Recent content by loro

  1. loro

    False CLK (D) or RST (B) Error?

    Hello OP and everyone else with the same problem! I think my thread might be the solution for you! https://gbatemp.net/threads/switch-lite-booting-on-ofw-rst-problem.664584/post-10559850
  2. loro

    Getting RST not connected error on Picofly install

    Hello OP and everyone else with the same problem! I think my thread might be the solution for you! https://gbatemp.net/threads/switch-lite-booting-on-ofw-rst-problem.664584/post-10559850
  3. loro

    Hacking Switch lite booting on OFW (RST problem?)

    Hi, @taxco. Thanks for your comment! I figured out the problem and managed to make it work. I'm finishing assembling the switch and will come back with information for anyone else who has the same problem. 1734481063 I discovered the problem and I believe it is the same problem for many...
  4. loro

    Hacking Switch lite booting on OFW (RST problem?)

    I tried to unlock my Switch Lite with Picofly, but it is starting in OFW directly and pulsing the LED twice. I can't tell if it is a short or long pulse, but I left a GIF below in case I'm mistaken. It seems to be two short pulses (**), which indicates that the RST is not connected according to...
  5. loro

    Hacking Switch OLED kamikaze method gone wrong

    Hello again, everyone! I'm here to ask for your help again. I was only able to work on the Switch again today to try to fix the DAT0 connection. I removed as much UV mask as I could from the area to redo the connection, but as soon as I removed the layers I came across this little copper and...
  6. loro

    Hacking Switch OLED kamikaze method gone wrong

    Just what I needed. It's much clearer now. I feel a bit more confident that it can be fixed. Thanks again. I'll be back soon with updates! 1725312654 No, I only need layer 3 (or layer 5 haha). I appreciate you sending me these images, they gave me much more clarity on where I should go next.
  7. loro

    Hacking Switch OLED kamikaze method gone wrong

    These images are excellent, they will certainly help, but I was a little confused about dat0. In layers 3 and 4 it does not appear in these images? I still have a little doubt which way the APU track of layer 3 is to reconnect dat0
  8. loro

    Hacking Switch OLED kamikaze method gone wrong

    Great, then that's probably it. Thanks!
  9. loro

    Hacking Switch OLED kamikaze method gone wrong

    Perfect, I'll try next weekend and get back to you with updates. Thanks so far! Just one question. On layer 4 (which I believe is on) I'm getting the expected measurement of 0.550V, which leads me to believe that layer 4 is the one that connects to the eMMC and layer 3 to another place where...
  10. loro

    Hacking Switch OLED kamikaze method gone wrong

    Would it be to the right of dat0? Like in this image? From what I saw in the diagram, it seems to be coming from that direction, but I'm afraid it might end up hitting some other track. Unfortunately, I don't have access to the complete diagram, only images that were released on the internet...
  11. loro

    Hacking Switch OLED kamikaze method gone wrong

    I tried to unlock a Nintendo Switch OLED using the kamikaze method, but I was unfortunate enough to kill it. I think I went from the third to the fourth layer and now the Switch won't turn on anymore. I have the pad in the exact position of dat0 and the measurements match (around 0.550V), but I...
  12. loro

    Hacking Hardware After a failed attempt to unlock the Switch OLED, the screen appears greenish and jagged, while in the dock it works perfectly.

    I really appreciate your help, it really was a pin on the connector. Unfortunately I don't have a microscope, but I'll provide one. With the naked eye and with tweezers I managed to adjust it a little, partially solving the problem, now green bands are occasionally flashing on the screen. I...
  13. loro

    Hacking Hardware After a failed attempt to unlock the Switch OLED, the screen appears greenish and jagged, while in the dock it works perfectly.

    Unfortunately there are no bent pins :( I would like to believe so... I removed the connector and cleaned it a few times with IPA alcohol, but to no avail. I took a photo so you can see, the only anomaly I saw is on the second pin on the left, but I tested it with the multimeter and it continues
  14. loro

    Hacking Hardware After a failed attempt to unlock the Switch OLED, the screen appears greenish and jagged, while in the dock it works perfectly.

    Hello everybody! After a failed attempt to unlock my Switch OLED and try to revert, I unfortunately came across this image issue. The screen appears greenish and jagged, but on the docking station it works perfectly. Other switch functions also work without problems. I made some mistakes...
See more