the memchunkhax2 hype post with .3dsx

there is more going on in the comments that this post is somewhat outdated now.
read this. it's important.
  • you cannot use this for downgrading, installing .CIAs, etc. yet. it is purely for testing.
  • when you post results, include your model, entry point, and full firmware version (e.g. 10.3.0-28E).
  • this has pretty much no risk of bricking as it doesn't write to the NAND or anything. with that in mind I am not responsible if anything weird happens so run this at your own risk.
  • if you get a test value of DEADCAFE then it has worked.
  • this might help with getting "DEADCAFE":
    Ptrk25 said:
    99% Deadcafe on N3DS 10.3
    • Use menuhax
    • Open FTP-3DS
    • Close it with L+R+Down+B
    • Open memchunkhax
    • It should display deadcafe
    Ptrk25
    Click to expand...

latest build:
memchunkhax2-a636c1b.zip
Sun Jan 3 14:30:42 PST 2016
this is based on commit a636c1b at GitHub

libctru build:
https://github.com/smealum/ctrulib/tree/cf0a0dc8a0da5fa4c7985762810e8b813bca8769

thread:
https://gbatemp.net/threads/clarification-thread-what-is-going-on.407074/
  • Like
Reactions: 20 people

Comments

Kafke
N3DSXL 9.9.0-26U

Always went to "Map complete" regardless of entry point, previous apps loaded, etc. Finally got it to work by redownloading the starter kit, putting the new boot.3dsx on my SD card, then using IronHax, booting into ftBrony, doing a hard exit (l+r+down+b), and finally opening the app. Correctly outputted DEADCAFE and promptly hung.

Couldn't get it to work with MenuHax at all.
 
F
10.3.0.28U O3DS

Froze on "MAP COMPLETE" with Menuhax after opening FTP 3DS

Worked with Ironhax (got DEADCAFE) after opening mGBA
 
F
@Pandaxclone2
Get DEADCAFE now with Menuhax (without opening anything else)

also works on Ironhax without clicking anything
Thank you
 
  • Like
Reactions: 1 person
Astoria
O3DS 9.9U, using Themehax and Grid Launcher.
100% success rate, don't need to enter any other homebrew app before, it just works
 
VinsCool
N3DS XL 10.3-28U, Launched Ironhax, loaded FTP-3DS, exit, loaded Memchunkhax2, DEADCAFE, Press Start to exit :)
 
CrispyYoshi
Works for me. Browserhax on 10.3.0-28J on a N3DS (J). Didn't work until I ran FTBrony, exit, then entered the app afterward.

Would try Ironhax but unfortunately Ironfall isn't free in this region...

EDIT: I should mention, though: I can't press START to exit the app... I think it crashed on me?
 
A
O3DS 10-3-0-28U

-Ninjhax
00000000
-With FTP-3DS workaround
Stuck on Map Complete (had to force shutdown)

-Ironhax
Stuck on Map Complete (had to force shutdown)
-With FTP-3DS workaround
Same

-Browserhax
00000000 (Failed to allow threads on core 1) (had to force shutdown)

WHAT.DO
 
  • Like
Reactions: 1 person
A
UPDATE

got it working with Ninjhax and Ironhax

got DEADCAFE on o3DS 10.3

seems to work at random though
 
Pandaxclone2
@AguirreMA You can get menuhax on 10.3 now so give that a try too. That one seems to be the most consistent in producing DEADCAFE but like the rest needs a forced shutdown.
 
Pandaxclone2
@GalladeGuy Basically debugging memchunkhax2 with what model, firmware and region works or doesn't. Currently doesn't do anything but gives back a Y/N response.
 
dankzegriefer
TEST RESULTS:

OOT3DHax
Works with FTBrony/FTP-3DS 10.2.0-28U
RESULT: DEADCAFE
Ironhax
Works with FTBrony/FTP-3DS 10.2.0-28U
RESULT: DEADCAFE
Browserhax
Failed to allow threads on core 1. 10.2.0-28U
Lock up, forced reset
FAILED.
Menuhax
Got to map complete then text corrupted (FIRST TRY with FTBrony).
RESULT DEADCAFE (SECOND TRY with FTBrony).
 
Acryt
N3DSXL. 9.9.0.26U,FTPBRONY
result was Deadcafe, after 1 or 2 tries. Locked up though and had to force power off the ds.
Locks up during several attempts though. Doesn't seem to be consistent.
 
Nikki_swap
N3DS 9.9.0U got dead cafe after a third try but only as a boot.3dsx and menuhax, got stuck after I tried to restart
 

Blog entry information

Author
ihaveahax
Views
6,542
Comments
1,932
Last update

More entries in Personal Blogs

More entries from ihaveahax

Share this entry

General chit-chat
Help Users
  • No one is chatting at the moment.
    AncientBoi @ AncientBoi: :rofl2: +2