Hacking Luma3DS - Noob-proof 3DS Custom Firmware

[Supster131]

So, my config.ini right now is like this...

[DEFAULT]
path = /a9lh/ARN.bin
screenEnabled = 1
delay = 200
offset = 0x12000
payload = -1

[KEY_X]
path = /a9lh/Decrypt9WIP.bin
screenEnabled = 1
delay = 200
offset = 0
payload = -1

[KEY_Y]
path = /a9lh/EmuNAND9.bin
screenEnabled = 1
delay = 200
offset = 0
payload = -1

[KEY_A]
path = /a9lh/update.bin
screenEnabled = 1
delay = 200
offset = 0
payload = -1​

I copy new file from AuReiNandv3.8.1, put the fimrware.bin and firmware90.bin into rei folder, but still get the same blank flash...

Including the arm9loaderhax.bin file? (place it on your root, don't rename it.)

 

[BadBoyXxX]

i have a question i need to put all this file on my root sd?

otp.bin
Slot0x05KeyY.bin
slot0x11key96.bin
slot0x25KeyX.bin

and for what are this?

 

[Supster131]

i have a question i need to put all this file on my root sd?

otp.bin
Slot0x05KeyY.bin
slot0x11key96.bin
slot0x25KeyX.bin

and for what are this?

You don't need your OTP on your SD card (although back it up, don't lose it).
I know Slot0x05KeyY.bin is used for Decrypt9 while using it in A9LH, so I'll assume those other files do the same.

 

[Zhull]

Including the arm9loaderhax.bin file? (place it on your root, don't rename it.)

OMG, I was using arm9loaderhax.bin from BootCtr9....

Thank you very much...

So, it's now automatically load into Aureinand right? and I need to hold L to access the sysnand?

 

[Expliciate]

i have a question i need to put all this file on my root sd?

otp.bin
Slot0x05KeyY.bin
slot0x11key96.bin
slot0x25KeyX.bin

and for what are this?

The keys are for decrypt9, the otp.... is your otp.

 

[Supster131]

OMG, I was using arm9loaderhax.bin from BootCtr9....

Thank you very much...

So, it's now automatically load into Aureinand right? and I need to hold L to access the sysnand?

Yup!

 

[leonmagnus99]

guys, what can we do with the NTR folder within the "FIRMs" folder? i do have a n3ds and i installed A9LH today along with AuReinand.

i used to run NTR cia within my gw emuNAND to use clockspeed feature at times, can this be done within A9LH' Aureinand? by using that firmware located in the NTR folder? since the file is titled as 'firmware' how would i go on to use it with Aureinand though?

cause i already have a file titled 'firmware' inside the rei folder, the firmware that was inside the 'rei-n3ds' sorry if i am not so clear with my question XD

 

[Ekaitz]

@leonmagnus99 : You just replace it by the one from the NTR folder. (in the n3DS folder: 10.4 FIRM, in the NTR: 10.2 firm. Both work but only 10.2 allows to run NTR)

 

[leonmagnus99]

@leonmagnus99 : You just replace it by the one from the NTR folder. (in the n3DS folder: 10.4 FIRM, in the NTR: 10.2 firm. Both work but only 10.2 allows to run NTR)

and if i replace the firmware that i grabbed from rei-n3ds folder and copied into rei folder< with the firmware that is inside the NTR folder, then will my n3ds still boot into emuNAND or not?

like how does it function actually, i am abit confused.. as i only see file titled 'firmware' inside the NTR folder, no 10.2 / 10.4 firms XD

 

[Ekaitz]

and if i replace the firmware that i grabbed from rei-n3ds folder and copied into rei folder< with the firmware that is inside the NTR folder, then will my n3ds still boot into emuNAND or not?

like how does it function actually, i am abit confused.. as i only see file titled 'firmware' inside the NTR folder, no 10.2 / 10.4 firms XD

It will not change anything at the moment.
In the future, if games are released and need the 10.4 FIRM you may have to switch back to 10.4 but we can guess that an update of NTR will be released before that day comes.

 

[trancepara]

and if i replace the firmware that i grabbed from rei-n3ds folder and copied into rei folder< with the firmware that is inside the NTR folder, then will my n3ds still boot into emuNAND or not?

like how does it function actually, i am abit confused.. as i only see file titled 'firmware' inside the NTR folder, no 10.2 / 10.4 firms XD

NTR only works on 10.2 so there would only be a single firmware.bin inside the NTR folder.

 

[D34DL1N3R]

What is rei/loader.bin for? It wasn't in the previous build I was using.

 

[Supster131]

What is rei/loader.bin for? It wasn't in the previous build I was using.

It's the new boot manager now included with AuReiNAND.

 

[D34DL1N3R]

It's the new boot manager now included with AuReiNAND.

So not necessary with A9HL, right? Well, unless we want to use a boot loader?

 

[Expliciate]

So not necessary with A9HL, right? Well, unless we want to use a boot loader?

You need it to boot Decrypt9 through holding L+R on boot

 

[Zhull]

I can't load the Decrypt9 (key X) and Emunand9 (key Y)...
Is it normal?

 

[Saionji]

Can someone help? Il installed arm9lh setup AuReiNand and flashed my old EmuNand.
Problem is that i cant boot to Emunand but i can in to Sysnand.
Thing is that Emunand works well on CakesFW but wont boot on AuReiNand - black screen and blue led lights.

 

[Supster131]

I can't load the Decrypt9 (key X) and Emunand9 (key Y)...
Is it normal?

Without a boot manager, no. I'm not sure about loading two things, but you can load one of them with L+R.

Can someone help? Il installed arm9lh setup AuReiNand and flashed my old EmuNand.
Problem is that i cant boot to Emunand but i can in to Sysnand.
Thing is that Emunand works well on CakesFW but wont boot on AuReiNand - black screen and blue led lights.

Do you have both firmware.bin and firmware90.bin in the /rei/ folder? (make sure to use the one for your system.)

Also, are you automatically booting into sysNAND or emuNAND?

 

[Saionji]

Without a boot manager, no. I'm Do you have both firmware.bin and firmware90.bin in the /rei/ folder? (make sure to use the one for your system.)

Also, are you automatically booting into sysNAND or emuNAND?

Yes i have both... autoboot to Emunand.

 

[Supster131]

Yes i have both... autoboot to Emunand.

What firmware is your emunand on?