[ether2802]

Gamma and/or SoftChip users:
1. Just use HBC friendly Gamma002fix_r2 launcher provided by WiiPower using a 1:1 copy.
2. Just use the latest SoftChip rev compiled and enable the "Remove 002 error" using a 1:1 copy.
3. For DKJB force the language to Japanesse.


Modchip users:
1. Install the IOS requested by the game in your Wii with Wad Manager if you happend to have a good modchip, or...
2. Use WiiPower's modification of GeckOS (GeckOS_002fix_v3); Or QLeap's GeckOS 1.7b for cIOS wich also has the 002fix on the fly with the cIOS PatchMii Installer.
3. Modchip users can also use SoftChip and select the correct IOS, and/or enable the 002 fix.
4. After results, post your configuration HERE


You can also run the games thru the Disc Channel if prefer, but you need to....

Patch the .iso before burning:
1. Get bailli's Generic Wii Patcher 1.2 from HERE
2. Extract the main.dol from the .iso, partition 2, with your prefered aplication (WiiScruber or Trucha Signer) <--if you need visual help
3. Patch it with the Generic Wii Patcher 1.2 (search and remove 002 error, and ONLY for DKJB you also need to force to JP the language detection)
4. Put the patched main.dol into the .iso (replace)
5. Fake sign the .iso (right click over the partition 2 and trucha sign it; WiiScruber auto-sign when the file is replaced)
6. Burn the .iso


If you want to patch your .iso, I would really recomend you to use the WiiPower's toy r3 and a 1:1 copy first to patch the main.dol, after you confirm the patched main.dol works, then burn the .iso with the patched main.dol, it is better to have a 1:1 copy and a patched copy, than have 5 -6 -7 bad patched copies

WiiPower's toy usage:
1. Press A to load the game and it will ask you to press -/+ to save/load the main.dol to/from your SD or A to continue, so press - (minus)
2. Insert the SD on your PC and open bailli's GWP 1.2
3. The main.dol is found in SD:/SoftChip/RX9E/main.dol (RX9E is for NFS: U NTSC-U, each game will have is own GameID)
4. Search and Remove the 002 error from the main.dol, save it and close GWP 1.2
5. Insert again the SD on the Wii and start WiiPower's Toy r2
6. Press A to load and this time when it ask you to press -/+, we want to load the main.dol, so, press + (plus)
7. If the game starts right without the blue screen with 002 error in it, then you can use the main.dol in your SD to patch your .iso and burn it


Also check...
AutoBoot .dol's by Nicksasa
Original Gamma002fix_r2.dol and source
Channels with 002 fix

ENJOY.....!!!

I just copy/paste what WiiPower wrote on the other thread, and modify it a little

Thanks to QLeap to find this out and share it to us, and his version of GeckOS 1.7b
B@iLLi to make the GWP 1.2
Raiyu245 for the visual help
WiiPower for his GeckOS, SoftChip and Gamma loaders with the fix
mixinluv2u for comfirm the IOS55 for some ModChip users

This post has been edited by ether2802: May 26 2009, 11:54 PM

[wiigee]

Gamma(and official SoftChip) users:
1. Get bailli's Generic Wii Patcher from here:
http://www.gbatemp.net/index.php?showtopic=77938
2: Extract the main.dol from the .iso with your preffered method
3: Patch it with the Generic Wii Patcher
4: Put the patched main.dol into the .iso
5: Fake sign the .iso
6: Burn the .iso
7. Run the game with Gamma(SoftChip)

confirmed as working, cheers guys!!!

(steps 2 & 4 - used wiiscrubber) (step 5 - didnt do (unless wiiscrubber does it as default))

This post has been edited by wiigee: Dec 17 2008, 08:45 PM

[Logan]

2. Get my toy from here(you need R2):
http://gbatemp.net/index.php?showtopic=122...p;#entry1626756

Link not working mate.

