Recent content by harpin14789

  1. harpin14789

    Hacking Hardware Picofly - a HWFLY switch modchip

    It took a couple of tries lol. I could glitch without the CPU shield but failed with shield on. That's when it hit me that mosfets were grounding. It was surprisingly not as difficult to solder and mod as others made it out to be, just had to take my time and be careful. Having a microscope...
  2. harpin14789

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'm able to boot into OFW with no issues so extra resistor was not needed :D
  3. harpin14789

    Hacking Hardware Picofly - a HWFLY switch modchip

    Ok, I've refried the CLK and Dat0 points and I detect something in all the pins. Now when I turn on switch, the modchip flashing blue, and nothing is happening, it just keeps flashes blue. What does that mean? 1707112597 I did it! The mosfet wasn't tucked under shield. Tucked under and I see...
  4. harpin14789

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks for the explanation. I'll reflow dat0 but for CLK, I had a thought, can I just run a wire from CLK to point d on modchip instead of soldering to flex cable? Just for the CLK, because I have a suspicion that the CLK links on the flex cable might be bad. What do you think?
  5. harpin14789

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thank you for your reply :). It's a messy job I know. I measured point C (Dat0) and getting 0.755 which is within range. Point 3v3 is getting 1.030 Point A is getting 0.745 Point D(CLK) is getting zero on the modchip, but on flex cable it's connecting on and off, directly at the soldering...
  6. harpin14789

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, I'm trying to mod my oled switch, I finished the mod and I'm getting this error *==, then the switch boots into OFW and everything is working fine. Where do I start on troubleshooting this?
See more