Hacking Making Amiibo NTAG215s

[_Pro_Man_]

I made a little project that it was probably as expensive as an amiibo itself but, i believe it was worth it, at least for me.

Spoiler

That looks amazing! Care to tell us what you printed it on and how you put the ntag215 on the card?

 

[Nikki_swap]

That looks amazing! Care to tell us what you printed it on and how you put the ntag215 on the card?

the nfc tag is on the card itself, but it still looks nice.

 

[Sliter]

I made a little project that it was probably as expensive as an amiibo itself but, i believe it was worth it, at least for me.

Spoiler

woah awesome!! xD Duel disk confirmed!
Expensive as an amiibo? these cards aren't that expensive, there are they? I wanted some too hahha
The back you kept the tag ? you can make a copy and print or just glue an common card on the back heheh (ou male Robin/another artwork faced up...?)

 

[axemurderer]

I made a little project that it was probably as expensive as an amiibo itself but, i believe it was worth it, at least for me.

Spoiler

I'm also going to do this, did you buy the pvc ntag215 cards or did you use the circle tags and print your own card? I'm thinking about using makeplayingcards.com or printing out on cardstock and sticking the cards in penny sleeves.

 

[Nikki_swap]

I'm also going to do this, did you buy the pvc ntag215 cards or did you use the circle tags and print your own card? I'm thinking about using makeplayingcards.com or printing out on cardstock and sticking the cards in penny sleeves.

Spoiler

Its nothing special but it does look cool, putting the cards into sleeves will make them even better.

 

[Trill Spector]

so i have the key's loaded on tagmo 2.1 but whenever i try to write my amiibo .bins to my nfc215 chips nothing happens, like it just says place tag under phone forever, what do i do?

if its any help im trying to write with a galaxy SIII

 

[axemurderer]

so i have the key's loaded on tagmo 2.1 but whenever i try to write my amiibo .bins to my nfc215 chips nothing happens, like it just says place tag under phone forever, what do i do?

if its any help im trying to write with a galaxy SIII

This is probably a dumb question, but do you have nfc turned on? I have it off by default, as I hate having extra icons in my status bar. Are you placing the tags under the phone, near the bottom of the phone? My s5 only writes when I put the tags there.

 

[dpad_5678]

I think the only way to know is testing , or find if someone already reported something , but I think it's allright

also I would like to know about alternatives not android/smarthphone .. or better, windows or linux :B on a computer , someone have any ideia?

I'm doing a research about using skyander portal at least to read stuff with the computer but I haven't went much far ...

The Skylanders portal uses a custom (encrypted) USB protocol.

 

[Trill Spector]

This is probably a dumb question, but do you have nfc turned on? I have it off by default, as I hate having extra icons in my status bar. Are you placing the tags under the phone, near the bottom of the phone? My s5 only writes when I put the tags there.

yea i have nfc turned on, i found out the issue was the galaxy s3, my friends s5 worked fine

 

[axemurderer]

yea i have nfc turned on, i found out the issue was the galaxy s3, my friends s5 worked fine

iirc, the battery of the s3 is where the nfc is located. have you replaced the battery in it? that might be why it's not working for your phone.

 

[Nikki_swap]

yea i have nfc turned on, i found out the issue was the galaxy s3, my friends s5 worked fine

are you using a phone case by any chance? mine didnt work with the phone case on

 

[Sliter]

The Skylanders portal uses a custom (encrypted) USB protocol.

I read somewhere that only the Xbox version had this... or I'm confusing something?

 

[dpad_5678]

I read somewhere that only the Xbox version had this... or I'm confusing something?

I think that was for Infinity that the Xbox portal included encryption.

I suggest you try to port this to the Arduino with the NFC Reader/Writer.

Open source and the hardware isn't locked down.

 

[Sliter]

I think that was for Infinity that the Xbox portal included encryption.

I suggest you try to port this to the Arduino with the NFC Reader/Writer.

Open source and the hardware isn't locked down.

this is very interesting actually but I know nothing about programming these stuff XD not that learning would be a bad thing xD

well the price isn't that bad even with the dolar rate here... is something to think about ... the only problem here is that say "
May not ship to Brazil" .3.

 

[dpad_5678]

this is very interesting actually but I know nothing about programming these stuff XD not that learning would be a bad thing xD

well the price isn't that bad even with the dolar rate here... is something to think about ... the only problem here is that say "
May not ship to Brazil" .3.

The shipping I can't really help you with but Arduino is coded in C so you just need the source code of Tagmo and the NFC Reader/Writer libraries and port away.

 

[elmoemo]

I think that was for Infinity that the Xbox portal included encryption.

I suggest you try to port this to the Arduino with the NFC Reader/Writer.

Open source and the hardware isn't locked down.

I think it's for all accessories with the Xbox, they have extra security

 

[my2k2zx2]

yea i have nfc turned on, i found out the issue was the galaxy s3, my friends s5 worked fine

I didnt have any issues using Tagmo 2.1 with my Galaxy S3. It's a Sprint model if that makes any difference.

 

[Trill Spector]

iirc, the battery of the s3 is where the nfc is located. have you replaced the battery in it? that might be why it's not working for your phone.

oh i replaced the battery, thats probably the issue

 

[EmanueleBGN]

I made some custom cards
Preview: http://emanuelebgn.tumblr.com/post/139301131921
Download: https://www.mediafire.com/folder/882ia5lvaqtum/Amiibo_Cards

 

[axemurderer]

I made some custom cards
Preview: http://emanuelebgn.tumblr.com/post/139301131921
Download: https://www.mediafire.com/folder/882ia5lvaqtum/Amiibo_Cards

So I noticed that in the Smash cards, the names do not have the white line effect over them or a gradient applied to them. These still look amazing though and I will likely use these, because you made one for every amiibo. Thank you!