How to UNBRICK your N3dsXL with NO SysNAND Backup File With B9S (Sighax) and Hardmod

Hi Everyone
In this post I will try to explain you what I´ve done to unbrick my new 3ds XL without having a backup of your SysNAND... In my scenario my new3dsXL was bricked by updating the firmware from v2.1 when I was trying to install arm9lh (but i think this could unbrick any bricked console no mater how was bricked -talking about software bricks ofcourse-)
I think this could help to unbrick any bricked 3ds console using the corresponding files
I would like to share the files that I´ve used to unbrick my 3ds but I dont know if I can because Iam new on this site
Well lets get started

1- Extract your SysNAND using Win32DiskImager via hardmod and take it to a safe place in your PC (doesn´t even matter if this SysNAND is fuc..ked up it could be used as a "checkpoint" in the future)

2- Follow this guide to Install B9S (sighax) in the copy of your SysNAND via hardmod (in my case I use the 11.4 native firm as current.firm -2nd Step of the Guide- because when I updated my 3ds the v11.4 was the last firm launched by Nintendo If you dont remember which firm was the last when you updated your 3ds just try one by one)
https://3ds.guide/installing-boot9strap-(hardmod)

3-Flash back to your 3ds the copy of your SysNAND that was renamed to NAND-patched.bin as the guide says with Win32DiskImager (at this point your SysNAND already has the sighax installed and now you can launch luma chainloader)

4-Download and copy to your SDCard the latest Luma Files for Boot9Strap (sighax) and the latest Decrypt9Wip for Boot9Strap (this should be at luma/payloads and in .firm Format) and make sure the file "aeskeydb.bin" is at the "files9" folder on the root of your SDCard

5-Download the 9.2 CTRTransfer file corresponding to your console from this guide (this file has to be at the "files9" folder with his .sha file)
https://3ds.guide/9.2.0-ctrtransfer.html

6-Conect the SdCard back to your 3ds and power on the 3ds holding "start" botom to launch the luma´s chainloader and launch Decrypt9Wip and then go to "Sysnand Options>CTRNAND transfer...>Auto CTRNAND transfer" complete the combo keys and choose the CTRtransfer File and wait until finish

7-After rebooting the console it has to boot Normaly then you just have to update your firm to 11.4 and install FBI and that stuff

Iam sorry for my Bad english but i tryed to do it with out the google translate
I hope you could Unbrick your console with this info
Take care and Good luck
Pease
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
are we able to perform this now? How would I do it and what are the dangers of it. I'm not bricked, I'm just curious
I haven't seen any evidence that it works. It might only work for flashcarts that are modified already. I tried with a normal DSTwo and it didn't work.
 

Shad0w136

Well-Known Member
Newcomer
Joined
Dec 8, 2016
Messages
98
Trophies
0
Age
32
XP
171
Country
United States
I haven't seen any evidence that it works. It might only work for flashcarts that are modified already. I tried with a normal DSTwo and it didn't work.

This could be the one thing to save my bricked 2ds that is unable to use the regular recovery menu XD
 

Shad0w136

Well-Known Member
Newcomer
Joined
Dec 8, 2016
Messages
98
Trophies
0
Age
32
XP
171
Country
United States
Acekard 2i and DSTwo should be able to work but I think they'll have to be reflashed first before they can be autobooted like that.

Ahh, mind if I ask which one you would personally recommend? I would just like to know I purchased one that works, and when I do, to eventually fix my mistake xD
 

RedBlueGreen

Well-Known Member
Member
Joined
Aug 10, 2015
Messages
2,026
Trophies
1
XP
2,538
Country
Canada
Would this work with consoles that were hardbricked downgrading with the wrong firmware type (O3DS files on N3DS and vice versa)? Or would Sysnand be screwed?
 

Myria

Well-Known Member
Member
Joined
Jul 24, 2014
Messages
464
Trophies
0
Age
42
XP
851
Country
United States
It really does work. I've used it to unbrick a 3DS and to install boot9strap on a 3DS with 11.4.0.

I just don't want to say which card we're using so we can avoid a run on these carts.
 
  • Like
Reactions: asbestosGaming

zoogie

playing around in the end of life
Developer
Joined
Nov 30, 2014
Messages
8,560
Trophies
2
XP
15,000
Country
Micronesia, Federated States of
It really does work. I've used it to unbrick a 3DS and to install boot9strap on a 3DS with 11.4.0.

I just don't want to say which card we're using so we can avoid a run on these carts.
Any idea on when this will go public?
I hate asking devs that type of question but it's driving me nuts. Have a new2ds on the way.
 
