sin89rus's latest activity
-
Ssin89rus replied to the thread PS5 Slim EDM-044 flashing blue light C0020303.If resistance vcpu (it need be like 6ohms, blod may be higher like 10+ ohms) /vgpu/1.8/1.35 etc are ok, apu dead. C0020303 its like 90% apu the end. --- just forgot about 10% - its South Bridge, and in your case (and case all of 44/50/51 mobos)...
-
Ssin89rus replied to the thread How to enter in IDU mode ?.Am i correct about: leaving IDU mode anyway will cause license / activation error ce-105628-2 ? Even if you did on your own dump? Any knowledge about how people enter to it, even if console non disassembled / sealed?
-
Ssin89rus replied to the thread Ps5 migrating APU from edm 030 to edm 010 board..CX90061 with original EDM-020 SPI = never pass initialisation, always stay at 320ma with no even button react (obvious). CX90061 with original EDM-031 cxd90061 dump SPI = same as cxd90069. APU dead. Endless BLOD. So, dump non crossboard 010/020/030.
-
Ssin89rus replied to the thread Ps5 migrating APU from edm 030 to edm 010 board..Yep, exactly. Maybe NOR partition need for someone who has dead NOR, but don't wanna loose data via reinstall system. Anyway, i will check 61 SB with original EDM-020 NOR on EDM-031 when get 61 SB. But think nothing change, just want to be sure...
-
Ssin89rus replied to the thread Ps5 migrating APU from edm 030 to edm 010 board..What do you mean "boot fine"? Its BLOD like original edm-020 was. Its just test for dead apu, and its dead. But i shure it will be work ok, if apu ok. Apu have like 12ohm for zen2 core (like 2cer more than working ones EDM-020). I just want to...
-
-
Ssin89rus replied to the thread Ps5 migrating APU from edm 030 to edm 010 board..I just wrote it, don't i? You can translate my messages and get image about situation in your head. https://vlab.su/viewtopic.php?f=202&t=146830
-
Ssin89rus replied to the thread Ps5 migrating APU from edm 030 to edm 010 board..The answer for my question - nand need same wifi as donor board has, cause wifi firmware inside ssd (if you, of course, can't swap it) and if its misscompatible ps5 even don't show the BLOD, just beep. After added 1.8v rail to edm-031 and j20h100...
-
Ssin89rus replied to the thread Ps5 migrating APU from edm 030 to edm 010 board..After migrate apu+nand+tmp without any nor modifications the mobo pass initialization with blod or write nand errors (cause bios and nand info misscompatible) and just beep? Did the same, but edm-020 to edm-031 to check apu for dead state, but...
