Hello,
I've translated a TuT of: "How to Donwgrade MSET On N3DS Without Gateway!"
To german because I some users are german and dont understand everything.
Of course will it only works on the N3DS on 9.0-9.2.
I'll link the original English TuT and my Own German Translation as Download and here:
The German Text form my Own:
And here the English Text :
The Download Files:
German:
English:
The Donwload Files are going with a Offline PDF TuT
Ps: The Files and the English TuT Isnt by Me, I only made the Translation and want to Help!
I hope I can help someone who need this TuT.
I've translated a TuT of: "How to Donwgrade MSET On N3DS Without Gateway!"
To german because I some users are german and dont understand everything.
Of course will it only works on the N3DS on 9.0-9.2.
I'll link the original English TuT and my Own German Translation as Download and here:
The German Text form my Own:
Einstellung für Emunand + Reinand + Mset exploit (Profil > cfw launcher)
DEN NEW 3DS JEDESMAL AUSSCHALTEN VOR DEM ENTNEHMEN DER SD CARD!!!
Man benötigt WIFI im SystemNAND um den QR code zu lesen.
Key:
SysNAND: Die ECHTE NICHT EMULIERTE FW vom 3DS (NICHT UPDATEN!!!)
EmuNAND: Die Emulierte FW vom 3DS (Immer prüfen vor dem Updatevorgang!)
Root: Der Hauptordner der SD Card
http://smealum.net/ninjhax/ NINJHAX QR CODE
Um den Spielstand von Cubic Ninja zu löschen vor dem Start L + R + X + Y drücken.
Anleitung ohne GATEWAY Karte
Schritt 1: SysNAND sichern und EmuNAND Partition erstellen.
Kopiere die Benötigen Dateien ins Root Verzeichnis: "Root of mSD - (Deine 3DS' region)"
Starte Cubic Ninja & wähle: Create > QR Code > Scan the QR code from folder: Gateway Cubic Ninja QR > EUR_US / JAP. 1 Mal gescannt wird der "Gateway Lancher" Starten
Im "Gateway Menu" Backup Sysnand auswählen.
Nachdem dies Fertig ist UNTEN und START drücken/Halten um den 3DS auszuschalten.
Verbinde nun die SD Card mit deinem Computer und sicher die NAND.BIN (Dies ist eine Sicherheits-Kopie von der FW des 3DS' Falls dieser einen Brick hat*Nur mit einen ''Hardmod ausführbar'')
Starte Cubic Ninja > Create > QR code > Gateway menu
Dann "Create Emunand" auswählen(ACHTUNG: Dies Formatiert die SD Card!(Eine Sicherung der SD Card ist zu raten!)
Nachdem dies Fertig ist UNTEN und START drücken/Halten um den 3DS auszuschalten.
Nun Kopiere die Sicherung der SD Card wieder ins Root Verzeichnis:
"Root of mSD - (Deine 3DS' region)"
Schritt 2: SysNAND
Gehe zu http://smealum.net/ninjhax/ mit deinem PC & befolge die Anweisungen (Die FW deines Nintedo's eingeben , Dateien sind in der Anleitung /Ordner enthalten.)
Starte Cubic Ninja > Lösche den Spielstand > Scane den QR Code von Cubic Ninja. 1 Mal eingecannt wird dieser den "Homebre Launcher" Starten / Booten.
Halte [L] und starte Pasta CFW mit [A] - Select Optons - Enable FirmLaunch [NO] - Boot Pasta "Give me some Pasta"
Starte Cubic Ninja > Create > QR code/Homebre Launcher Starten > Starte FBI
FBI: Installiere Devmenu.cia zur SD Card, > Nachem es Fertig ist drücke [Start] um "FBI" zu beenden.
