Recent content by salvatore002

  1. salvatore002

    PS5 Digital edm-030 2 sec blod (cracked GDDR6 RAM) 80800022

    OK, thanks, I'll try. As for the light, it stays a pulsating blue but never turns white. I tried with a TV, but it doesn't show anything.
  2. salvatore002

    PS5 Digital edm-030 2 sec blod (cracked GDDR6 RAM) 80800022

    where is the nor ic located?
  3. salvatore002

    PS5 Digital edm-030 2 sec blod (cracked GDDR6 RAM) 80800022

    I still have the infinite blue flashing LED without UART error, the LED never turns white
  4. salvatore002

    PS5 Digital edm-030 2 sec blod (cracked GDDR6 RAM) 80800022

    I need the exact value (µF and Voltage) of the missing capacitor circled in the picture. It is located on the top side, right next to RAM Bank 3. The motherboard is an EDM-030 with Samsung memory. Thank you.
  5. salvatore002

    PS5 Digital edm-030 2 sec blod (cracked GDDR6 RAM) 80800022

    Yes, I changed it and installed the new RAM. Now it turns on but stays stuck on the pulsing blue light forever. I think it's the RAM I installed. Has this happened to anyone?
  6. salvatore002

    PS5 Digital edm-030 2 sec blod (cracked GDDR6 RAM) 80800022

    Update: pulled the cracked RAM. The solid 80800022 is gone and I'm getting 80801F12 now. Does this definitely confirm it was pulling the bus down? Safe to order the replacement?
  7. salvatore002

    PS5 Digital edm-030 2 sec blod (cracked GDDR6 RAM) 80800022

    Hey guys,I have a broken PS5 Digital on my bench that I bought online. The previous owner had a blown power supply: he replaced it, the console worked for 2 minutes, and then went into a permanent BLOD. A repair shop looked at it but gave up. Doing my own checks: no obvious shorts, all voltages...
  8. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    Alright, thank you very much. By the way, that barrier shown in the photo isn’t present on my setup. Do you think it would be better to install it? If so, how should I do it?
  9. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    So, do you recommend replacing the 100kΩ resistor I installed with a 10kΩ one? I’m asking because I had previously measured a 100kΩ resistor—after desoldering it—on the same board and connected to the same SBV chip. Another question: where did you find this schematic? It’s really useful—can it...
  10. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    I’ve solved it! 🙌 Regarding the issue with the 5V missing at the capacitors near the SBV chip (after I accidentally caused a short with the multimeter), it turned out to be fuse F7001 that was blown. Thank you so much for pointing me in the right direction! As for the missing 2V on the...
  11. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    The fuse is not blown, it's working fine. The issue is that there's no continuity between the fuse and the capacitors that are supposed to receive 5V. Basically, the 5V is no longer reaching the capacitors in the area where I was supposed to replace the SBV chip. I've marked the current voltage...
  12. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    Hi everyone, I received the SBV chip and started testing the PS5 mainboard. I might have accidentally caused a short while measuring with the multimeter, but I’m not sure. As I mentioned earlier, I used to get 5V at the DC-DC input, but now there's no voltage there anymore. The 5V line is still...
  13. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    Thanks a lot for the detailed explanation! Unfortunately, I haven’t been able to find any PS5 donor boards available, either online or locally. If you happen to have any videos, photos, or a guide showing how you did the replacement or how you applied the conformal coating and positioned the...
  14. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    while I’m waiting for the TLV62090RGTR regulator to arrive, I’ve run into another urgent issue. During maintenance on the PS5 CPU, I lost the gasket (black foam barrier) that contains the liquid metal applied between the IHS and the heatsink. A few questions: Does anyone know if this gasket...
  15. salvatore002

    Hardware PS5 Digital – Power-on issue after 5V line repair EDM-010

    Is it compatible? Is it the right one? Is it compatible? Is it the right one?
See more