Recent content by Interceptor777

  1. Interceptor777

    Picofly AIO Thread

    What kind of wire are you using for the mosfet?
  2. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    I would also love to know where to get dat0 cables in the US. Thank you.
  3. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    I used the same 3v3 and ground, longer wires aren't a problem for those, at least not in my case.
  4. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    JLC and Mouser order just came in, should be a fun weekend.
  5. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    pics of install?
  6. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    2nd successful attempt at two MOSFETs. Fixed my flashes green but boots OFW issue. I don't think it was the MOSFETs failing, it was the source ground connection, it didn't have a good connection with the pad on the SoC. I cannot get solder to stick to that pad so I just grounded it on the...
  7. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    So I've read through a lot of posts here and can't find any info on running atmosphere after it was found the unlock file stopped booting OFW. Is it still possible with 2.67? I know the older firmware is posed but I highly doubt downgrading is a good idea. It's a bit annoying I can't run the...
  8. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    No. I initially tried it with 28AWG and it was extremely difficult to make it work and clean, especially those tiny mosfets. It's possible to, but way way easier if you use 34AWG or something similar that's thinner.
  9. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    This looks extremely clean and nice. Once finalized will you release the design or sell it?
  10. Interceptor777

    Picofly AIO Thread

    I'm having this exact same issue. Did you reach any conclusion? I've checked over all of the wires with a multimeter and even changed my 2040 for a fresh one, no luck.
  11. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    Just changed the 2040 with a fresh one and same issue. Blue, then green flash, then boots into OFW. Did my switch suddenly become unmoddable overnight?
  12. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    They look good as well. The joints are good and I tested what I could with multimeter, some of the joints are under uv mask.
  13. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    I went back over and checked all of the connections with a multimeter and it looked good. I've attached a video of it booting. The only thing I can think of now is to replace the 2040 with another running 2.67. The one that's currently in the switch is 2.65 but can't update it now because it...
  14. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    So I left the console overnight after getting it working reliably yesterday. Today I turned it on and the 2040 still does blue, then a green flash and then off, but now the console only boots into OFW, seems like the glitch is failing and the 2040 doesn't know. Any steps before I'm forced to...
  15. Interceptor777

    Hacking Hardware Picofly - a HWFLY switch modchip

    Finally sat down and finished this :) Worked first try thanks to amazing guides created here. I'm using dual MOSFETs. Looking forward to getting my hands on an OLED and doing it on that.
See more