I'm not sure, should've checked better :D
I'll order M92 and some chokes and fuses, hopefully the problem will be fixed! I don't get it how it died, but whatever I guess.
Thank you all for your help, I'll update after changing the parts.
Oh okay thank you! Diode mode with red on ground + pad 2 and 3 reads 0.755V for both.
I think I've measured on the wrong points all the time until now, is the marked spot correct on the picture?
Because now I've got the right voltage I think 1.5V, 2.8V, 1.5V on pins 38-39-40. The tip with...
Ok, I've applied some flux around the ESD, and made sure everything is clean, maybe some point was connected to the shielding right next to the ESD, but now I measure the pins like on the picture.
No shorting to ground on D+ and D-.
Connecting to PC still doesn't show anything in TegraRCM...
Ok, got me a better multimeter today.
Is there a certain spot where is should be measuring for the M24 pins? I've always held one contact on the positive battery pin.
So it's weird with pin 5&6, since the voltages change wether I connect to the cathode or anode pin on the battery slot.
Result...
That's a lot of information, thank you!
The USB Port looks fine to me, couldn't see any bent pins.
On M92 I've measured ~4.5V on pins 5&9, but around 0V on pin 6. I've checked the blue marked cap (see picture: blue circle), but there is no short, seems to be okay.
-> Does this mean M92 is...
I've went ahead and did the blob solder, there is a ~5V current between the blob and the battery slot when plugging in USB.. I guess a new fuse would be needed now, do you know what the part is called?
I don't know if it should've fixed the issue, but the switch still isn't turning on. :/
I...
Hey I hope I can find some help here, I'm really frustrated and can't find any solution to my problem.
A few things to know,
The switch has AutoRCM enabled
An RCMx86 chip was soldered, but even after desoldering the switch doesn't work (Everything worked fine, before the problem happened)
The...
I've installed SX OS as "Files on SD" and got SwitchBoot_UF2 chip with multi-NAND option.
Can I somehow create a parallel EmuNAND launcher, which uses Emutendo as storage in Atmosphere?
hi guys, i installed some games using the WUP installer and in the settings the drive shows the games, but they are not visible on the Wii U menu. Can someone help? Thanks