*Falls du einen Fehler erhälst mit der Beschreibung: Database_does_not_exist > Connect mSD to computer go into Nintendo 3DS > Folder> Hier solltest du einen exdata Ornder sehen, erstelle einen Ordner namens "dbs" daneben. Im "dbs" Ordner, erstelle 2 .txt Dateien title.db & import.db)
*Stecke die SD Card in den New 3DS wieder rein und wähle > System Einstellungen> Data Management > Nintendo 3DS > Software aus -Das System wird nun die .txt Dateien passend bearbeiten. Nun versuche es mit FBI erneut & installiere Devmenu.cia
Starte Pasta cfw > Start Devmenu
Gehe zum Tab Import > Wähle mset_(region).cia aus und bestätige mit [A] > Wähle OK aus sobald es abgeschlossen ist > Schalte den N3DS mit dem Power button aus.
Schritt 3: Installieren von ReiROP Auf dem SysNAND für den DS Profil Exploit
Starte Cubic Ninja > Create > QR code > Pasta > Cubic Ninja > Create > QR code > FBI
Drücke [Select] > Benutze Links /Rechts und wähle "Reinand N3DS 4.x MSET" aus und drücke [A]
Drücke [Start] um FBI zu beenden und Schalte den N3DS aus.
Schritt 4: Starten in ReiNAND (EmuNAND)
Gehe zu System Einstellungen > Andere Einstellungen > Profile > NDS Profile > "Drücke START um zu Booten."
WICHTIG: Der NDS Exploit wird JEDES MAL entfernt wenn man NDS Spiele Spielt In diesem Fall muss man Schritt 3 wiederholen!
Schritt 5: Trennen von SysNAND vom EmuNAND (Optional)
Schalte den N3DS aus > Entferne die MSD > Schalten den 3DS wieder ein >System Einstellungen > Andere Einstellungen > Formatieren > Anweisungen befolgen >N3DS ausschalten
MSD in den N3DS wieder einstecken. Dein SysNAND ist nun vom EmuNAND getrennt: Um dies zu Überprüfen kann man Ordner erstellen die es im EmuNAND nicht gibt oder im SysNAND/EmuNAND das Theme ändern damit man erkennt im welchem NAND man ist.
*Grund um den SysNAND vom EmuNAND zu Trennen: Es gibt einen Bug dass jedes installieres Spiel als ''Geschenk'' immer erscheint wenn man den EmuNAND bootet **Den SysNAND vom EmuNAND zu trennen erfordert eine weitere NNID (Nintendo Network ID) und erstellt einen neuen Freundes Code
.DEN NEW 3DS JEDESMAL AUSSCHALTEN VOR DEM ENTNEHMEN DER SD CARD!!!
Man benötigt WIFI im SystemNAND um den QR code zu lesen.
Key:
SysNAND: Die ECHTE NICHT EMULIERTE FW vom 3DS (NICHT UPDATEN!!!)
EmuNAND: Die Emulierte FW vom 3DS (Immer prüfen vor dem Updatevorgang!)
Root: Der Hauptordner der SD Card
http://smealum.net/ninjhax/ NINJHAX QR CODE
Um den Spielstand von Cubic Ninja zu löschen vor dem Start L + R + X + Y drücken.
Anleitung ohne GATEWAY Karte
Schritt 1: SysNAND sichern und EmuNAND Partition erstellen.
Kopiere die Benötigen Dateien ins Root Verzeichnis: "Root of mSD - (Deine 3DS' region)"
Starte Cubic Ninja & wähle: Create > QR Code > Scan the QR code from folder: Gateway Cubic Ninja QR > EUR_US / JAP. 1 Mal gescannt wird der "Gateway Lancher" Starten
Im "Gateway Menu" Backup Sysnand auswählen.
Nachdem dies Fertig ist UNTEN und START drücken/Halten um den 3DS auszuschalten.
Verbinde nun die SD Card mit deinem Computer und sicher die NAND.BIN (Dies ist eine Sicherheits-Kopie von der FW des 3DS' Falls dieser einen Brick hat*Nur mit einen ''Hardmod ausführbar'')
Starte Cubic Ninja > Create > QR code > Gateway menu
Dann "Create Emunand" auswählen(ACHTUNG: Dies Formatiert die SD Card!(Eine Sicherung der SD Card ist zu raten!)
Nachdem dies Fertig ist UNTEN und START drücken/Halten um den 3DS auszuschalten.
