How to UNBRICK your N3dsXL with NO SysNAND Backup File With B9S (Sighax) and Hardmod
Hi Everyone
In this post I will try to explain you what I´ve done to unbrick my new 3ds XL without having a backup of your SysNAND... In my scenario my new3dsXL was bricked by updating the firmware from v2.1 when I was trying to install arm9lh (but i think this could unbrick any bricked console no mater how was bricked -talking about software bricks ofcourse-)
I think this could help to unbrick any bricked 3ds console using the corresponding files
I would like to share the files that I´ve used to unbrick my 3ds but I dont know if I can because Iam new on this site
Well lets get started
1- Extract your SysNAND using Win32DiskImager via hardmod and take it to a safe place in your PC (doesn´t even matter if this SysNAND is fuc..ked up it could be used as a "checkpoint" in the future)
2- Follow this guide to Install B9S (sighax) in the copy of your SysNAND via hardmod (in my case I use the 11.4 native firm as current.firm -2nd Step of the Guide- because when I updated my 3ds the v11.4 was the last firm launched by Nintendo If you dont remember which firm was the last when you updated your 3ds just try one by one)
https://3ds.guide/installing-boot9strap-(hardmod)
3-Flash back to your 3ds the copy of your SysNAND that was renamed to NAND-patched.bin as the guide says with Win32DiskImager (at this point your SysNAND already has the sighax installed and now you can launch luma chainloader)
4-Download and copy to your SDCard the latest Luma Files for Boot9Strap (sighax) and the latest Decrypt9Wip for Boot9Strap (this should be at luma/payloads and in .firm Format) and make sure the file "aeskeydb.bin" is at the "files9" folder on the root of your SDCard
5-Download the 9.2 CTRTransfer file corresponding to your console from this guide (this file has to be at the "files9" folder with his .sha file)
https://3ds.guide/9.2.0-ctrtransfer.html
6-Conect the SdCard back to your 3ds and power on the 3ds holding "start" botom to launch the luma´s chainloader and launch Decrypt9Wip and then go to "Sysnand Options>CTRNAND transfer...>Auto CTRNAND transfer" complete the combo keys and choose the CTRtransfer File and wait until finish
7-After rebooting the console it has to boot Normaly then you just have to update your firm to 11.4 and install FBI and that stuff
Iam sorry for my Bad english but i tryed to do it with out the google translate
I hope you could Unbrick your console with this info
Take care and Good luck
Pease
In this post I will try to explain you what I´ve done to unbrick my new 3ds XL without having a backup of your SysNAND... In my scenario my new3dsXL was bricked by updating the firmware from v2.1 when I was trying to install arm9lh (but i think this could unbrick any bricked console no mater how was bricked -talking about software bricks ofcourse-)
I think this could help to unbrick any bricked 3ds console using the corresponding files
I would like to share the files that I´ve used to unbrick my 3ds but I dont know if I can because Iam new on this site
Well lets get started
1- Extract your SysNAND using Win32DiskImager via hardmod and take it to a safe place in your PC (doesn´t even matter if this SysNAND is fuc..ked up it could be used as a "checkpoint" in the future)
2- Follow this guide to Install B9S (sighax) in the copy of your SysNAND via hardmod (in my case I use the 11.4 native firm as current.firm -2nd Step of the Guide- because when I updated my 3ds the v11.4 was the last firm launched by Nintendo If you dont remember which firm was the last when you updated your 3ds just try one by one)
https://3ds.guide/installing-boot9strap-(hardmod)
3-Flash back to your 3ds the copy of your SysNAND that was renamed to NAND-patched.bin as the guide says with Win32DiskImager (at this point your SysNAND already has the sighax installed and now you can launch luma chainloader)
4-Download and copy to your SDCard the latest Luma Files for Boot9Strap (sighax) and the latest Decrypt9Wip for Boot9Strap (this should be at luma/payloads and in .firm Format) and make sure the file "aeskeydb.bin" is at the "files9" folder on the root of your SDCard
5-Download the 9.2 CTRTransfer file corresponding to your console from this guide (this file has to be at the "files9" folder with his .sha file)
https://3ds.guide/9.2.0-ctrtransfer.html
6-Conect the SdCard back to your 3ds and power on the 3ds holding "start" botom to launch the luma´s chainloader and launch Decrypt9Wip and then go to "Sysnand Options>CTRNAND transfer...>Auto CTRNAND transfer" complete the combo keys and choose the CTRtransfer File and wait until finish
7-After rebooting the console it has to boot Normaly then you just have to update your firm to 11.4 and install FBI and that stuff
Iam sorry for my Bad english but i tryed to do it with out the google translate
I hope you could Unbrick your console with this info
Take care and Good luck
Pease