Still not working for me unfortunately.Just updated the first post with a compiled AIO version based on @shadow256 v0.10b Script. I've done barely any testing but seems to work well.
Still not working for me unfortunately.Just updated the first post with a compiled AIO version based on @shadow256 v0.10b Script. I've done barely any testing but seems to work well.
I think this could be done easily but I don't have time to do it for now. A checkbox must be added and if it is check or uncheck (depend of the label) the script doesn't do the image conversion instructions (or don't resize the image but convert it in the correct image format, this second solution seems to be the best one) and copy the image in the appropriated folder.Any chance for an image conversion toggle? The tool likes to compress the crap out of my icons and I did some experimenting with the original non-GUI version of the tool; I was able to get that one to leave the icon alone
Tested on Atmosphere 1.1.1 on firrmware 11.0.0 and no problem, do you have updated your sig_patches for Atmosphere 1.1.1?Hi, i have tried on firmware 13.0 and AMS 1.1.1 and doesn't works anymore (in 13.0 and 1.1.0 worked fine) so i guess maybe some conflict to the new AMS.
There is some fix ti it?
Thnks!
Woww! You're right! My sigpatches was bad!Tested on Atmosphere 1.1.1 on firrmware 11.0.0 and no problem, do you have updated your sig_patches for Atmosphere 1.1.1?
You, my friend, have just made my day!! Re-saving the JPG in MS Paint did the trick!noticed the same thing. I resaved my pictures in jpg with paint, after that i could build my forwarders with "Switch Army Knife". Didn't try the other tool though.
Hi! The same thing happened to me, I made a lot of .nro files from Sega megadrive games and they all work perfectly. Then I did the same but with Snes, GBA and some applications, however none of these worked for me.I've got a fun one; it worked fine for me for like 10-15 forwarders.... now none of the forwarders that I make work.
More precisions could be interesting, I don't have time to test 15 or 30 forwarders creation. The most important thing to now is what was the settings of the last succesful game created before the script start to crash?Hi! The same thing happened to me, I made a lot of .nro files from Sega megadrive games and they all work perfectly. Then I did the same but with Snes, GBA and some applications, however none of these worked for me.
I tried to update the sigpatches again but it was still the same.
The solution was to re-download the 0.10b version pack, this time I did not do the Megadrive ones but I tried with Gba and now they work perfectly.
I did not get to try to create Snes or some other application, I will try that tomorrow but I think that, for the moment, we should have a pack of version 0.10b for different emulators.
It worked for me and I hope it worked for you and others too!
I kinda had the same thing with this tool. I'd create a couple of forwarders, and they'd work. Then I'd try something else, and it wouldn't. Nothing would work afterwards either. The only thing that would get it to start making working forwarders again was to re-extract the downloaded tool to another folder. But for me, even that wouldn't work after a while.More precisions could be interesting, I don't have time to test 15 or 30 forwarders creation. The most important thing to now is what was the settings of the last succesful game created before the script start to crash?
I think the moment I started creating forwarders from other emulators other than Megadrive it stopped working.More precisions could be interesting, I don't have time to test 15 or 30 forwarders creation. The most important thing to now is what was the settings of the last succesful game created before the script start to crash?
I replaced the file you uploaded with the corresponding one and I just created 6 more .nro files and 3 of them didn't work.I think that a file is not backuped or restored correctly in some specific case, one time I have seen that an important file was deleted but it was during my developpement tests so I haven't paid attention to this, if I find some time I will investigate.
Edit: I think the problem was that the logo image file could be deleted like I have suspected, here is a 0.11 Beta version to test.
It's note juste a file replacement, you should compile the script or launch it via Autoit.I replaced the file you uploaded with the corresponding one and I just created 6 more .nro files and 3 of them didn't work.
I have noticed that in my megadrive and snes games the Switch logo does not appear in the lower corner when opening them, however in the gba ones it is present.
Greetings!
Just a guess. Try refreshing the Title ID when making the forwarder.I've got a fun one; it worked fine for me for like 10-15 forwarders.... now none of the forwarders that I make work.