Recent content by studioai

  1. S

    Hardware Components used on the Switch (mostly the motherboard and main console)

    Does anyone know what this component is on HAC-CPU10 board? Thank you in advance!
  2. S

    Hardware Components used on the Switch (mostly the motherboard and main console)

    Thank you for your kindless!
  3. S

    Hardware Components used on the Switch (mostly the motherboard and main console)

    Is there any schematic or datasheet about this? Please let me know. I also plan to replace BCM IC but I want to try the resistor before I do that.
  4. S

    Hardware Components used on the Switch (mostly the motherboard and main console)

    Does anyone knows this resistor's ohm? I have a wifi broken switch board. I found out the resistor was missing due to cold joint. I have another board but the resistor was located too narrow point. So I desoldered the resistor from working board to measure its ohm. and the resistor popped away...
  5. S

    Hardware Another resistor value request

    Sorry for another request. I brown up a resistor on the backside of the PCB while I replace an IC. Please can anybody measure the resistor value for me? Refer to the picture below for the specific location of the resistor. Thank you in advance!
  6. S

    Help needed! Missing components.

    Thank you! You saved me and my Switch!
  7. S

    Help needed! Missing components.

    I tried to repair the sd connector on my Switch. After repair attempt It was turned on. I looked at pcb carefully and found out that some components are ripped off by my clumsy PCB holder clamps (noob mistake). Please help me find what those components were and the values. Thanks in advance!
  8. S

    Hardware HAC CPU 1.0 - need resistor value

    94.8 or 96k on my multitester. Mine is inaccuracy. The value is changed by probe polarities.
  9. S

    Hardware Missing resistor, and I cannot find the same in the market

    Thank you! I'll try 10K.
  10. S

    Hardware Missing resistor, and I cannot find the same in the market

    I realized that a resistor is missing while I repair my switch. My problem is the resistor cannot be found in the market (Mouser, TE, etc) The only ones I can find are 10K resistors or different-sized 9.8K resistors. Can I use a 10K resistor instead of 9.8K? or can I use the same valued resistor...
See more