Hardware USB port mod

TariqSoftDev

TariqSoftDev

~Zexceil
OP
Member
Level 7
Joined
Sep 18, 2013
Messages
716
Trophies
1
Location
London
XP
1,018
Country
yifan_lu said:
I didn't look at your photos until now but why did you solder to the modem and not the motherboard? It obviously won't work that way because you're basically taking one USB cable and putting two devices on it.
Click to expand...
I looked at the modem and noticed the USB D- and D+ is cut off , I'll do that then , solder directly to the MB now
 
TariqSoftDev

TariqSoftDev

~Zexceil
OP
Member
Level 7
Joined
Sep 18, 2013
Messages
716
Trophies
1
Location
London
XP
1,018
Country
Alright soldered directly @yifan_lu updating the main thread take a look , your program told me something (give me 5 mins) and the PS Vita said "This device is not supported"

--------------------- MERGED ---------------------------

Updated ~ Read main thread section.
 
TariqSoftDev

TariqSoftDev

~Zexceil
OP
Member
Level 7
Joined
Sep 18, 2013
Messages
716
Trophies
1
Location
London
XP
1,018
Country
yifan_lu said:
Can you reboot the Vita, use henkaku, but don't open vitashell, launch usb_detect directly and see if you get any new output?
Click to expand...
Alright on it rn

--------------------- MERGED ---------------------------

yifan_lu said:
Can you reboot the Vita, use henkaku, but don't open vitashell, launch usb_detect directly and see if you get any new output?
Click to expand...
Results:
Started!

Press X to start probing.
Press Circle to stop probing and exit.

Kernel start: 0, 0
Kernel start: 0, 0
User load & start: 4001009f, 0
taiHookFunctionExportForKernel: 0x00013FC9
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
Device found: 10002
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
device found: 10002
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040


Previously:

Started!

Press X to start probing.
Press Circle to stop probing and exit.

Kernel start: 0, 0
Kernel start: 0, 0
User load & start: 4001009f, 0
taiHookFunctionExportForKernel: 0x000E2EC9
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
Device found: 10001
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
device found: 10001
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
 
Last edited by TariqSoftDev,
Y

yifan_lu

@yifanlu
Member
Level 9
Joined
Apr 28, 2007
Messages
663
Trophies
0
XP
1,671
Country
United States
TariqSoftDev said:
Alright on it rn

--------------------- MERGED ---------------------------


Results:
Started!

Press X to start probing.
Press Circle to stop probing and exit.

Kernel start: 0, 0
Kernel start: 0, 0
User load & start: 4001009f, 0
taiHookFunctionExportForKernel: 0x00013FC9
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
Device found: 10002
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040
device found: 10002
ksceUsbdGetDescriptor-patched(65538, 0, 0x01): 0x0263E040


Previously:

Started!

Press X to start probing.
Press Circle to stop probing and exit.

Kernel start: 0, 0
Kernel start: 0, 0
User load & start: 4001009f, 0
taiHookFunctionExportForKernel: 0x000E2EC9
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
Device found: 10001
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
device found: 10001
ksceUsbdGetDescriptor-patched(65537, 0, 0x01): 0x026B2040
Click to expand...
I just found a bug in my code. Can you try this?
 

Attachments

  • usb_detect.vpk.zip
    33.5 KB · Views: 195
TariqSoftDev

TariqSoftDev

~Zexceil
OP
Member
Level 7
Joined
Sep 18, 2013
Messages
716
Trophies
1
Location
London
XP
1,018
Country
@yifan_lu Sorry about that, fell asleep , Just tried it here are the results:
Device found: 10002
ksceUsbdGetDescriptor_patched(65538, 0, 0x01): 0x0263E040
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40
idVendor: 0x0781
idProduct: 0x5406
bcdDevice: 0x0200
iManufacturer: 0x01
bNumConfigurations: 0x01
 
Y

yifan_lu

@yifanlu
Member
Level 9
Joined
Apr 28, 2007
Messages
663
Trophies
0
XP
1,671
Country
United States
TariqSoftDev said:
@yifan_lu Sorry about that, fell asleep , Just tried it here are the results:
Device found: 10002
ksceUsbdGetDescriptor_patched(65538, 0, 0x01): 0x0263E040
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40
idVendor: 0x0781
idProduct: 0x5406
bcdDevice: 0x0200
iManufacturer: 0x01
bNumConfigurations: 0x01
Click to expand...
Okay so it recognizes your Sandisk drive. But VitaShell doesn't for some reason. Can you try another drive formatted fat32/exfat with this and vitashell?
 
TariqSoftDev

TariqSoftDev

~Zexceil
OP
Member
Level 7
Joined
Sep 18, 2013
Messages
716
Trophies
1
Location
London
XP
1,018
Country
yifan_lu said:
Okay so it recognizes your Sandisk drive. But VitaShell doesn't for some reason. Can you try another drive formatted fat32/exfat with this and vitashell?
Click to expand...
Tried it again with 2 other USB devices with the formats FAT, exFAT , FAT32 , same results and PS Vita says "This device is not supported"
 
TariqSoftDev

TariqSoftDev

~Zexceil
OP
Member
Level 7
Joined
Sep 18, 2013
Messages
716
Trophies
1
Location
London
XP
1,018
Country
yifan_lu said:
Nothing with VitaShell mounting?
Click to expand...
nope , I got a idea but I can put it into words , attempting to change a part of VShell for this.

--------------------- MERGED ---------------------------

Can't we use the VitaSDK serial com , usb apis to mount the USB with a separate program?
 
