Homebrew R4 Stage2 TWL Flashcart Launcher(and perhaps other cards soon™)....

Judaz

Well-Known Member
Member
Joined
Aug 30, 2015
Messages
111
Trophies
0
Age
24
XP
105
Country
Italy
Use decrypt9 or wood dumper to dump it to your SD card then run the .nds file in the NTR HB menu.
alright, I'll try thanks

--------------------- MERGED ---------------------------

Use decrypt9 or wood dumper to dump it to your SD card then run the .nds file in the NTR HB menu.
I'm sorry but could I ask you to give me a little step by step guide to do this? I've never done anything like this and it sounds quite complicated. I'd be extremely grateful
 

Scythe37

Active Member
Newcomer
Joined
Aug 8, 2016
Messages
36
Trophies
0
XP
73
Country
alright, I'll try thanks

--------------------- MERGED ---------------------------


I'm sorry but could I ask you to give me a little step by step guide to do this? I've never done anything like this and it sounds quite complicated. I'd be extremely grateful
First off, do you have A9LH?

. If not, load Decrypt9 through the HBL and go to Gamecart Dumper Options
. Then press Dump Cart (full)
. Wait for it to dump
. Install the DSi HB Menu CIA file.
. Open the DSi HB Menu
. Run the dumped ROM

You could also use WoodDumper instead of Decrypt9

Also, if you have A9LH you can just boot Decrypt9 as a payload and not have to use the HBL
 
Last edited by Scythe37,

Judaz

Well-Known Member
Member
Joined
Aug 30, 2015
Messages
111
Trophies
0
Age
24
XP
105
Country
Italy
First off, do you have A9LH?

. If not, load Decrypt9 through the HBL and go to Gamecart Dumper Options
. Then press Dump Cart (full)
. Wait for it to dump
. Install the DSi HB Menu CIA file.
. Open the DSi HB Menu
. Run the dumped ROM

You could also use WoodDumper instead of Decrypt9

Also, if you have A9LH you can just boot Decrypt9 as a payload and not have to use the HBL
Thank you very much! No, I don't have A9LH but I have Decrypt9 so I'll let you know if I solve my problem.
Thank you again
 

HighMans

Well-Known Member
Member
Joined
Aug 9, 2012
Messages
140
Trophies
0
XP
228
Country
United States
Not that I know of. I think it's only for the original R4 right now.

I have an r4 wifi
R4wifiSDHC_%E5%89%AF%E6%9C%AC.jpg

but it seems that DSTT launcher is the only one that works for me.
 

orochi115

Well-Known Member
Member
Joined
Jun 8, 2013
Messages
157
Trophies
0
Age
44
XP
222
Country
Switzerland
Summary of my posts: (sorry to repost these)

System: old 3ds 11.0.0-33J a9lh installed.
CFW: Luma 6.1.1 with experimental TwlBg patches enabled.

Slot-1: Acekard 2 (no i) with AKAIO 1.9.0.
No icon on system menu.
TWL Slot-1 Launcher v3: OK.
NTR Slot-1 Launcher 0.9b Release/Alt: Show "Loading..." on top screen but after that, both screens turn white.

Slot-1: Retail NTR Cart (oideyo doubutsu no mori).
Of cource even stock system can boot it.
TWL Slot-1 Launcher v3: OK.
NTR Slot-1 Launcher 0.9b Release/Alt: OK.

Since TWL Launcher works for me, I'm not eagerly in need of anything.
Want to know if it's my problem or the card isn't supported yet.
 
Last edited by orochi115,

Scythe37

Active Member
Newcomer
Joined
Aug 8, 2016
Messages
36
Trophies
0
XP
73
Country
I have an r4 wifi
R4wifiSDHC_%E5%89%AF%E6%9C%AC.jpg

but it seems that DSTT launcher is the only one that works for me.
Yeah, that isn't an original R4. Pretty sure it has to be one made by the original team. They're pretty hard to come across now though since they stopped making them in 2007, if I were you I'd just wait until there's DSTT support.

--------------------- MERGED ---------------------------

Summary of my posts: (sorry to repost these)

System: old 3ds 11.0.0-33J a9lh installed.
CFW: Luma 6.1.1 with experimental TwlBg patches enabled.

Slot-1: Acekard 2 (no i) with AKAIO 1.9.0.
No icon on system menu.
TWL Slot-1 Launcher v3: OK.
NTR Slot-1 Launcher 0.9b Release/Alt: Show "Loading..." on top screen but after that, both screens turn white.

Slot-1: Retail NTR Cart (oideyo doubutsu no mori).
Of cource even stock system can boot it.
TWL Slot-1 Launcher v3: OK.
NTR Slot-1 Launcher 0.9b Release/Alt: OK.

Since TWL Launcher works for me, I'm not eagerly in need of anything.
Want to know if it's my problem or the card isn't supported yet.
The same thing with NTR launcher happened when I use my weird R4 clone but it won't even work when using the TWL launcher.
r4-v2.10t-card.jpg
 

tekimotop

Well-Known Member
Newcomer
Joined
Jan 10, 2016
Messages
81
Trophies
0
Age
21
XP
55
Country
United States
You don't have to rename the existing file. Make a copy of file and name it that. You can keep both on there at the same time. ;)
It worked nicely with R4i Gold cia ,but It says wrong date or firmware expired.I dont want to change my 3ds date , is there any way to bypass this?
 

