Recent content by krylic

  1. krylic

    Xbox 360 Too Many Bad Blocks - Nands Are The Same

    From any of my consoles?
  2. krylic

    Xbox 360 Too Many Bad Blocks - Nands Are The Same

    Update: I originally read the nand with a Raspberry Pi Pico and had written the original NAND dump to the NAND, the NAND wiring was fine, something was wrong with the PicoFlasher since it messed up atleast 3 of my console's nands. I recently got a xFlasher360 and it has worked on other consoles...
  3. krylic

    [JTAG] Xbox 360 Xenon JTAG wont display video.

    Sorry for a very late reply, I flashed the original NAND image to my console and it works completely fine. I still haven't managed to JTAG the console since I keep having the same issue. 1746918925 I'll try again soon and recheck everything, I'll post an update if I can figure it out
  4. krylic

    Hardware PS1/2 [Playstation 2 Slim] I ripped a pad from the G point, looking for alternative points | GH-041-14 - SCPH 75004 PAL I Modbo 5

    [SOLVED] - G point is close to the Y point, test with a multimeter to find the correct point. I'm pretty far in soldering all the Modbo 5 wires, but I accidentally pulled on the G point wire and potentially ripped the pad off, I'm not completely sure what happened, but the solder isn't sticking...
  5. krylic

    Xbox 360 Slim S-RGH Ace V3 only boots once after programming glitch chip (Images)

    What does the upflash.bin do? 1746547947 Update: I did manage to get the Ace V3 boot with S-RGH 55.2.0.3 (I tested all timings and that's the only one that works), but it usually takes 1-2 restarts for the console to succesfully boot.
  6. krylic

    Xbox 360 Slim S-RGH Ace V3 only boots once after programming glitch chip (Images)

    I don't really want to switch to rgh3, but can that help with the booting? I can boot to Xell or to the Dashboard once after programming the Ace V3, but after turning off my console and turning it on again, it wont boot to Xell or the Dashboard. 1746471961 But if I can't get this issue solved...
  7. krylic

    Xbox 360 Slim S-RGH Ace V3 only boots once after programming glitch chip (Images)

    My xbox 360 slim (corona) only boots once after I program the Ace V3 chip. Timing I use: 55.2.0.5. The console boots up just fine after programming the chip, but when i turn off my console and try booting again, the console just doens't boot anymore and has a single green dot in the middle of...
  8. krylic

    Xbox 360 xenon no power when plugged in

    I recently bought a xbox 360 with a xenon motherboard that had no power. When I opened it up and noticed it had a lot of blown capacitors, I thought that maybe it would boot if I changed the capacitors. I changed the capacitors with 6.3v, 2200uf capacitors which should be the correct capacitors...
  9. krylic

    Xbox 360 Too Many Bad Blocks - Nands Are The Same

    nand or the rgh3 soldering?
  10. krylic

    Xbox 360 Too Many Bad Blocks - Nands Are The Same

    Is it possible to save this console? I don't have a better dump, something must have happened when I first backed up the original nand. Falcon 16MB
  11. krylic

    Xbox 360 Falcon 16MB turning off after one second

    This is a Falcon 16MB console and I have read the nand and It's backed up. Nands are the same. (I use PicoFlasher) My console shuts down after a second when I turn it on without HDMI plugged in and with HDMI plugged in it keeps a green light and takes around 10-20 seconds to get RROD. If you...
  12. krylic

    PS3 Screen going black when halfway of an update.

    I'll try changing the hard drive and installing 4.55. The PS3 had no hard drive when I picked it up for free so I formatted mine to FAT32 and put it in my PS3.
  13. krylic

    PS3 Screen going black when halfway of an update.

    - 1743865619 I have a genuine PS3 controller, I have installed the latest 4.92 Official firmware with my USB Drive formatted to FAT32. For some reason my console doesn't boot to the normal recovery mode even if I hold the power button. It tells me to install a new firmware everytime I boot...
  14. krylic

    PS3 Screen going black when halfway of an update.

    I recently got a PS3 slim 20xx model, it didn't have a hard drive so I swapped it with a 500GB one. I tried booting the console on without a HDD and it gave me "Cannot start. The appropriate system storage was not found." error. I formatted the hard drive to FAT32 on my PC and put it in my PS3...
  15. krylic

    Accidentally broke a resistor near NAND wires. (XBOX 360 Jasper 16MB)

    Thank you
See more