Homebrew TWL Slot-1 Launcher (First custom DSiWare app!)

TuxSH · Feb 11, 2016

0004013820000102 on N3DS, 0004013830000102 on O3DS

Februarysn0w · Feb 11, 2016

Azel said:
@TuxSH Sorry I didn't get you, on new3DS, is it 0004013830000102 or
0004013820000102 ? (I have 0004013820000102, "CTR-P-CTAP", 3DS, System, ver 0x26d0 (on my 9.0 sysnand), size : 1818624 bytes (1.73Mb)

(I have no app starting with 0x3 as unique ID btw...)

just "0004013820000102" just checked on 3dsbrew.

Azel · Feb 11, 2016

thanks a lot guys ! (might be interesting to have that info on 1st post maybe)

Lyuksus · Feb 11, 2016

is This for 3ds too?

TuxSH · Feb 11, 2016

This IS for 3DS (well, the DSi compatibilty mode)

zbw2000 · Feb 11, 2016

Owl Whiskey said:
Can someone help me? I installed the slot-1 launcher CIA to sysnand and emunand,then I installed the twlfirm_o3ds.cia to emunand. Now im trying to use my Ace3DS Plus card but I still get the error, am I doing something wrong? The card loads perfectly on my DSlite but not on my O3DS XL. (sysnand 9.2 emunand 10.5)

I think that twlfirm needs to be installed to sysnand. And the launcher only needs to be installed on emunand unless you plan on using it from sysnand

WaffleWafer · Feb 11, 2016

SkyDX said:
Yeah, it's more strictly speaking a Acekard problem and not really a TWL Launcher problem as it works flawlessly. I'm beginning to think it might be a mechanical problem. When I insert my genuine Acekard into the n3DS there is a resistance at one point, if I gently push it goes through and seats seemingly normally though. This doesn't happen with the clone.

Out of curiosity, can anyone tell me what the latest AceKard firmware is? The GBA Temp Wiki lists "Pippa Funnell" while waybacking to the old Acekard.com site lists "Fossil Fighters Champions" o.o

I think the firmware doesn't matter (don't quote me on this). Well, can't you test it out on an old DS?

SkyDX · Feb 11, 2016

Noelemahc said:
It depends on your hardware revision. My old genuine Ak2i revision topped out at Alex Rider Stormbreaker, and yes, it also has a terrible seating problem to the point where I've had to put a piece of paper into the card slot of the DSi I used it with for it to not disconnect during gameplay =(

Vampirex said:
https://gbatemp.net/threads/solving-acekard-contact-issues.231412/

Thank you both for this, it was a contact issue with my new 3DS and genuine AceKard afterall! I simply slid a tiny piece of paper between the contacts and the case of the AceKard and it started to show up no problem without freezing and works perfectly now!

Well 99% perfect, sometimes I have to slide it in and out for the n3DS to pick it up.

WaffleWafer said:
I think the firmware doesn't matter (don't quote me on this). Well, can't you test it out on an old DS?

Thanks, I got it fixed, see above!

And what's even more interesting:

My AceKard 2i works without the TWL Loader, I can simply launch it normally via the standard card-slot icon! o.o

WaffleWafer · Feb 11, 2016

SkyDX said:
Thank you both for this, it was a contact issue with my new 3DS and genuine AceKard afterall! I simply slid a tiny piece of paper between the contacts and the case of the AceKard and it started to show up no problem without freezing and works perfectly now! Well 99% perfect, sometimes I have to slide it in and out for the n3DS to pick it up.

Thanks, I got it fixed, see above!

And what's even more interesting:

My AceKard 2i works without the TWL Loader, I can simply launch it normally via the standard card-slot icon! o.o

yep! my DSTTi works without the loader too! good to hear you finally got it sorted out.

Vampirex · Feb 11, 2016

SkyDX said:
My AceKard 2i works without the TWL Loader, I can simply launch it normally via the standard card-slot icon! o.o

Means you could of gotten it to work before with the whitelistpatch and TWL_FIRM downgrade

ImCarlosGG · Feb 11, 2016

Could anyone test a R4i Max? I'm not able to do this right now.

NebulaJoker · Feb 11, 2016

Installed the CIA on both NANDs. Working like a charm, thanks OP, I love you. Confirming iTouchDS2

Bubsy Bobcat · Feb 11, 2016

Finally! I've been waiting for something like this for a while!

SkyDX · Feb 11, 2016

WaffleWafer said:
yep! my DSTTi works without the loader too! good to hear you finally got it sorted out.

Thanks, glad to hear yours works too

Vampirex said:
Means you could of gotten it to work before with the whitelistpatch and TWL_FIRM downgrade

I know but I'm on a new 3DS and I was always told TWL_FIRM downgrading only works on an old 3DS :/

EpicLPer · Feb 11, 2016

Asia81 said:
I tried the same action replay, white screen too on my n3dsxl.
It's not that hard to insert an action replay in the N3DSXL

Well, for some reason I wasn't able to insert it with a "click" as normal, so I had to do the "click-in" with another card and pull it out with force. Not sure why but yeah, it detects it but loads to a whitescreen still

--------------------- MERGED ---------------------------

I've now made a guide on how to patch TWL_FIRM!
http://gbatemp.net/threads/tutorial-patch-twl_firm-to-play-normally-blocked-ds-games.414578/

Apache Thunder · Feb 11, 2016

zbw2000 said:
I think that twlfirm needs to be installed to sysnand. And the launcher only needs to be installed on emunand unless you plan on using it from sysnand

Wrong! It's the launcher that needs to be installed to emunand AND sysnand if you want to use it from emunand. If using emunand, modified twl_firm only needs to be on emunand!

SkyDX · Feb 11, 2016

Apache Thunder said:
Wrong! It's the launcher that needs to be installed to emunand AND sysnand if you want to use it from emunand. If using emunand, modified twl_firm only needs to be on emunand!

Umm I don't want to say anything against that since you made the launcher afterall but on my new 3DS I only installed the launcher and TWL_FIRM to emuNAND and the launcher works :o My NANDs are unlinked too.

Diagamma · Feb 11, 2016

Hi, I'm trying to use a R4i-SDHC, and the first post says it works. But when I insert it in my 3DS, it doesn't shows up, and the launcher makes the "an error occured" message show up. But when I place it in a DSi, it shows up and works. Is there a chance I can use it ?...
(oh and sorry for my bad english)

Apache Thunder · Feb 11, 2016

Yes. But did you check to see if you are using latest build of rxTools or a CFW with a custom TWL_FIRM installed first? It may be failing on the modified SRL. You have to make sure TWL_FIRM has sig checks patched out before knowing if your card doesn't work on 3DS or not. I've seen other users confirm that R4i-SDHC works via this launcher, so sounds like you're not doing something right.

zbw2000 · Feb 11, 2016

Apache Thunder said:
Wrong! It's the launcher that needs to be installed to emunand AND sysnand if you want to use it from emunand. If using emunand, modified twl_firm only needs to be on emunand!

Really? I never installed it to sysnand.

Homebrew TWL Slot-1 Launcher (First custom DSiWare app!)

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

GBATemp Novice Lurker

Anime Signature Creator, PM me if you want one! :)

GBATemp Novice Lurker

Dhampir

Well-Known Member

Active Member

funny rabbit

Anime Signature Creator, PM me if you want one! :)

Your friendly Austrian IT Guy

I have cameras in your head!

Anime Signature Creator, PM me if you want one! :)

Diagamma

Guest

I have cameras in your head!

Well-Known Member

Similar threads

Popular threads in this forum