Apache Thunder

I have cameras in your head!
OP
Member
Joined
Oct 7, 2007
Messages
4,434
Trophies
3
Age
36
Location
Levelland, Texas
Website
www.mariopc.co.nr
XP
6,813
Country
United States
It worked nicely with R4i Gold cia ,but It says wrong date or firmware expired.I dont want to change my 3ds date , is there any way to bypass this?

Maybe but you'd have to patch that out of the kernel.dat you're currently using. I wouldn't know how to do that.

Don't use the original firmware. Use WoodR4 if there's a version of that compatible with your card.
 

Judaz

Well-Known Member
Member
Joined
Aug 30, 2015
Messages
111
Trophies
0
Age
24
XP
105
Country
Italy
First off, do you have A9LH?

. If not, load Decrypt9 through the HBL and go to Gamecart Dumper Options
. Then press Dump Cart (full)
. Wait for it to dump
. Install the DSi HB Menu CIA file.
. Open the DSi HB Menu
. Run the dumped ROM

You could also use WoodDumper instead of Decrypt9

Also, if you have A9LH you can just boot Decrypt9 as a payload and not have to use the HBL
By doing this I discovered that the dumped file weighs 0 mb.
So basically, my 3ds reads the r4 just fine but it doesn't read the r4's sd slot, so it's like it's dumping an empty r4.
I guess there must be some problem in my r4's sd slot, I'll try and clean it tomorrow or something like that
 

tekimotop

Well-Known Member
Newcomer
Joined
Jan 10, 2016
Messages
81
Trophies
0
Age
21
XP
55
Country
United States
Use DSTT Launcher then keep using firmware that goes to your R4i (the files that are on the SD of your R4i), but make sure it uses ttmenu.dat as the kernel file name since that launcher forces the card you boot with it to use that file name. If your cart doesn't boot using that. Then try the R4i Gold Launcher. that one uses a different kernel file patch though and I forgot what it was. What ever the R4i Gold used I guess. You'll have to look up what that card used as the file name for the kernel dat file :P
Thanks man It worked with the r4i gold.One last question.Is there anyway to load the roms from the 3d sd card and not from the r4 sd card?The r4 sd card is too small :(
 

the assaf

Well-Known Member
Member
Joined
Jun 2, 2013
Messages
489
Trophies
0
Age
29
XP
360
Country
Thanks man It worked with the r4i gold.One last question.Is there anyway to load the roms from the 3d sd card and not from the r4 sd card?The r4 sd card is too small :(
Currently the answer is no.
We need to wait for more wood3ds compatibility (planned for your cart)
Or wait for ds rom loading with no flashcart.
 

gnmmarechal

Well-Known Member
Member
GBAtemp Patron
Joined
Jul 13, 2014
Messages
6,040
Trophies
2
Age
25
Location
https://gs2012.xyz
Website
gs2012.xyz
XP
6,001
Country
Portugal
By doing this I discovered that the dumped file weighs 0 mb.
So basically, my 3ds reads the r4 just fine but it doesn't read the r4's sd slot, so it's like it's dumping an empty r4.
I guess there must be some problem in my r4's sd slot, I'll try and clean it tomorrow or something like that
Huh... You misunderstood. Dumping an empty R4 won't give you a 0MB file. What is read when dumping isn't the SD card but the cart itself afaik. The R4 isn't a micro SD adapter. The R4 has its own firmware.

Sent from my Motorola DynaTAC 8000x using Tapatalk
 

Judaz

Well-Known Member
Member
Joined
Aug 30, 2015
Messages
111
Trophies
0
Age
24
XP
105
Country
Italy
Huh... You misunderstood. Dumping an empty R4 won't give you a 0MB file. What is read when dumping isn't the SD card but the cart itself afaik. The R4 isn't a micro SD adapter. The R4 has its own firmware.

Sent from my Motorola DynaTAC 8000x using Tapatalk
oh
so how do I dump the sd card
 

gnmmarechal

Well-Known Member
Member
GBAtemp Patron
Joined
Jul 13, 2014
Messages
6,040
Trophies
2
Age
25
Location
https://gs2012.xyz
Website
gs2012.xyz
XP
6,001
Country
Portugal
what's the point of dumping the r4 then?
What you want to dump (and what is frequently requested to be dumped) is not the SD card, it's the R4 itself. Afaik, it's been requested multiple times to make launchers for carts.

Sent from my Motorola DynaTAC 8000x using Tapatalk
 

Judaz

Well-Known Member
Member
Joined
Aug 30, 2015
Messages
111
Trophies
0
Age
24
XP
105
Country
Italy
What you want to dump (and what is frequently requested to be dumped) is not the SD card, it's the R4 itself. Afaik, it's been requested multiple times to make launchers for carts.

Sent from my Motorola DynaTAC 8000x using Tapatalk
yeah but what do I do with the dumped file?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    The Real Jdbye @ The Real Jdbye: loved nes remix, but hated having to play Baseball, Tennis and Golf in order to progress