ROM Hack Fire Emblem Fates Expanded Same-Sex Marriage Patch - REVIVAL (WIP)

AnshiAneko

Member
OP
Newcomer
Joined
Jan 23, 2018
Messages
19
Trophies
0
Age
27
XP
258
Country
Czech Republic
Sorry, it’s been a while since you’ve asked but I had couldn’t find much time to sit down and test it out. Overall I have tried all I could and from my testing it seems like the supports conversations just aren’t there for me. However, it must be on my end if it’s fine on yours. Could you send me the files for the conversations between Niles and Izana and Nina and Izana? If I place them in the folder, then that might help.
Yeah, so... sorry, the problem is on my side. I'll try to get it fixed as soon as possible.

If you want help with writing supports I could try to help
That would be nice! I'll get fixed the problem with supports not showing fixed

do you know if this will work with the all paralogues unlocked patch to get kids with this new version
I don't see any reason why it shouldn't work.
 
  • Like
Reactions: pastafish

RichardTheKing

Honestly XC2>XC3...
Member
Joined
Mar 18, 2020
Messages
1,045
Trophies
1
Age
26
XP
3,203
Country
Australia
...But doesn't supporting with Niles (and whoever the girl one is; don't remember) lock you out of Kana's Paralogue, and thus Kana him/herself? And Niles' daughter? Wouldn't the same apply here?

It's a problem with Fates (and technically Awakening too, but it lacked same-sex altogether); being homosexual is disincentivised due to permanently missing out on a unit or two. If kids could be gotten another way, then the issue wouldn't exist, and same-sex marriages in Fire Emblem wouldn't seem so...wasteful...to me.
 

AnshiAneko

Member
OP
Newcomer
Joined
Jan 23, 2018
Messages
19
Trophies
0
Age
27
XP
258
Country
Czech Republic
...But doesn't supporting with Niles (and whoever the girl one is; don't remember) lock you out of Kana's Paralogue, and thus Kana him/herself? And Niles' daughter? Wouldn't the same apply here?

It's a problem with Fates (and technically Awakening too, but it lacked same-sex altogether); being homosexual is disincentivised due to permanently missing out on a unit or two. If kids could be gotten another way, then the issue wouldn't exist, and same-sex marriages in Fire Emblem wouldn't seem so...wasteful...to me.
Not really. You can either change the gender hex values of one of the parents or just use the paralogues unlocked patch. That way you'll still get kids.
 
  • Like
Reactions: RichardTheKing

GraveDesires

Member
Newcomer
Joined
Jun 12, 2016
Messages
6
Trophies
0
Age
33
XP
120
Country
Canada
I'm having issues with any of the newly added supports showing up. All of UV's original supports work when I view them in the support log, but I've tried viewing the M!Corrin S supports with Ignatius, Fuga and Yukimura, and both Felicia's and Izana's S supports with Reina and clicking the S just takes me back to the support log screen. I feel like it has something to do with the filenames not being in Japanese? All of the filenames from your archive look something like "â[âì_âLâTâëâM_ÉeÄq.bin.lz" so they didn't overwrite any preexisting files the game might be trying to read.
 
Last edited by GraveDesires,
  • Like
Reactions: BlazeMasterBM

trei

Member
Newcomer
Joined
May 25, 2021
Messages
9
Trophies
0
Age
21
XP
41
Country
United States
Okay, How can I help? (I mean where do I get the dialogue for the supports (I can also create them if you want))
 

AnshiAneko

Member
OP
Newcomer
Joined
Jan 23, 2018
Messages
19
Trophies
0
Age
27
XP
258
Country
Czech Republic
It's no problem, take your time with it.
....It took too long but hey, it should be fixed now :'D
I'm having issues with any of the newly added supports showing up. All of UV's original supports work when I view them in the support log, but I've tried viewing the M!Corrin S supports with Ignatius, Fuga and Yukimura, and both Felicia's and Izana's S supports with Reina and clicking the S just takes me back to the support log screen. I feel like it has something to do with the filenames not being in Japanese? All of the filenames from your archive look something like "â[âì_âLâTâëâM_ÉeÄq.bin.lz" so they didn't overwrite any preexisting files the game might be trying to read.
Yep, you probably extracted it not... exactly how it was supposed to be extracted, somehow. File names should be in Japanese.
 