Nun Kopiere die Sicherung der SD Card wieder ins Root Verzeichnis:
"Root of mSD - (Deine 3DS' region)"
Schritt 2: SysNAND
Gehe zu http://smealum.net/ninjhax/ mit deinem PC & befolge die Anweisungen (Die FW deines Nintedo's eingeben , Dateien sind in der Anleitung /Ordner enthalten.)
Starte Cubic Ninja > Lösche den Spielstand > Scane den QR Code von Cubic Ninja. 1 Mal eingecannt wird dieser den "Homebre Launcher" Starten / Booten.
Halte [L] und starte Pasta CFW mit [A] - Select Optons - Enable FirmLaunch [NO] - Boot Pasta "Give me some Pasta"
Starte Cubic Ninja > Create > QR code/Homebre Launcher Starten > Starte FBI
FBI: Installiere Devmenu.cia zur SD Card, > Nachem es Fertig ist drücke [Start] um "FBI" zu beenden.
*Falls du einen Fehler erhälst mit der Beschreibung: Database_does_not_exist > Connect mSD to computer go into Nintendo 3DS > Folder> Hier solltest du einen exdata Ornder sehen, erstelle einen Ordner namens "dbs" daneben. Im "dbs" Ordner, erstelle 2 .txt Dateien title.db & import.db)
*Stecke die SD Card in den New 3DS wieder rein und wähle > System Einstellungen> Data Management > Nintendo 3DS > Software aus -Das System wird nun die .txt Dateien passend bearbeiten. Nun versuche es mit FBI erneut & installiere Devmenu.cia
Starte Pasta cfw > Start Devmenu
Gehe zum Tab Import > Wähle mset_(region).cia aus und bestätige mit [A] > Wähle OK aus sobald es abgeschlossen ist > Schalte den N3DS mit dem Power button aus.
Schritt 3: Installieren von ReiROP Auf dem SysNAND für den DS Profil Exploit
Starte Cubic Ninja > Create > QR code > Pasta > Cubic Ninja > Create > QR code > FBI
Drücke [Select] > Benutze Links /Rechts und wähle "Reinand N3DS 4.x MSET" aus und drücke [A]
Drücke [Start] um FBI zu beenden und Schalte den N3DS aus.
Schritt 4: Starten in ReiNAND (EmuNAND)
Gehe zu System Einstellungen > Andere Einstellungen > Profile > NDS Profile > "Drücke START um zu Booten."
WICHTIG: Der NDS Exploit wird JEDES MAL entfernt wenn man NDS Spiele Spielt In diesem Fall muss man Schritt 3 wiederholen!
Schritt 5: Trennen von SysNAND vom EmuNAND (Optional)
Schalte den N3DS aus > Entferne die MSD > Schalten den 3DS wieder ein >System Einstellungen > Andere Einstellungen > Formatieren > Anweisungen befolgen >N3DS ausschalten
MSD in den N3DS wieder einstecken. Dein SysNAND ist nun vom EmuNAND getrennt: Um dies zu Überprüfen kann man Ordner erstellen die es im EmuNAND nicht gibt oder im SysNAND/EmuNAND das Theme ändern damit man erkennt im welchem NAND man ist.
*Grund um den SysNAND vom EmuNAND zu Trennen: Es gibt einen Bug dass jedes installieres Spiel als ''Geschenk'' immer erscheint wenn man den EmuNAND bootet **Den SysNAND vom EmuNAND zu trennen erfordert eine weitere NNID (Nintendo Network ID) und erstellt einen neuen Freundes Code
And here the English Text :
Setting up Emunand + Reinand + Mset exploit (Profile > cfw launcher)
Power off the N3DS before removing the internal mSD each time.
