Hacking how to know what kind of xbox 360 slim i have

omarq8

Active Member
OP
Newcomer
Joined
May 2, 2019
Messages
43
Trophies
0
Age
37
XP
145
Country
Kuwait
my xbox 360 slim its mfr date is 12-1-2011 and i want to add mod chip what is the best modchip for if and how to know the revision for the mother bored and the hard drive is 250gb and what kind if nanad i have
 

Hayato213

Newcomer
Member
Joined
Dec 26, 2015
Messages
20,105
Trophies
1
XP
21,337
Country
United States
R.4b42b66064d7dbe4ff80216695bcf0f5


Probably this would help you identify your model.
 
  • Like
Reactions: Sypherone

Localhorst86

Robert'); DROP TABLE members;--
Member
Joined
Jul 17, 2014
Messages
2,753
Trophies
1
Location
Nintendo works for my dad
XP
5,445
Country
Germany
here's a nifty guide for identifying your xbox 360 revision:

https://weekendmodder.com/identify.html

with the slim models (Slim S) being either trinity or corona, they can both be easily modded.

In fact, both can be RGH modded without a glitch chip using RGH3.

Assuming your manufacturing date means january 12th, you'll have a trinity.
 

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,190
Country
United States
you can also easily tell between corona and trinity with the power socket as well. one consumes more power than the other, which will be on a label on the back of the console, but both use the generic figure eight power cable. I didn't see that in the link.
 

omarq8

Active Member
OP
Newcomer
Joined
May 2, 2019
Messages
43
Trophies
0
Age
37
XP
145
Country
Kuwait
R.4b42b66064d7dbe4ff80216695bcf0f5


Probably this would help you identify your model.
you can also easily tell between corona and trinity with the power socket as well. one consumes more power than the other, which will be on a label on the back of the console, but both use the generic figure eight power cable. I didn't see that in the link.
so you all told me that i have trinity with 16mb nanad so what is the best modchip for my xbox360 trinity and can i install ace v5 and what does ace v5 do?
 

DinohScene

Gay twink catboy
Global Moderator
Joined
Oct 11, 2011
Messages
22,571
Trophies
4
Location
Восторг
XP
22,982
Country
Antarctica
I'd honestly suggest go for RGH3.
It's chipless and only requires a few components to be soldered.
If you can't solder yourself, I HIGHLY recommend you bring it to a modshop or a person who knows what he/she is doing.
 

omarq8

Active Member
OP
Newcomer
Joined
May 2, 2019
Messages
43
Trophies
0
Age
37
XP
145
Country
Kuwait
You would want an ACE V3 not ACE V3+ like V4 or V5.

While I haven't done it, yet (RGH3 has only been recently released), I'd go for a chip less RGH3 mod.

I'd honestly suggest go for RGH3.
It's chipless and only requires a few components to be soldered.
If you can't solder yourself, I HIGHLY recommend you bring it to a modshop or a person who knows what he/she is doing.
i want the best modchip for my xbox360 s trinity that allow me to play all the games of xbox360 and the xbox original and run all the emu so who is the best and can be re programming
 

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,190
Country
United States
patches are all the same, except offsets are different depending on mobo and dash kernel, but jrunner/xebuild.gui take care of all that by reading the nand.
 

Hayato213

Newcomer
Member
Joined
Dec 26, 2015
Messages
20,105
Trophies
1
XP
21,337
Country
United States
i want the best modchip for my xbox360 s trinity that allow me to play all the games of xbox360 and the xbox original and run all the emu so who is the best and can be re programming

If you want a modchip then go with v3, if you want chipless method go with RGH3 method.
 

DinohScene

Gay twink catboy
Global Moderator
Joined
Oct 11, 2011
Messages
22,571
Trophies
4
Location
Восторг
XP
22,982
Country
Antarctica
i want the best modchip for my xbox360 s trinity that allow me to play all the games of xbox360 and the xbox original and run all the emu so who is the best and can be re programming

None.
RGH 3 is superior as it uses the 360 itself for the "chip" part.
Not to mention one doesn't need to re-program chips once the RGH is done (chip installs), the only thing that has to be done by end users is flashing a updated hacked NAND to the console.
 

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,190
Country
United States
oh, and type of exploit matters as well, forgot about that one. not sure what it says for rgh3, since it's not listed in xebuild.gui, not sure about jrunner, when it reads a nand dump.
 

Localhorst86

Robert'); DROP TABLE members;--
Member
Joined
Jul 17, 2014
Messages
2,753
Trophies
1
Location
Nintendo works for my dad
XP
5,445
Country
Germany
i want the best modchip for my xbox360 s trinity that allow me to play all the games of xbox360 and the xbox original and run all the emu so who is the best and can be re programming
All hacks - with the exception of a drive firmware hack - will have the same end result. It doesn't matter if its a JTAG, RGH, RGH1.2, RGH 2 or RGH 3 will open your doors for launching backups and homebrew from the hard drive. A chipped RGH method has no benefit over RGH3, in my opinion. And judging from tutorials, it's not harder to implement than older RGH hacks.
 
