Recent content by Rick00

  1. Rick00

    Switch Oled black screen Power rails issue?

    Update: I reballed and reinstalled both the adapter and the emmc, still same error, I Just give up, thanks everybody Who tried to help.
  2. Rick00

    Switch Oled black screen Power rails issue?

    I used solder balls, to reball It the First time, these one, I think It melts at 183 degree Celsius, which One you use?
  3. Rick00

    Switch Oled black screen Power rails issue?

    I'm pretty sure some solder ball cracked the First time since the emmc wasn't recognized from TegraRCM, and It was showing like It was in recovery mode (this happens on the OLED when the emmc isn't properly recognized), After the reflow the Emmc Is recognized (no more recovery mode, or shorts)...
  4. Rick00

    Switch Oled black screen Power rails issue?

    Yes, similar to this one, but the new version from abel1000x, what's weird is After reflowing the short Is gone but It still gives Power rails issue, I Guess I'll try a full reinstall 1731789264 i did use this adapter, and It worked perfectly for 2 months, I even mentioned It on my First post 😅
  5. Rick00

    Switch Oled black screen Power rails issue?

    Hello, I don't think Is the dat0, the value for It was perfect before and even After the reflow, also the console doesn't even boot on ofw
  6. Rick00

    Switch Oled black screen Power rails issue?

    Update: I managed to reflow the Emmc and now It shows a good value on 3.3v capacitors, the problem Is It still has the same error.. also I checked values with battery connected and the 3.3v capacitors has low value, but when battery Is not connected It shows a good value
  7. Rick00

    Switch Oled black screen Power rails issue?

    Hello, my modded OLED Switch it's been modded with a PCB adapter permanent fixed and everything was working fine for 2 months when It suddently stopped working with a black screen and no Power icon when charging, I did open It up and checked values, all are quite ok but the 3.3v which Is very...
  8. Rick00

    Hacking Hardware Instinct NX - V6 Black randomly start OFW, Help?

    Thanks for your reply, of course I already checked all connections before, and all have Good values, about the purple and green, are you sure those are not old Chips? Saw some videos and some had Red and green as me for a good start
  9. Rick00

    Hacking Hardware Instinct NX - V6 Black randomly start OFW, Help?

    Hello, installed a modchip instinct NX v6 black on my oled, I used the PCB permanent adapter method so the DATO Is permanent fixed, now the chip mostly works good but sometimes It starts OFW instead of Hekate, the led pattern when the problem happens Is: Red blinking light and Yellow light (not...