WhippedInCream

New Member
Newbie
Joined
Mar 27, 2021
Messages
2
Trophies
0
Age
25
XP
44
Country
United States
Hi, great work! I used to read them from the document as I went so the this is really helpful.

One thing I've noticed is that Azura's supports don't work, probably due to how her conversation files are named differently. I tried messing with it myself for a bit but couldn't find an easy way to troubleshoot besides rebuilding them myself. It could be route-based, but from my testing in a Conquest file she was the only character still missing her new ones.

Doesn't really matter because it's just one character/a handful of conversations total, but thought I'd mention it
 

AnshiAneko

Member
OP
Newcomer
Joined
Jan 23, 2018
Messages
19
Trophies
0
Age
27
XP
258
Country
Czech Republic
Hi, great work! I used to read them from the document as I went so the this is really helpful.

One thing I've noticed is that Azura's supports don't work, probably due to how her conversation files are named differently. I tried messing with it myself for a bit but couldn't find an easy way to troubleshoot besides rebuilding them myself. It could be route-based, but from my testing in a Conquest file she was the only character still missing her new ones.

Doesn't really matter because it's just one character/a handful of conversations total, but thought I'd mention it
Thank you for letting me know about this! I haven't tested it yet but it should be okay now.
 
  • Like
Reactions: BlazeMasterBM

LumiereNova

New Member
Newbie
Joined
Aug 30, 2021
Messages
3
Trophies
0
Age
29
XP
32
Country
Slovakia
Hey there, could you give me an advice? Ever since I updated Luma and the firmware to 11.15, the patch doesnt seem to work for me. I think I installed it properly, but nothing is showing up supports wise. I checked Awakening but its the same there too. Thank you in advance
 

LumiereNova

New Member
Newbie
Joined
Aug 30, 2021
Messages
3
Trophies
0
Age
29
XP
32
Country
Slovakia
Can anyone give me an advice? This patch has been working properly until I updated both Luma and the firmware to 11.15. Now the supports are not showing up at all, I even checked the old SD to see if it would work, but it didnt. Did anyone have this problem? Did you managed to find a workaround? Thanks in advance
 

CursedCuttingCrater

New Member
Newbie
Joined
Aug 27, 2020
Messages
2
Trophies
0
Age
21
XP
45
Country
United States
Is there a possibility of having a .json file for the supports? You could make it with the Paragon tool and it would increase the flexibility of this expansion mod with other mods (like story rewrites and gameplay mods). I'm not really the best on Fates modding know-how, but Babysauce on Gamebanana also has a similar project in expanding on Gay Fates (you can find them on Fates' Gamebanana and AFAIK they're active) so you could ask them for help.

I've tried using both mods by fiddling with Paragon + DotNet3dsToolkit (since there is content that is unique to both mods) but it's been hard to try and merge the two without Paragon compatibility.
 

AnshiAneko

Member
OP
Newcomer
Joined
Jan 23, 2018
Messages
19
Trophies
0
Age
27
XP
258
Country
Czech Republic
Is there a possibility of having a .json file for the supports? You could make it with the Paragon tool and it would increase the flexibility of this expansion mod with other mods (like story rewrites and gameplay mods). I'm not really the best on Fates modding know-how, but Babysauce on Gamebanana also has a similar project in expanding on Gay Fates (you can find them on Fates' Gamebanana and AFAIK they're active) so you could ask them for help.

I've tried using both mods by fiddling with Paragon + DotNet3dsToolkit (since there is content that is unique to both mods) but it's been hard to try and merge the two without Paragon compatibility.
This project is currently being merged with theirs.
 

