Recent content by TheUnknownOne

  1. T

    Picofly AIO Thread

    Amtech V3 (also known as STIRRI V3)
  2. T

    PS5 UART commands

    Checked under the tape. There was some that got through but wasn't touching anything. It's all been cleaned out and the problem remains. 1705162490 Checked, there was some LM under that tape. Cleaned, still the same problem but am now getting no response from the APU instead of the RAM issue...
  3. T

    Picofly AIO Thread

    I think we found the installer that blames everything on the customer. Let's be real here, way back when all we had was the crappy single anchor corner dat0 adapter, those were in fact prone to shifting over time. The newer and far better 4 anchor ones. If those somehow lose connection and...
  4. T

    PS5 UART commands

    I have a PS5 here that was showing the following error: 80C00140 APU Freeze (No Response) - GDDR6 data line problem (replace) I've cleared the codes and re read however now I don't get any errors... it's very strange (I am new to this whole uart method of diagnostics) The console is...
  5. T

    Picofly AIO Thread

    I did both of my OLEDs using a V2 flex and haven't had a single issue... not sure what you're talking about... Many have done it succesfully.
  6. T

    Picofly AIO Thread

    Anyone know how to tell before installing if the RGB jumper will be needed based on colours the chip shows when plugging into the PC to flash it?
  7. T

    Picofly AIO Thread

    Ignore this post, had a question, figured it out.
  8. T

    Switch OLED teardown V1/V2

    Get rid of that junk wire. Undo everything and see if the problem is still there. If it is, reflow the ALJ chip to see if that fixes it.
  9. T

    Switch OLED teardown V1/V2

    Try and reflow the ALJ chip just to the left of the cpu. I've seen this exact thing among other odd issues happen to 3 people now and reflowing the ALJ chip fixed all 3 of them. Blame it on the crap manufacturing.
  10. T

    Switch OLED teardown V1/V2

    Its not the battery giving it better life, it's the screen technology. But yes it would work on a regular switch. Someone correct me if I'm wrong...
  11. T

    Switch OLED teardown V1/V2

    If it's the non flashable chip you'll need to put a flashable chip into your oled as far as I'm aware.
  12. T

    Switch OLED teardown V1/V2

    Where did you send this to (dm me if needed). Sounds more like someone may not know what they are doing.
  13. T

    I think I found the exploit to crack the Switch on the 2nd model and possibly OLED

    So basically every single game. You gave up trying to mod your switch? So get it modded with an actual chip!
  14. T

    Switch OLED teardown V1/V2

    If you disconnect the wires does the switch boot ofw? If so your fine, I would say maybe it's the CPU ribbon, what readings do you get on those caps? I re-read this, so you can boot OFW, so something is off with your install. Got pictures of how you wired it?
  15. T

    Switch OLED teardown V1/V2

    I'm not sure why the hell anyone would bother using a chip designed for the lite still with this ribbon. Specific OLED chips are out now so just use those.
See more