You will need to setup a wifi access point to the Sysnand for QR code use
Key:
Sysnand: Basically the 3DS' Operating System
Emunand: Emulated clone of the Sysnand installed to the 3DS' internal SD
Root: The base of the mSD when plugged into the computer
http://smealum.net/ninjhax/ for NINJHAX QR CODE
To wipe the save (QR code) of Cubic Ninja - L + R + X + Y
PROCESS WITHOUT GATEWAY
Step 1: Backing up Sysnand & Creating Emunand partition
Copy the contents of folder: "Root of mSD - (Your 3DS' region)" to the root of your mSD
Start Cubic Ninja & select: Create > QR Code > Scan the QR code from folder: Gateway Cubic Ninja QR > EUR_US / JAP. Once scanned the QR code will boot up the Gateway Menu.
In Gateway Menu move to Backup Sysnand.
Once complete press Down + Start to quick shutdown the system.
Connect the mSD to your computer and make a backup of your NAND.BIN (Incase you ever brick your 3DS, this is what you'll need to bring it back *Along with a hardmod*)
Start Cubic Ninja > Create > QR code > Gateway menu
Move to Create Emunand (This will wipe the contents of the mSD)
Once complete press Down + Start to quick shutdown the system.
Copy the contents of folder: "Root of mSD - (Your 3DS' region)" to the root of your mSD again.
Step 2: Prepping Sysnand
Go to http://smealum.net/ninjhax/ on your computer & input your 3DS' exact firmware *Located in System Settings*
Start Cubic Ninja > Wipe the save > Scan the QR code from Ninjhax. Once scanned the QR code will boot up the Homebrew Menu
Hold [L] start Pasta CFW with [A] - Select Optons - Enable FirmLaunch [NO] - Boot Pasta "Give me some Pasta"
Start Cubic Ninja > Create > QR code > Start FBI
FBI: Install Devmenu.cia to SD, > Once done press [Start] to exit
*If you get Error Description: Database_does_not_exist > Connect mSD to computer go into Nintendo 3DS > Folder> Here you should see exdata folder, create a folder named "dbs" next to it. Inside dbs create two txt files named (title.db & import.db)
*Insert the mSD & turn the 3DS back on > System Settings > Data Management > Nintendo 3DS > Software - The system will add the necessary data to the files you created. Now you can go back to FBI & install Devmenu.cia
Start Pasta cfw > Start Devmenu
Move to tab Import > Select mset_(region).cia with [A] > Ok when complete > (here you can also install bluecardfix.cia if you have a NDS flashcard that is blocked in 9.x), Hold down power button to turn the system off
Step 3: Installing ReiROP to Sysnand for Profile exploit
Method A: (no NDS flashcard)
Start Cubic Ninja > Create > QR code > Pasta > Cubic Ninja > Create > QR code > FBI
Press [Select] > Use left / right to change to "Reinand N3DS 4.x MSET" > Press [A]
[Start] to exit FBI & Power off the system by holding the power button.
Method B: (Requires NDS Flashcard)
Move contents of "For NDS Flashcart" to the mSD of your NDS flashcart.
Star the flashcart > Open folder rnInstaller > Select: 4.x N3DS DG ReiNand > Press [A]
Step 4: Booting into Reinand (Emunand)
Go to System Settings > Other Settings > Profile > NDS Profile > "Press Start to boot."
If the NDS profile exploit is ever removed (happens when playing NDS games) you will need to repeat step 3
Step 5: Unlinking Sysnand from Emunand (Optional)
Turn off the system > remove mSD > System Settings > Other Settings > Format System Memory > Go through initial setup process > turn off system
Insert your mSD & start up the system. Your Sysnand and Emunand will now be unlinked. To confirm this, you can change the theme color of the Sysnand or create a folder(s) on the home menu > Boot into Emunand and the theme / folders won't transfer over.
*Reason to unlink Sys & Emunand - Installed games / apps on a linked system will require you to unwrap packages every time you boot into emunand.
**Unlinking the Sys and Emunand will create a new friend code for the Sysnand as well as wipe your NNID from that Nand.
Power off the N3DS before removing the internal mSD each time.
