Recent content by s4n0suk3

  1. S

    No power on ps4 saab-001 after uart enable

    Hi all, need some help here, i was working on a ps4 fat triying to enable uart, first at all the console had random shutdowns, them i decided enable uart, all My 3 dumps everything ok, no mismatch. Now the console not even power on or beep, pin 7 on nor chip i had 2.6v coming from southbridge...
  2. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    check apu caps if shorted, happens to me one time and it was a slight short with tin
  3. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi check you microsd onboard conector , you need fit in right place is easy to dmg those conectors when you try to fit
  4. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi, just try to see if any short on apu capacitors (happens to me on 2 oled for working late at night) and the 2 times the blue screen was for micro shorts on those caps, if apu heat up when you turn on the console i think is still alive Edit: look continuity on that cap looks to me is shorted
  5. S

    Possible ban because of Tinfoil "Am I screwed?"

    Hi, you need update your sigpatches in order to install tinfoil
  6. S

    Hacking Hardware OLED Picofly : Suddently allways booting OFW, specific led error code

    Happens to me and is d0 cable or Flex most of times is Flex, just check with multímeter value of Dat0 point in chip
  7. S

    Oled Kamikaze dat0 error *=* no emmc block 0

    Hi can you attach a image of your fix, i have same problem, after drilling switch black screen i think i cut the line
  8. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi I will do a switch oled now, I can use a cutter for the clk point? I don't had a Dremmel right now
  9. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    here pics, 2nd pics first boton pad broken 1 leg but i supose y can touch the other flex pads (pic 3)
  10. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi how i can test voltages of my sd reader from v2, i accidentally destroyed the flex of first 1 bought 1 new and still the no sd detected msg
  11. S

    Hacking Atmosphere-NX - Custom Firmware in development by SciresM

    hi im new in this is there any way i can launch ofw trought atmosphere?
  12. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    mine is switch v2 using 47 ohms resistor ok will try again thanks for quick response
  13. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    hi everyone i still having problems with my pico install, tried with anoter rp2040 and again (first time blue, white, them cyan) and now only blue then cyan. checked like @Phantomas77 tell me and i had 15ohms between drain and source here some pics of my mosfet install if anyone see any problem
  14. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi again everyone I still having problems with my install, blue them cyan, im using 0.1mm emeled wire, I need anoter size or just with 0.1 it can work?
  15. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi, one question, in triying to mod my switch but led go cyan, checking mostfet is normal mosfet having continuity in drain and source? Sorry english not my main language
See more