Recent content by Takezo-San

  1. Takezo-San

    UART Code 80060004 - 1sec BLOD - Unknown code (Solved!)

    I had this error come too. The console would work for extended period but once I would shut off and restart, it would BLOD. Wait like 10mins and then would work. So I went into fix and checked UART and it initially gave me Infeon chip check. So I had some ordered from Aliexpress and it didn't...
  2. Takezo-San

    Broken PS5 worth it for $250?

    All depends on the damage done. Motherboard photos and what not too. Gamble at the end of the day. I would recommend hold out for a similiar priced one that has an easier fix.
  3. Takezo-San

    UART Code 80060004 - 1sec BLOD - Unknown code (Solved!)

    Amazing. Well done and happy gaming! Also crazy that its the exact same MOSFET too. Weird
  4. Takezo-San

    UART Code 80060004 - 1sec BLOD - Unknown code (Solved!)

    Awesome, glad this helped you. Did you replace the MOSFET?
  5. Takezo-San

    Picofly AIO Thread

    The guide explains this. Does your chip contain the 100ohm resistors on the dat0 and cmd lines on the chip?
  6. Takezo-San

    PS5 is working normaly and then shuts down EDM-010

    Hi are these mosfets interchangeable or does a motherboard with sic655a require only that model mosfet? Thanks
  7. Takezo-San

    PS5 EDM-033 No Power – Issue After Southbridge and PMIC Replacement

    What does UART reader say?
  8. Takezo-San

    PS5 NAND SSD error 80871055

    Do the flash memory units have to be of the same brand? E.g. If I want to replace 3 Western Digital NANDS for 3 Samsung NANDS (from a donor board)?
  9. Takezo-San

    UART Code 80060004 - 1sec BLOD - Unknown code (Solved!)

    So Initially I had a bad WIFI chip and replaced that. I used the UART codes to diagnose that issue (Using PS5 wee tools software). Installed new chip and went to test but I still got the BLOD. Bench Power supply shows 12-14ma then hikes up to 310ma and then back down to 12-13ma where it hangs...
  10. Takezo-San

    PS5 WIFI Chip solder ball size

    Hey thanks for the reply. I managed to get hold of a J20h104 wifi chip and got it on the board successfully with my hot air station (took the small nozzle off and used no nozzle so there's more heat area that hits the chip, not a concentrated hit of heat. And I only heated the chip from the top...
  11. Takezo-San

    Normal behaviour near F7002?

    Hi, Do you know what the value of those caps are on IMG_20250311_190348.jpg? I knocked them off and (I know they are going to be all the same value) after taking one off I got a reading of 8.65-9uF. Can anyone confirm if this is correct. Do I need a 10uF 0402 10V (its the only Voltage for 10uf...
  12. Takezo-San

    PS5 WIFI Chip solder ball size

    Ahh thanks. I had a go with some 0.5mm*2 (reball went flawless) and the console got worse. Used to have Beep noise+ 2 BLOD and shut off but now it beeps and shuts off. I used a hot air station so I was thinking maybe its my technique and tool limitations? I've done reballs before on standard ic...
  13. Takezo-San

    PS5 WIFI Chip solder ball size

    Need help identifying the right solder ball size for the wifi chip for the PS5. I've some people say 0.5mm and others say 2*0.6mm. I'm super confused as to what is actually the correct size to use. Please help, thank you guys. (On a small chip like this I like to use solder balls rather than...
  14. Takezo-San

    Hacking Hardware Picofly - a HWFLY switch modchip

    Toshiba is the best Nand out of the all the Nands out there. I did a kamikaze on a Toshiba Nand Oled recently with rp2040 zero original board (none hwfly) and I didn't even need to replace the cmd and dat0 resistors at all.
  15. Takezo-San

    Hacking Hardware Picofly - a HWFLY switch modchip

    Nope. Took out all of those same components and put them in another V2. It worked. My mods up to this point have been done with a mosfet at the back of the board. So on the problematic board, I changed to using the Sp1 and Sp2 points. Same wires and chip and it worked. So in future, Im sticking...
See more