Quick Question will this make it so I can do a system transfer from my o3DSes emunand to the N3DSes emunand? Or is that still impossible?
It should if not there is plenty of tutorial
Quick Question will this make it so I can do a system transfer from my o3DSes emunand to the N3DSes emunand? Or is that still impossible?
It should if not there is plenty of tutorial
from the first post in this threadSearching all around, I couldn't find a tutorial about how to do it. Unless it's right under my nose. I thought that since you can't update N3DS emuNAND past 9.4 that you can't do a system transfer
so, in other words, if both systems are in the same "compatibility range" and using the eshop access spoof, you can perform a system transfer*snip*
LIMITATIONS :
It's now stable.
Set your internet connection BEFORE and make sure it's valid.
Access the service you want after you see "finish" in the debugger.
Tested with :
-eShop
-eShop in games (update of Mii Plaza, DLCs, etc.)
-System Transfer (but the source and the target need to have a firmware in the compatiblity list) ---> a whole system transfer has been tested and it work!
-Theme Shop
TROUBLESHOOTING :
Question : The browser method doesn't work. What can I do?
Answer : Install the right version of the browser (see below).
Question : When I select my target 3DS in the System Transfer, it fails! What can I do?
Answer : Install the right version of CARDBROAD on BOTH 3DS (see below).
Compatibility list :
Source : 3.0 <---> Target : 3.0
Source : 4.0-4.5 <---> Target : 4.0-4.5
Source : 5.0-6.3 <---> Target : 5.0-6.3
Source : 7.0-8.1 <---> Target : 7.0-8.1
Source : 9.0-9.5 <---> Target : 9.0-9.5
Source : 9.6-9.7 <---> Target : 9.6-9.7
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
Browser versions :
JAP Title ID : 0004003000008802
NA Title ID : 0004003000009402
EUR Title ID : 0004003000009D02
Firmware : 9.0-9.2 (the only compatible version for the moment) ---> Version : 4096
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
CARDBROAD versions :
JAP Title ID : 0004001000020A00
NA Title ID : 0004001000021A00
EUR Title ID : 0004001000022A00
Firmware : 9.0-9.2 (the only compatible version for the moment) ---> Version : 5130(JAP)/5131(EUR/NA)
REMEMBER THAT THE EXPLOIT TO SPOOF FIRMWARE DOESN'T WORK ON HIGHER FIRMWARES THAN 9.2!
Have tried the above but i seem to be stuck on the black screen with the....
'LoadCode Loading...'
text and nothing is happening!. Is the code.bin file supposed to be copied to the root of the N3DS or GateWay SD card??
Eh, NTR is harmless, only issues are getting Cubic Ninja and the success rate of booting (which is still harmless even if it fails).Oh yeah thanks.
So you need to have a CFW installed to get it to work on the N3DS...dont like the sound of doing that really
Couldn't you have just backed up emunand, update it, do the system transfer, then inject back your emunand? Or am I forgetting something??The o3ds hack doesn't work in gateway emunand unfortunately. To get around it I flashed my 9.2 emunand to sysnand, but that's not straightforward and involves injecting firm0/1.
I was transferring to a 9.0 new3DS, so the transfer had to come from 9.0-9.2 to be compatible - the latest firmware uses a newer version of system transfer.Couldn't you have just backed up emunand, update it, do the system transfer, then inject back your emunand? Or am I forgetting something??
I look at this guide over and over, and it intimidates me each time. But it seems to become easier and easier to read through as the OP edits it.
So let me get this straight, I can do a system transfer from o3DS emunand 9.2, to N3DS emunand 9.2 using this firmware spoofing method? Or is it restricted to sysnand only? I'm dying to do a system transfer but still unsure how easy/hard it is to do, and if I should just wait for any future possibility of 9.7 emunand support on N3DS
Did you try this? I can't seem to find an answer on if this works.If I use this to buy the latest Mii Plaza DLC in NTR Mode, will it show up in myGateway emuNAND?
Yup! But for best results:
-Cold boot (Turn the 3ds completely off and back on)
-Turn off wireless
-launch browser
-clear cookies and history
-Go to loadcode.projectpokemon.org
-It'll throw a "Wireless is off" error. Close the error message and wait for the page to finish not loading. Then turn the wireless back on and refresh
-After the "Failed to load part of the page" message completely disappears, press the home button.
-It'll throw an error message. Close the message and launch the EShop.
-It should immediately give the login prompt or auto-login. If it doesn't, it will sit there for a bit and tell you to update. If that happen, try again from the start, sometimes it takes a few tries.