Recent content by NandieeHU

  1. NandieeHU

    APU ripped pad (NS Lite)

    Thats nice, then solder it back and good to go :)
  2. NandieeHU

    APU ripped pad (NS Lite)

    Hey, I sanded back a part of the APU for u. So as You can see there is a small "tab" on the picture where u can solder a wire (I recommend 0.04mm wire ) 0.04mm wire
  3. NandieeHU

    Trinket M0 or Picofly kit?

    Picofly RP2040 Core. Manytimes the trinket costs more then a core. U only had to solder the cpu flex and thats all
  4. NandieeHU

    Hardware Unpatched V1 only boots into OFW. Hekate black screen/no backlight

    Modding switches is just a part of my business. Never had any issue with his pack and I really respect Him for His work. Picofly 2040 core
  5. NandieeHU

    Hardware Unpatched V1 only boots into OFW. Hekate black screen/no backlight

    I have already reinstalled the modchip. I tried to inject the latest version of hekate. I always use Sthetix latest HATS pack which is contains the newest hekate. Its something like when no display issue but just under hekate. W
  6. NandieeHU

    Hardware Unpatched V1 only boots into OFW. Hekate black screen/no backlight

    I don't really get it. did someone before me set atmospheret to auto start? I rewrote the ini file, so the atmosphere starts now, but I still can't reach the hekate. Atmosphere only is totally fine for this console.
  7. NandieeHU

    Hardware Unpatched V1 only boots into OFW. Hekate black screen/no backlight

    Hey guys, A customer sent me this unpatched V1 for install a modchip (for easier usage). Everything went well as usually. I wanted to initialize the OFW to make a clean EMUMMC, thats the point where everything messed up. So the factory reset can not be done, because gives me network...
  8. NandieeHU

    Picofly AIO Thread

    Depends on many things. From 350 up to 450 should be fine. With my T110 nano soldering station I use 360c with knife tip. But with my weller WSP80 I used 430 because the heat transfer is totally different in this station.
  9. NandieeHU

    Hardware [Question] V1 Type-C port installed with jump wires

    Just order one of this: https://www.rippedtraces.com/
  10. NandieeHU

    Hacking Hardware Picofly - a HWFLY switch modchip

    Just come back from lunch and works perfectly fine.
  11. NandieeHU

    Hacking Hardware Picofly - a HWFLY switch modchip

    What this could be? Readings fine, RST is good.
  12. NandieeHU

    Hacking Hardware Picofly - a HWFLY switch modchip

    Guys, this new error code system is killing me. Is it two long one short? I dont get it. This code is not exist
  13. NandieeHU

    Hacking Hardware Picofly - a HWFLY switch modchip

    Its not clear for me. So You replace the CMD resistor and now its working? Anyway i'm almost sure purple screen is mostly caused by blown cmd resistor.
  14. NandieeHU

    Hacking Hardware Picofly - a HWFLY switch modchip

    As far as I know purple screen mostly bad CMD point or blown CMD resistor.
  15. NandieeHU

    Hacking Hardware Picofly - a HWFLY switch modchip

    yes, its a toshiba but toshiba is supported
See more