Recent content by l7777

  1. L

    Homebrew Homebrew app [Release] Switch Frame Tap - stream Switch games to your PC over USB at native 1080p 60fps (no capture card)

    This is the future, the majority of code will be done by an llm. It will create a market for people to untangle dodgey llm code and a people who know how to get good code and ideas out of an llm. And yes it should be noted that an llm was used. I let Claude put in its 2 cents whenever i use...
  2. L

    Horizon OC 2.0 - Most powerful overclock tool. CPU 2397MHz, GPU 1228MHz, RAM 3200+MHz

    In general you should: Find your SOC version (Erista/Mariko) ram type and speedo rating Go to the RAM section of the Guide and use it to find your max RAM frequency. There guidelines about what is typical for your ram modules. If going for very high RAM clocks you might have to increase CPU...
  3. L

    Battery Charge Limit

    Right, but if your switch is plugged in and charging you're not trying to save battery so there is little concern about not going into deep sleep. Additionally it doesn't prevent deep sleep all together but rather wakes up periodically to see where the charge state is.
  4. L

    Battery Charge Limit

    Seems to be working as expected. Preventing deep sleep isn't really an issue if charging.
  5. L

    Horizon OC 2.0 - Most powerful overclock tool. CPU 2397MHz, GPU 1228MHz, RAM 3200+MHz

    What are your speedo ratings? Most units will do 2601 CPU with a little UV. SOC temp is more critical than the others. I try to keep it under 60. Are you following the OC Guide? If so after you've found your RAM max you can start tinkering with UV. You can't hurt anything with UV, things...
  6. L

    Horizon OC 2.0 - Most powerful overclock tool. CPU 2397MHz, GPU 1228MHz, RAM 3200+MHz

    Check your max voltage for CPU and GPU. If the calculated dynamic voltage for the higher frequency is above the limit it won't set. CPU/GPU UV can help with that as well.
  7. L

    Horizon OC 2.0 - Most powerful overclock tool. CPU 2397MHz, GPU 1228MHz, RAM 3200+MHz

    There was discussion of adding the 33MHz increments at one point but I don't remember where it landed. For your example yes temporarily setting the limit to 2333 should allow you to test what you want.
  8. L

    Horizon OC 2.0 - Most powerful overclock tool. CPU 2397MHz, GPU 1228MHz, RAM 3200+MHz

    The system can handle 33MHz increments, if I understand correctly though one of the RAM tables can only handle a number of frequencies thus 66/100/133. That said, other settings can operate on the 33MHz increments. The easiest way to see this is to set a maximum RAM frequency that doesn't...
  9. L

    Battery Charge Limit

    Yes that has to be what's happening. It's holding at 80% again now. In my troubleshooting I did have Claude add the raw battery % and cell voltage to the overlay for easy diagnosis of battery desync or other battery health issues. PR submitted, feel free to merge or not.
  10. L

    Battery Charge Limit

    Yes I was wondering if that was the case. What triggers the deep sleep state?
  11. L

    Battery Charge Limit

    I gave this a try. It seemed to work initially but then I purposely paused it for a travel trip, now it does not seem to limit charging any more.
  12. L

    What's the most up-to-date guide to jailbreak the Switch 1?

    You won't be able to just ask "Can you mod my switch." You would have to provide them with instructions and ask if they can follow them. If they can then you provide them the chip and the switch. You can of course teach yourself but you're going to be spending a minimum of a few hundred to...
  13. L

    Homebrew Upgrading to new SD card on modded switch

    do you have an emmc?
  14. L

    Homebrew RELEASE emuiibo - MitM'ing NFP services for Amiibo emulation

    Is it just a matter of rebuilding with the current libnx?
  15. L

    sysNAND brick or is there hope?

    So in my case I was toying with downgrading from 20.5 to 19 without using the maintenance mode initialization. I had a 20.5 nand backup, applied it, then used daybreak to download. It of course crashed and I started removing system save data pieces to try and fix it after consulting with...
See more