Recent content by hespartan61

  1. H

    Hacking OLED V6 Chip Black screen

    I suggest you make a copy of your emmc and prod.keys using hekate and lockpick in case it fails again in the future. 1701828494
  2. H

    Hacking OLED V6 Chip Black screen

    I reflowed my emmc with my heat gun raising the temperature every 1 min and used the following temperatures: >160°C 1 minute >250°C 1 minute >360°C 1 minute >400°C 1 minute When my OLED was alive again. I noticed that the space in the emmc was almost full and I don't have anything installed on...
  3. H

    Hacking OLED V6 Chip Black screen

    It worked! My OLED is alive again. I reflowed the emmc again but this time at 160-400°C while slightly moving the chip with the tweezers and putting a little pressure on it. Thank you all for taking the time to respond and help me :D.
  4. H

    Hacking OLED V6 Chip Black screen

    I didnt try to desolder the SOC flex, I just tried disconnecting them from the chip. I saw a post where they mentioned that the chip could be connected to the PC via USB serial and that through commands the chip would diagnose the connections and I tried it. The chip printed this: [2023-11-23...
  5. H

    Hacking OLED V6 Chip Black screen

    The chip only flashes red twice, then purple twice and finally white several times. I disconnected the two flex cables and rst cable from the chip to start in OFW but nothing happened, just the same black screen But if i connect my oled to PC, tegra RCM recognizes my switch as RCM mode
  6. H

    Hacking OLED V6 Chip Black screen

    Well, I desoldered, changed and cleaned the D0 and RST cables and it didn't work, the console remains the same with the black screen :( Also i reflowed the eMMC And i still have 2.059V on B point while the sthetix v6 installation video shows 2.9V on B
  7. H

    Hacking OLED V6 Chip Black screen

    Hello guys! Yesterday I was playing my NS Oled modded (1 month ago) with Instict nx v6 on Tabletop mode when my switch randomly turned off and didn't turn back on, it didn't even show any errors. Then I tried to turn it on and nothing, the chip only flashes red twice, then purple twice and...