Well I just completed the software for the Lilygo T-Dongle-S3-main.
What a fantasitic bit of kit. it's got 16M of flash so loads of space for all your payloads. Bluetooth and microd sd card slot as well as an addressable RGB led and a button and last but not least a TFT screen.
Here's some screenshots (sorry about the quality as my phone camera was having issues focusing because of the leds changing colours routine I programmed in).
Size Comparisson with sd card
Scrolling Text
Recovery Mode
Display Images
My Logo
Programmed as follows.
1: Boot logo displays for 10 seconds, then scrolling text screen shows some info such as MAC address and chip info.
2: Addressable led cycles through all it's colours in a nice light show.
3: When glitching commences and USB is activated, the usb flashes red and blue so you know.
4: On completion of glitch - usb drive goes into deep sleep, turns off the led and tft screen.
5: Button press activates emergency recovery mode, so all the default settings are restored.
No popups/button presses duing the glitch - just start the browser and it tells you when it's done (you know anyway as the lights/screen go off).
I'll post up the code on github when I get around to it, I just need to do some minor cleanups.
What a fantasitic bit of kit. it's got 16M of flash so loads of space for all your payloads. Bluetooth and microd sd card slot as well as an addressable RGB led and a button and last but not least a TFT screen.
Here's some screenshots (sorry about the quality as my phone camera was having issues focusing because of the leds changing colours routine I programmed in).
Size Comparisson with sd card
Scrolling Text
Recovery Mode
Display Images
My Logo
Programmed as follows.
1: Boot logo displays for 10 seconds, then scrolling text screen shows some info such as MAC address and chip info.
2: Addressable led cycles through all it's colours in a nice light show.
3: When glitching commences and USB is activated, the usb flashes red and blue so you know.
4: On completion of glitch - usb drive goes into deep sleep, turns off the led and tft screen.
5: Button press activates emergency recovery mode, so all the default settings are restored.
No popups/button presses duing the glitch - just start the browser and it tells you when it's done (you know anyway as the lights/screen go off).
I'll post up the code on github when I get around to it, I just need to do some minor cleanups.
Last edited by mrdude,