i will send a better video today bc now i can’t, thanks for the help btwthen bring it back to ur installer if u dont want to take it apart
i will send a better video today bc now i can’t, thanks for the help btwthen bring it back to ur installer if u dont want to take it apart
at the end its not gonna help ur gonna have to send ur oled back to ur installer and hes gonna need to find the issue...i will send a better video today bc now i can’t, thanks for the help btw
idk bc it already happened before, it was the exact same error,a restart was enough to fix it but if i will not able to fix it then ofc i will send it to the installer, i will let u know and thanks againat the end its not gonna help ur gonna have to send ur oled back to ur installer and hes gonna need to find the issue...
its like long pulse then 3 short one, i will send the video after but it should be emmc init failwell it might work sometimes but not always like u said.
the best thing is really to send it to a installer , maybe adding a 47ohm to dat0 and cmd will help with the issue. but to know that we need the correct code.
well it might work sometimes but not always like u said.
the best thing is really to send it to a installer , maybe adding a 47ohm to dat0 and cmd will help with the issue. but to know that we need the correct code.
well it might work sometimes but not always like u said.
the best thing is really to send it to a installer , maybe adding a 47ohm to dat0 and cmd will help with the issue. but to know that we need the correct code.
I assume you have no experience on mod based on the age.I wanted to understand what the error means *=* I was playing pokemon and the switch turned off and I went to turn it on again and it gave this error
I assume you have no experience on mod based on the age.
If its the v2.73 Its mean
*=* No eMMC block 0 read (eMMC init failure?)
This usually cause by unstable connection on the CMD/CLK/Dat0.
To solve it, might need to resolder it, to make the connection more rigid.
Or if its using Dat0 adapter, might to reball it to make the connection solid.
If its oled, and you use dat0 adapter, and playing game that need to shake literally the nintendo switch such as the racing game, the connection of the adapter might loosening up. Usually we could shake it little bit and it works again. The non-easy solution is to take out the emmc, solder conductor directly on the dat0 bga pin, and reball the emmc. That will be more susceptible to shake, or any mechanical disturbance.I'm really new, I started to enter the mod area 1 year ago, but it's not me who does the soldering, but my friend who is a nano solder person, but the part of the reball dat0 means what??
Presumo que você não tenha experiência em mod com base na idade.
Se for a v2.73 é a média
*=* Nenhum bloco eMMC 0 lido (falha de inicialização do eMMC?)
Isso geralmente é causado por conexão instável no CMD/CLK/Dat0.
Para resolvê-lo, pode ser necessário resoldá-lo, para tornar a conexão mais rígida.
Ou se estiver usando o adaptador Dat0, pode reballá-lo para tornar a conexão sólida.
There are no other point in the surface layer.I know oled been doing problems with dat0 connector . I was wondering. Cant we just scratch the pcb from a more accesible point and make a solid connection? Like how we do it on V1 and V2 (not really because its already there but you get the point)
if there was such point on the board, dat0 adapter would never existI know oled been doing problems with dat0 connector . I was wondering. Cant we just scratch the pcb from a more accesible point and make a solid connection? Like how we do it on V1 and V2 (not really because its already there but you get the point)
u can drill in ur pcb , for further information look threw the thred , but otherwise the only other reliable way to get the dat0 is creat a permanent dat0 or use thos green adapters.I know oled been doing problems with dat0 connector . I was wondering. Cant we just scratch the pcb from a more accesible point and make a solid connection? Like how we do it on V1 and V2 (not really because its already there but you get the point)
Again This Has NOTHING to do With Picofly.Colleagues, does anyone know of this the solution to this problem when starting the Nintendo Switch, it goes past the 2 logos and this message appears, the console does not start
You should update the latest firmware version, it says 2.74Update V.6.3 to the Definitive Guide is now live.
You should update the latest firmware version, it says 2.74