Recent content by Geration

  1. G

    ROM Hack [Tutorial] How to Decrypt, Extract & Rebuild 3DS|CIA|CXI Files

    do you know if there is a way to get the source code? or if it's possibile to get it somehow? i know some people got their hands on the source code of a game.
  2. G

    ROM Hack [Tutorial] How to Decrypt, Extract & Rebuild 3DS|CIA|CXI Files

    can i get access to games code with this? I mean once I have the rom extracted
  3. G

    ROM Hack PokeWalker Hacking

    This seems nice! Go for it!
  4. G

    Hardware 3ds popping sound??

    Fixed!
  5. G

    Hardware 3ds popping sound??

    It was that one, thank you very much! Just "fixed" it
  6. G

    Hardware 3ds popping sound??

    Which one is the bottom screen light cable?
  7. G

    Hardware 3ds popping sound??

    Hi, i just finished doing the hardmod to my 3ds and when i closed it and re-powered it it just shuts down with a popping sound. I red online that should be because of the speaker ribbon cable or something like that, so i changed all the upper screen with a replace part i had apart but it still...
  8. G

    Hardware The best place for hardmod o3ds connector

    what if clk solder point breaks while the console is running? is it going to damage the mobo for good? think i'm going to attach it to the motherboard with some insulating tape. because the thing is i really don't want to open the 3ds every time i have to dump/write the nand. once i have my...
  9. G

    Hardware The best place for hardmod o3ds connector

    What is the best place to put the hardmod o3ds connector? Because if i put it on the back plate every time i open the 3ds i risk to pull too much and damage the solder points. However on the front side, near the jack hole it just doesn't fit. I was thinking i could just take the wires off the...
  10. G

    Hardware 3ds doesn't turn on after hardmod and some repair

    The gone pad of the reader is not a problem, i found out here how to rewire that pin to a pad in the bottom part of the mother board. The main problem is that solder blob that i can't take away I really tried everything
  11. G

    Hardware 3ds doesn't turn on after hardmod and some repair

    the death of the console after few seconds could it be because of that? i tried to clean it but i just can't
  12. G

    Hardware 3ds doesn't turn on after hardmod and some repair

    Does anyone know where i can rewire these two pins?
  13. G

    Hardware 3ds doesn't turn on after hardmod and some repair

    There is a big blob of solder on ground pad of the game slot. Is there any other place where i could rewire the ground? The sd reader case is gnd?
  14. G

    Hardware 3ds doesn't turn on after hardmod and some repair

    Today i replaced the game slot and made the hardmod to my old 3ds. When i tried to switch on again the console (with the dump nand cable plugged in + the sd adapter) after the hardmod and with the new card slot it went to the classic blue screen, so i turned it off thinking everything went fine...
  15. G

    Hardware 3DS won't read SD card after cartridge slot change

    Update: i just cleaned the area near the sd card reader with some alcohol and now seems to work perfectly again! Now i just would like to know how am i supposed to rewire the new cartridge slot? Like this? those pads are in the bottom part of the motherboard?
See more
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: @SylverReZ, Indeed lol