  • Like
Reactions: godreborn

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,190
Country
United States
yeah, that's what I was trying to imply, the hacks are not chip-specific, only the stuff above are: exploit type, mobo, and dash kernel. that's how they're separated, but they'll all be read from the nand. about a decade ago, you'd have to supply that information or risk an e79 error, which is general hardware failure normally, but it also means a bad flash. it's one red blinking light at the bottom right iirc. ;)
 
  • Like
Reactions: Localhorst86

omarq8

Active Member
OP
Newcomer
Joined
May 2, 2019
Messages
43
Trophies
0
Age
37
XP
145
Country
Kuwait
patches are all the same, except offsets are different depending on mobo and dash kernel, but jrunner/xebuild.gui take care of all that by reading the nand.

If you want a modchip then go with v3, if you want chipless method go with RGH3 method.

None.
RGH 3 is superior as it uses the 360 itself for the "chip" part.
Not to mention one doesn't need to re-program chips once the RGH is done (chip installs), the only thing that has to be done by end users is flashing a updated hacked NAND to the console.

oh, and type of exploit matters as well, forgot about that one. not sure what it says for rgh3, since it's not listed in xebuild.gui, not sure about jrunner, when it reads a nand dump.

All hacks - with the exception of a drive firmware hack - will have the same end result. It doesn't matter if its a JTAG, RGH, RGH1.2, RGH 2 or RGH 3 will open your doors for launching backups and homebrew from the hard drive. A chipped RGH method has no benefit over RGH3, in my opinion. And judging from tutorials, it's not harder to implement than older RGH hacks.

yeah, that's what I was trying to imply, the hacks are not chip-specific, only the stuff above are: exploit type, mobo, and dash kernel. that's how they're separated, but they'll all be read from the nand. about a decade ago, you'd have to supply that information or risk an e79 error, which is general hardware failure normally, but it also means a bad flash. it's one red blinking light at the bottom right iirc. ;)
well thanks all for the help but i want the best modchip that gives me all i want from your opinion all
 
  • Like
Reactions: godreborn

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • SylverReZ @ SylverReZ:
    @Xdqwerty, He's a local Floridan, of course he does.
    +2
  • Xdqwerty @ Xdqwerty:
    @SylverReZ, the florida version of walter white
    +2
  • Xdqwerty @ Xdqwerty:
    @SylverReZ, also im gonna see if my previous dsi's sd card adapter still works
  • Xdqwerty @ Xdqwerty:
    so i can finally mod my new one
  • SylverReZ @ SylverReZ:
    @Xdqwerty, You do realise that just about any SD card formatted to FAT32 should work with the DSi. I think, 16GB or 32 is about enough to load all of your games.
  • Xdqwerty @ Xdqwerty:
    @SylverReZ, im using my sup m3's micro sd and it only has like 3.8 gb
  • Xdqwerty @ Xdqwerty:
    and yes its formatted
  • K3Nv2 @ K3Nv2:
    Psis pharmaceuticals could make John Goodman loose weight
    +2
  • Xdqwerty @ Xdqwerty:
    @SylverReZ, although i do still have my r4
    flashcard
  • SDA @ SDA:
    @Xdqwerty it's gone. Dead.
  • Xdqwerty @ Xdqwerty:
    @SDA, ok googled it and sad
    +1
  • Xdqwerty @ Xdqwerty:
    but how did they go bankrupt?
  • Xdqwerty @ Xdqwerty:
    or rather, why?
  • K3Nv2 @ K3Nv2:
    I'm about to buy a $200 flash cart
  • Psionic Roshambo @ Psionic Roshambo:
    I think I have a 256GB card in my 3DS lol
  • Psionic Roshambo @ Psionic Roshambo:
    It's a New 3DS XL so it's still under warranty... If it ever breaks gonna make Nintendo fix it lol You said it was new.... For eternity!!!
  • Psionic Roshambo @ Psionic Roshambo:
    But my 3DS is loaded with emulators and 3DS games and DS games and GBA games probably thousands of games in total lol
  • Xdqwerty @ Xdqwerty:
    Brb going with my dad
  • Xdqwerty @ Xdqwerty:
    @Psionic Roshambo, are most of those games shovelware?
    +1
  • K3Nv2 @ K3Nv2:
    Nah gotta buy 3 1tb SD cards for 3ds the entire libraries need archived in my home
    +1
  • SylverReZ @ SylverReZ:
    >buys x3 1TB SD cards
    >stores the entire 3DS library on them
    >installs CFW
    >realised why I wasted loads of money and resources
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    Lol no I clean my sets
  • K3Nv2 @ K3Nv2:
    Cause it's in my home ready to go
  • K3Nv2 @ K3Nv2:
    Like uremum
    K3Nv2 @ K3Nv2: Like uremum