You will need to setup a wifi access point to the Sysnand for QR code use
Key:
Sysnand: Basically the 3DS' Operating System
Emunand: Emulated clone of the Sysnand installed to the 3DS' internal SD
Root: The base of the mSD when plugged into the computer
http://smealum.net/ninjhax/ for NINJHAX QR CODE
To wipe the save (QR code) of Cubic Ninja - L + R + X + Y
PROCESS WITHOUT GATEWAY
Step 1: Backing up Sysnand & Creating Emunand partition
Copy the contents of folder: "Root of mSD - (Your 3DS' region)" to the root of your mSD
Start Cubic Ninja & select: Create > QR Code > Scan the QR code from folder: Gateway Cubic Ninja QR > EUR_US / JAP. Once scanned the QR code will boot up the Gateway Menu.
In Gateway Menu move to Backup Sysnand.
Once complete press Down + Start to quick shutdown the system.
Connect the mSD to your computer and make a backup of your NAND.BIN (Incase you ever brick your 3DS, this is what you'll need to bring it back *Along with a hardmod*)
Start Cubic Ninja > Create > QR code > Gateway menu
Move to Create Emunand (This will wipe the contents of the mSD)
Once complete press Down + Start to quick shutdown the system.
Copy the contents of folder: "Root of mSD - (Your 3DS' region)" to the root of your mSD again.
Step 2: Prepping Sysnand
Go to http://smealum.net/ninjhax/ on your computer & input your 3DS' exact firmware *Located in System Settings*
Start Cubic Ninja > Wipe the save > Scan the QR code from Ninjhax. Once scanned the QR code will boot up the Homebrew Menu
Hold [L] start Pasta CFW with [A] - Select Optons - Enable FirmLaunch [NO] - Boot Pasta "Give me some Pasta"
Start Cubic Ninja > Create > QR code > Start FBI
FBI: Install Devmenu.cia to SD, > Once done press [Start] to exit
*If you get Error Description: Database_does_not_exist > Connect mSD to computer go into Nintendo 3DS > Folder> Here you should see exdata folder, create a folder named "dbs" next to it. Inside dbs create two txt files named (title.db & import.db)
*Insert the mSD & turn the 3DS back on > System Settings > Data Management > Nintendo 3DS > Software - The system will add the necessary data to the files you created. Now you can go back to FBI & install Devmenu.cia
Start Pasta cfw > Start Devmenu
Move to tab Import > Select mset_(region).cia with [A] > Ok when complete > (here you can also install bluecardfix.cia if you have a NDS flashcard that is blocked in 9.x), Hold down power button to turn the system off
Step 3: Installing ReiROP to Sysnand for Profile exploit
Method A: (no NDS flashcard)
Start Cubic Ninja > Create > QR code > Pasta > Cubic Ninja > Create > QR code > FBI
Press [Select] > Use left / right to change to "Reinand N3DS 4.x MSET" > Press [A]
[Start] to exit FBI & Power off the system by holding the power button.
Method B: (Requires NDS Flashcard)
Move contents of "For NDS Flashcart" to the mSD of your NDS flashcart.
Star the flashcart > Open folder rnInstaller > Select: 4.x N3DS DG ReiNand > Press [A]
Step 4: Booting into Reinand (Emunand)
Go to System Settings > Other Settings > Profile > NDS Profile > "Press Start to boot."
If the NDS profile exploit is ever removed (happens when playing NDS games) you will need to repeat step 3
Step 5: Unlinking Sysnand from Emunand (Optional)
Turn off the system > remove mSD > System Settings > Other Settings > Format System Memory > Go through initial setup process > turn off system
Insert your mSD & start up the system. Your Sysnand and Emunand will now be unlinked. To confirm this, you can change the theme color of the Sysnand or create a folder(s) on the home menu > Boot into Emunand and the theme / folders won't transfer over.
*Reason to unlink Sys & Emunand - Installed games / apps on a linked system will require you to unwrap packages every time you boot into emunand.
**Unlinking the Sys and Emunand will create a new friend code for the Sysnand as well as wipe your NNID from that Nand.
The Download Files:
German:
Here the German Dropbox Link : "Click"
English:
Here the English Dropbox Link : "Click"
Ps: The Files and the English TuT Isnt by Me, I only made the Translation and want to Help!
I hope I can help someone who need this TuT.
Last edited by Phil5004,