[wiigee]

2. Get my toy from here(you need R2):
http://gbatemp.net/index.php?showtopic=122...p;#entry1626756

Link not working mate.

i used wiiscrubber instead

[ether2802]

2. Get my toy from here(you need R2):
http://gbatemp.net/index.php?showtopic=122...p;#entry1626756

Link not working mate.

sorry, my fault..........fixed!!!

[Distrance]

And here I thought I could finally play NFSU... I did everything what was needed to be done, but when I tried to burn it gave me stupid error on IMGBurn after a while '' W 22:24:16 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error ''

I pushed the Abort button like fucking 15 minutes ago and it's still going and won't let me abort.. I'm kinda worried here ;.;

Edit : I can't even shut down IMGBurn process, OR eject the disc tray.. .omg

This post has been edited by Distrance: Dec 17 2008, 09:37 PM

[Hkari]

And here I thought I could finally play NFSU... I did everything what was needed to be done, but when I tried to burn it gave me stupid error on IMGBurn after a while '' W 22:24:16 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error ''

I pushed the Abort button like fucking 15 minutes ago and it's still going and won't let me abort.. I'm kinda worried here ;.;

ImgBurn takes a while to shut off/abort when it is trying to burn a disk for me too. If you really want it to shut off, restart your computer.

[Distrance]

Right... My whole computer froze up thanks to IMGBurn. I couldn't kill IMGBurn process even with Killbox or cmd line... I tried to open My Computer.. it FROZE. I tried to open msn.. it FROZE. I tried to restart.. it FROZE. I had to forcefully shutdown it by holding the power button asadfsdfsdfsd...

But seriously.. did I do something wrong or is this some random error ? I don't understand why can an .iso cause the burn to fail, even if it has corrupted data in it. ( Though I did everything exactly like the Instructions said )

[WiiPower]

Right... My whole computer froze up thanks to IMGBurn. I couldn't kill IMGBurn process even with Killbox or cmd line... I tried to open My Computer.. it FROZE. I tried to open msn.. it FROZE. I tried to restart.. it FROZE. I had to forcefully shutdown it by holding the power button asadfsdfsdfsd...

But seriously.. did I do something wrong or is this some random error ? I don't understand why can an .iso cause the burn to fail, even if it has corrupted data in it. ( Though I did everything exactly like the Instructions said )

If you use my toy you can use a untouched 1:1 copy

[ether2802]

Or use Nero instead..!!

[Distrance]

What the hell is 1:1 ? I don't really understand it. It also says on your instructions that it needs R2.. What is that anyway ?

Nero does not work on my computer. I tried all existing versions of Nero, ALL crash when I try to start any of them. Get some stupid Windows Error. I also reinstalled Windows few months ago and the problem was still there. ( I didn't uninstall because of Nero )

This post has been edited by Distrance: Dec 17 2008, 10:57 PM

[Treacha]

Distrance,

Most of the times IMGBurn crashes if it can't allocate free memory space.. i got that same error 2 days ago while burning some iso's then i rebooted and voila it worked like a charm again.

Also make sure to have Media Player shut down, cause it blocks locking the device for exclusive use by IMGBurn..

Or for an alternative try burning using Droppix Recorder.. just had 1 fail there which was my own fault, while IMGBurn keeps throwing errors at me..

Good luck

Ooh btw 1:1 means it's a untouched copy (not scrubbed etc.. etc..)

[ether2802]

1:1 means the copy without decryption, and ergo, a exact copy of the original image (we use to use Backup Creator to create a 3.99 GB file), the R2 means revision 2 of the unnoficial SoftChip loader made by WiiPower, you have to do one or the other the patching and burning the .iso or using the copy without modification with softchip R2...!!!

[ether2802]

Now the WiiPower's Softchip R2 link is direct to download place so you don't need to search thru all of the 2 pages of the thread

[Distrance]

Ah... Anyway, I just noticed I made one error. I accidentally patched 1st Partition AND 2nd partition of the .iso file with Trucha Signer. Can this make it so that the game doesn't work ? Wether it's related to the burn failure last time or not is irrelevant, but I only have 4DVD's left so I don't want to waste xD.

I have the original image file still in a .rar file if this one won't do.