Last edited by zoogie,

szczetyk

Member
Newcomer
Joined
Jan 26, 2012
Messages
21
Trophies
1
XP
477
Country
Poland
Hi probably not the right place to ask, but after doing this tutorial is there a way/software to set (edit with hxd or any other way) the console (nand) that initial settings are set (initial config)?
I have probably hardware issues with touchscreen controler / microchip so I cannot even start setting it up initially...
 

joker_77

Member
OP
Newcomer
Joined
May 25, 2017
Messages
7
Trophies
0
Age
34
XP
72
Country
Mexico
Will this fix any kind of brick? I brick one 3DS by updating using CIAs and other 3DS by using DSIWare hax to downgrade FIRM.
it should works for u just try it and reply if it worked or not !!! Advice: if you dont know how to perform a harmod on 3ds you should ask a technician to do it for you
 
  • Like
Reactions: dekuleon

joker_77

Member
OP
Newcomer
Joined
May 25, 2017
Messages
7
Trophies
0
Age
34
XP
72
Country
Mexico
Thanks for the advice, I did many hardmods, and it's a 3ds xl and a new 3ds XL, the two most easy in my opinion :)
yep Iam agree with you second advice is just that you have to save the bricked nand just to be used as a checkpoint .. good luck :)
 

dekuleon

Well-Known Member
Member
Joined
Oct 1, 2010
Messages
645
Trophies
1
Age
31
Location
where the wind makes the curve
XP
2,592
Country
Brazil
Yeah keep your original bricked dump, generate a patched one, then copy from 0x0xB130000->0xB530000 and past it into the original bricked nand backup at the same offset

This shouldn't be necessary in most cases though and just the steps in the OP should be enough

Can you help me fixing this? http://gbatemp.net/threads/weird-3ds-now-bricked-by-dsiware-method.457596/
I guess my firmware was 11.2 at that time, and doing this tutorial here with 11.2 Firm didn't solve the problem, boots in bluescreen for now.

Maybe when the DS method is released i'll be abble to fix?

Thanks!
 
  • Like
Reactions: gamesquest1

gamesquest1

Nabnut
Former Staff
Joined
Sep 23, 2013
Messages
15,153
Trophies
2
XP
12,247
Can you help me fixing this? http://gbatemp.net/threads/weird-3ds-now-bricked-by-dsiware-method.457596/
I guess my firmware was 11.2 at that time, and doing this tutorial here with 11.2 Firm didn't solve the problem, boots in bluescreen for now.

Maybe when the DS method is released i'll be abble to fix?

Thanks!
You will have to try jump through hoops backwards, figure out what was the last firmware the tools attempted to downgrade too, it's possible you used the incorrect "source" nand at the time, I have unbricked a system in a similar position but the blind hops around can be very tedious and annoying especially when there was a series of mistakes/conflicting guides and version eye, especially if you don't remember exactly what tools and options were used to arrive at the eventual brick

Personally in your position unless you want to do some mental gymnastics and tedious trial and error work I would just wait on magnethax to be released as that should fix it with no real effort involved
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • BakerMan @ BakerMan:
    i said i was sleeping...
  • BakerMan @ BakerMan:
    sleeping with uremum
  • K3Nv2 @ K3Nv2:
    Even my mum slept on that uremum
  • TwoSpikedHands @ TwoSpikedHands:
    yall im torn... ive been hacking away at tales of phantasia GBA (the USA version) and have so many documents of reverse engineering i've done
  • TwoSpikedHands @ TwoSpikedHands:
    I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
  • The Real Jdbye @ The Real Jdbye:
    @TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway
  • The Real Jdbye @ The Real Jdbye:
    and realistically they wouldn't

    be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves
  • The Real Jdbye @ The Real Jdbye:
    why the shit does the shitbox randomly insert newlines in my messages
  • Veho @ Veho:
    It does that when I edit a post.
  • Veho @ Veho:
    It inserts a newline in a random spot.
  • The Real Jdbye @ The Real Jdbye:
    never had that i don't think
  • Karma177 @ Karma177:
    do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
    trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files :wacko:)
  • The Real Jdbye @ The Real Jdbye:
    @Karma177 that sd card is 100% faulty so yes, its a bad idea
  • The Real Jdbye @ The Real Jdbye:
    even the slowest non-sdhc sd cards are a few MB/s
  • Karma177 @ Karma177:
    @The Real Jdbye it hasn't given me any error trying to write things on it so I don't really think it's faulty (pasted 40/50gb+ folders and no write errors)
  • DinohScene @ DinohScene:
    run h2testw on it
  • DinohScene @ DinohScene:
    when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying
    DinohScene @ DinohScene: when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying