Recent content by Consoledestroyer

  1. C

    OLED Alternate MOSFET soldering locations

    Hello Man! I am curious if you know some other tips like that when it comes to V1/V2 or Switch lite. The mosfet's possition you showed is really nice and comfortable, maybe you know some other positions like that in other switch models? :D
  2. C

    OLED Alternate MOSFET soldering locations

    Thank you for your response!
  3. C

    OLED Alternate MOSFET soldering locations

    Hello guys, I would like to ask about mosfet quantity when soldering. I saw that it depends on motherboard and sometimes the console needs 2 mosfets when soldering to the cpu capacitors. I am curious if with Deep's solution it's better to be sure and solder 2 mosfets or 1 will be always enough...
  4. C

    Hardware I'm looking for these capacitors for the Switch OLED

    Ehh... not great then. Do you have any resources or proper schemes with the right values?
  5. C

    instinct nx or hwfly picofly rp 2040

    Interesting comment, could you explain why you use 100 ohm resistors on Dat0 and CMD instead of 47 ohm like it's described in picofly guide ? I would like to know also if you use flex cpu cable or modding with Mosfet? Is the reason of using the 100 ohm resistors is preventing this situation...
  6. C

    Hardware I'm looking for these capacitors for the Switch OLED

    Thanks for response, but the info in link is a little bit too technical, i am a newbie in this kind of stuff. I just though i found the pictures with everything described about the capacitors and resistors values but now i am confused as something clearly described as 15µF turned out to be a...
  7. C

    Hardware I'm looking for these capacitors for the Switch OLED

    How do you know it is 22µF? I can see both capacitors are 15µF on the picture.
  8. C

    Switch OLED weird Horizontal green line.

    I had the problem for something like 3 weeks to month. Now it has gone. I don’t know what’s going on. I will let you know if it come back. But fingers crossed it won’t.
  9. C

    Switch OLED weird Horizontal green line.

    Unfortunately no. It steel shows itself on every screen. Does not matter if it is atmosphere or OFW or runscreen. It is everywhere. Does it look like exactly your problem?
  10. C

    Switch OLED weird Horizontal green line.

    I have not, and I don’t see it to be available. I can say that the line looks weird, like blurry. 1695148682 I have been checked it and didn’t see anything obvious. Tried disconnect and connect against and clean using isopropyl alcohol. Didn’t help. 1695148773 I am pretty sure that nothing like...
  11. C

    Switch OLED weird Horizontal green line.

    I have not. I think that would be risky, and I do not have another screen to check it.
  12. C

    Switch OLED weird Horizontal green line.

    Hello, today I noticed that something appears on my screen. There is a green horizontal line out of nowhere. I am sure there was not something like that a day before. The console did not fall, I did not break it, smash or something. I used it carefully. I saw JerryRigEverything where he pushed...
  13. C

    Switch Lite Left joystick and 2/4 arrows not working after console disassembly.

    Hello, after RP2040 installation on Switch Lite I have accidentally touched main flex tape connector and shorted it. When I set it up and turned on I realized left joystick is not working as well as left and down arrows. Everything except that works fine. Have you any advice how to check and...
  14. C

    Switch OLED B point PROBLEM RP2040

    I soldered the ground point and it helped! Everything works excellent now. Thank you for help.
  15. C

    Switch OLED B point PROBLEM RP2040

    I was albo thinking about that but in the video I provided author did not solder it too so I thought it is not a big deal. Interesting thing is why the mod chip is not blinking on any color. I read some posts on Reddit with similar problem when guy had incorrect value on b point and console as...
See more