Neeksy

New Member
Newbie
Joined
Jul 4, 2022
Messages
1
Trophies
0
Age
20
Location
Berlin
XP
24
Country
Germany
I´m really not into the whole hacking thing tbh, I don´t even know what most of the stuff is haha. I somehow managed to get the gay marriage available but I dont really know how to get the hack where I still can get the children. I don´t have a 3ds available just the citra emulator. If there is a way I would like to get some help with that ^^´ Thx in advance!
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • K3Nv2 @ K3Nv2:
    Luckily I get to whore myself to insurance which billing departments have no idea on how to handle
  • K3Nv2 @ K3Nv2:
    What he's covered? Make his life stressful anyway
  • Sicklyboy @ Sicklyboy:
    I love how insurance companies can deny procedures because they deem it not medically necessary despite the procedure being ordered by a doctor
  • K3Nv2 @ K3Nv2:
    Going with that right now with a dental claim morons put the wrong company name and rejected claims been on hold an hour for the claims department
  • K3Nv2 @ K3Nv2:
    @Sicklyboy, BTW is it better to go usb or bt for these mini Pcs figure you may know since you play with rack systems so much
  • Sicklyboy @ Sicklyboy:
    Counting my blessings that my insurance hasn't caused me really any headache (yet, at least) despite the fact that I've been getting way more appointments and what not recently due
  • Sicklyboy @ Sicklyboy:
    @K3Nv2, what do you mean, what are you trying to do?
  • K3Nv2 @ K3Nv2:
    Just looking at a built in mouse pad keyboard combo
  • K3Nv2 @ K3Nv2:
    I loose the dongle constantly but they may have better connection with usb frequency
  • Sicklyboy @ Sicklyboy:
    Imo Bluetooth is always a option of last resort for me
  • Sicklyboy @ Sicklyboy:
    Except for phones because it tends to be pretty reliable there
  • K3Nv2 @ K3Nv2:
    I got a bad habit of taking out usb transmitter and loosing it because they can't you know print names on the damn things
  • Sicklyboy @ Sicklyboy:
    But any desktop OS, I've never had anything but frustration trying to get Bluetooth devices to work reliably and stable. It might pair and connect once, and then next time I go to use it I have to delete and re-pair it again
  • K3Nv2 @ K3Nv2:
    5.3 has been so good I think 6 is really going to make it stable
  • K3Nv2 @ K3Nv2:
    I remember how shit 3 was
  • Sicklyboy @ Sicklyboy:
    Ptouch labeler aren't terribly expensive, label shit yourself fam. This is the one I own and there are cheaper ones too https://www.amazon.com/Brother-P-Touch-PTH110BP-Portable-included/dp/B09QXYND6S
  • Sicklyboy @ Sicklyboy:
    Solves part of the problem, mixing up which dongle is which. Then you just have to not lose them lol
  • K3Nv2 @ K3Nv2:
    Double D would be proud
    +1
  • Sicklyboy @ Sicklyboy:
    Even my Xbox One controller I have it paired to my desktop over Bluetooth, it USUALLY works but sometimes it refuses to connect and I have to delete and re-pair it. Maddening
  • K3Nv2 @ K3Nv2:
    Gigabytes built in mobo bt/wifi pairs pretty decent
  • Sicklyboy @ Sicklyboy:
    That's what I'm using :(
  • K3Nv2 @ K3Nv2:
    Ran a driver update in device manager?
  • Sicklyboy @ Sicklyboy:
    Not recently but I think it's less a driver issue and more just Windows having a garbage Bluetooth stack
  • K3Nv2 @ K3Nv2:
    Could be I was having issues when I first upgraded it and didn't realiser gigabyte has specific driver revisions which is stupid
  • K3Nv2 @ K3Nv2:
    Which is married to the boards revision
    K3Nv2 @ K3Nv2: Which is married to the boards revision