Hacking SNEEK+DI quick guide

[naddel81]

It's likely a partitioning issue, then, or the drive just isn't compatible.

Will clone to another card and report back. Thanks for your support.

 

[naddel81]

OK, took a new SD card and made it FAT32/primary/active. Then copied those files over:
https://www.dropbox.com/s/ybjoq3901dq5yyx/dir.html?dl=1

But when starting the neek channel I get this:



and using usb loader gx to boot the N64 games on emunand I get a constant black screen.

so, same as before.
I have done RAID configurations that were a lot easier!

 

[naddel81]

it seems as if SD card is not officially supported according to this thread:

https://gbatemp.net/threads/emunand-issues-with-usbloadergx-and-neek.409957/

 

[naddel81]

could a missing bootmii (IOS) be the problem?

 

[GreyWolf]

could a missing bootmii (IOS) be the problem?

It depends on how you're launching it. If you're using the neek2o or nSwitch channels then BootMii is not required. The ARM loader code is embedded in the binary for those.

Nintendo's official information says most SD and SDHC cards below either 64 or 32 GB should work. It doesn't mention capacities above that or SDXC.

The latest neek2o available when downloading from ModMii does work with either SD or USB but it does NOT work properly unless the NAND files are in a /nands/ folder. You will end up with a flashing blue light and the console trying to create NAND directories on the root of the drive. Unfortunately this is what happens when people don't release source for something they're working on. You either end up with something that only works in certain configurations or doesn't work at all and nobody else can fix it.

 

[naddel81]

I redid the complete modmii tutorial now and updated the wii softmod. I now want to get priiloader updated aswell, because modmii only got v 0.7 instead of the newest 0.81.
Launching 0.81 from HBC does not update it. it shows a screen "...ion" I cannot really get displayed fully, but rebooting results in still having v. 0.7.
Do you know how I can update priiloader?
maybe it has something to do with why I cannot get neek2o running. not even through nswitch channel or "bootmii".

 

[GreyWolf]

They are not related. NEEK requires what everyone is saying. First partition, MBR, primary and FAT32. You are missing one of those requirements or your drive is incompatible.

neek2o/NEEK does not depend on any IOSes or anything else other than the filesystem. It is a patched system menu that redirects all file access from the NAND to either SD or USB.

 

[josephmiitts]

link to all files says n/a your session has expired
why

 

[GreyWolf]

link to all files says n/a your session has expired
why

Because this thread is also old like the rest you are responding to. Use ModMii to build your NEEK kernel.

 

[josephmiitts]

hey i know you
i do

 

[josephmiitts]

 

[Visualwit]

Well the new hard drive works pretty well, sneek/uneek/sneek-di boot and work fine, uneek-di freezes when i try to bring up the di menu. I'm starting to suspect sneek doesn't like certain IOS's in the 50s. LEGO harry potter used IOS 56 I think and would either freeze the system menu while trying to load it, or if i start the wii with it selected, black screen with no blinks after selecting it. Dead Space Extraction I'm trying right now uses IOS 53 and is demonstrating the same behavior. That seems to be the common thread between them.

Same...