A

aclearersky

Well-Known Member
Member
Level 3
Joined
May 29, 2013
Messages
110
Trophies
1
Age
37
XP
236
Country
United States
Really hope you get this to work. Im holding off on buying a memory card till i see how this unfolds. Always love tearing stuff apart and soldering :)
 
D

damian12

Member
Newcomer
Level 1
Joined
Jan 14, 2015
Messages
5
Trophies
0
Age
48
XP
119
Country
Hi,
could this work with a wifi only vita? soldering direct to the pads where the connector is on the 3g model or are there some other components missing?
 
FX3200

FX3200

Well-Known Member
Newcomer
Level 2
Joined
Sep 14, 2016
Messages
71
Trophies
0
XP
198
Country
Czech Republic
hello,
because i dont want to soldering to vita board i create simple pins out board for USB, if come to work in future i build in sd card reader to vita SIM slot. in last photo is yifan_lu usb_detect.vpk i dont no if is right result :)

DSC00023.jpg DSC00027.jpg DSC00028.jpg DSC00030.jpg
 
Darthsternie

Darthsternie

Well-Known Member
Newcomer
Level 3
Joined
May 18, 2015
Messages
65
Trophies
0
Location
Somewhere
Website
www.darthsternie.net
XP
331
Country
Germany
So... Before I do dumb stuff. If I remember correctly the Wifi Version also has those pins just not with a PCIe connector soldered to it. Anyone know if this would theoretically be possible on a Wifi Vita and can you please make a better picture of the Fixed version. I can't really see which Pins you soldered to. Thanks a lot :)
 

Site & Scene News

Go to forum More news

Popular threads in this forum

OK, so I've just downloaded and installed the notorious Thrill Kill on Adrenaline...

Blasphemous released for Vita

PSVita internet over USB?

Odin Sphere HD texture Vita3K

Question about spoofing FW

Misc  Linux QCMA connection stopped working.

Anyone tried replacement sticks from AliExpress (or cheap Chinese knockoffs)

Homebrew game  [REQUEST] Forza horizon 1 for ps vita

General chit-chat
Help Users
  • Psionic Roshambo @ Psionic Roshambo:
    I wonder if that was the point of game streaming
  • Psionic Roshambo @ Psionic Roshambo:
    But it's a dead end
  • Xdqwerty @ Xdqwerty:
    @Psionic Roshambo, people who cant download it can still play the game
  • BigOnYa @ BigOnYa:
    If your internet speeds are fast enough. Streaming 4k takes alot. I used to only have 20mb sec, and 4k struggled. Now I have 300mb sec and 4k plays fine.
     +1
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, i only have like 1 or 2 mb sec
  • BigOnYa @ BigOnYa:
    Did you feed the hamster in your internet router? It prob died and is running slow now.
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, why did you start saying my pc has a hamster in the first place?
     +1
  • BigOnYa @ BigOnYa:
    Its actua!ly just a old joke, meaning its slow. Was just kidding around with you.
     +1
  • BigOnYa @ BigOnYa:
    I bet @AncientBoi has some hamsters hidden somewhere tho....
     +2
  • AncientBoi @ AncientBoi:
    🍳 them
     +2
  • Psionic Roshambo @ Psionic Roshambo:
    I think Game streaming should work like this.... Local Hardware able the run the game fine, game engine and common assets stored locally, all FMV and music and textures could be streaming
     +1
  • Psionic Roshambo @ Psionic Roshambo:
    Some temporary storage
  • Xdqwerty @ Xdqwerty:
    also @BigOnYa im making some progress on my gdevelop project, implemented various mechanics
  • Psionic Roshambo @ Psionic Roshambo:
    They went all in on streaming, should have been more of a hybrid approach
     +1
  • BigOnYa @ BigOnYa:
    Or free government supplied high speed internet be nice also. Like Obama care. Xdqwerty that's cool, its time consuming but rewarding once done or playable, to see what you've made from scratch. Animations take forever, but worth it.
     +1
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, although the bullets are a bit buggy
     +1
  • Psionic Roshambo @ Psionic Roshambo:
    Not to mention this would be a massive pain to pirate
  • Xdqwerty @ Xdqwerty:
    @BigOnYa,
    and the visual aspect of the game is quite crude (the sprite that looks best is that of the protagonist just because he is a stickman with sunglasses)
     +1
  • BigOnYa @ BigOnYa:
    There is a bullets behaviour you assign to your character, that makes the code easier, under "behaviours"
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, ik
     +1
  • Xdqwerty @ Xdqwerty:
    i meant that when the character is pointing to the right, the bullets spawn where they should, but when he is on the right, they move to the right but the spawn point is incorrect
  • BigOnYa @ BigOnYa:
    Itch.io has lots of free assets also. Under the bullets behavior tab, there is a "rotate bullets" option, can try that. Or in the code can try
    - fire bullet Player.X(PlayerDirection)
  • Xdqwerty @ Xdqwerty:
    im taking a break for today anyway
     +1
  • BigOnYa @ BigOnYa:
    YEa gotta after a while, looking at code for long periods will bug your eyes.
     +1
  • BigOnYa @ BigOnYa:
    That's cool tho, I'm proud of you going back to it, not giving up. It is difficult at first to learn, but fun once you get the hang of it. I think I've watched every tutorial video there is, but I still struggle sometimes to get stuff to work right. But gotta keep trying dif things, and eventually you will get it right.
     +1
    BigOnYa @ BigOnYa: That's cool tho, I'm proud of you going back to it, not giving up. It is difficult at first to... +1