suggested but he told me to do some update he didnt specify which update ,

if you guys could help it would be appreciated because i'm this close to smash it , i regret so much selling my switch V1 .


Video attached , thank you.

Dat0 might need to be readjusted... depending on how the install was done it might or not require soldering. Although Sthetix advise against reflowing the Dat0 point and just joining by preassure I know that a lot of people still reflow it.

 

[Arlong]

Dat0 might need to be readjusted... depending on how the install was done it might or not require soldering. Although Sthetix advise against reflowing the Dat0 point and just joining by preassure I know that a lot of people still reflow it.

the repairman fixed the issue by installing the same update 16.0.3 or Hetake , i restarted it 3 times in front of him it was working fine , i truned it off and went home once i turned it guess what ... issue persist :')