8 BitDo SN30 Pro+ Firmware 6.01

Firmware v6.01 | download

8 BitDo SN30 Pro+ Firmware V 6.01​

Mode:​

1. The button combo to activate/deactivate the profile has changed to [L3+R3+L1+R1].
2. Optimized the dead zone range of the analog sticks in Xinput mode.
3. Optimized the vibration of the Switch mode.
4. Fixed the abnormal vibration issue in Switch mode.
5. Fixed the abnormal vibration issue when connecting to the PS Retro Receiver.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v6.00 | download

8 BitDo SN30 Pro+ Firmware V 6.00​

Mode:​

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v5.04 | download

8 BitDo SN30 Pro+ Firmware V 5.04​

Mode:​

1. Fixed the low battery indicator error on Switch mode.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v5.03 | download

8 BitDo SN30 Pro+ Firmware V 5.03​

Mode:​

1. Fixed abnormal disconnect issue on Switch mode.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v5.02 | download

8 BitDo SN30 Pro+ Firmware V 5.02​

Mode:​

1. Optimized the accuracy of joystick.
2. Fixed the vibration issue on Switch mode.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v5.01 | download

8 BitDo SN30 Pro+ Firmware V 5.01​

Mode:​

1. Optimized the accuracy of joystick.
2. Fixed the problem that turbo function cannot be used for ZL & ZR when the Ultimate Software is set on Switch mode.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v5.00 | download

8 BitDo SN30 Pro+ Firmware V 5.00​

Mode:​

1. Fixed USB connectivity issue with Steam on Switch mode.
2. Added swap function for right stick and triggers on Switch mode through Ultimate Software.
3. Optimized motion control sensitivity.
4. Optimized vibration.
5. Fixed LED indicator error for player 5-8 on Switch mode.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v4.02 | download

8 BitDo SN30 Pro+ Firmware V 4.02​

Mode:​

1. Fixed the problem that L2 and R2 buttons cannot be added in the macro command when the Altimate Software is set on Android and Switch mode.
2. Fixed the problem of interfering with other Bluetooth devices when the gamepad is connecting via Bluetooth.
3. Fixed the problem of insensitive movement when playing "Hollow Knight" on Xinput mode via Bluetooth connection with Win10.
4. Fixed the Home button keycode value on Dinput mode.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v4.01 | download

8 BitDo SN30 Pro+ Firmware V 4.01​

Mode:​

1. Enhanced the stability of bluetooth automatic reconnection on Switch mode.
2. Fixed the lag issue to game on Xinput mode of bluetooth connection.
3. Enhanced the joystick accuracy and precision.
4. Fixed the abnormal recognition issue to PC Steam on Switch mode of USB connection.
5. Fixed exception function of the Star button on Switch mode.
6. Added support for battery level indication on Xinput mode of bluetooth connection (Via Xbox GameBar).
7. Fixed the bug that the settings of mapping star button as turbo function button via Utimate is not effective on Switch mode.
8. Fixed USB connection issue when bluetooth is connecting on Switch mode.
   Note: New version adjusted function framework, the old ultimate configuration need to reconfigure.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.

Firmware v3.02 | download

8 BitDo SN30 Pro+ Firmware V 3.02​

Mode:​

1. Added bluetooth pairing function via USB cable on Switch mode.
2. Fixed the battery indication error when connected to Switch.
3. Enhance the accuracy of joystick.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.