Recent content by CarlosCruz

  1. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    OKAY. I will try. Thx
  2. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    @psycho-neon This one?
  3. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello @psycho-neon. Have chips manufactured with component assembly. I put three, all three flashed correctly. The first chip rarely does not turn on with the console, the second went well and the third directly does not turn on with the console. Have they given you any problems? I'm thinking...
  4. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thx @psycho-neon
  5. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    @bepaqui Nop. Only from the modchip, just fir try.
  6. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    @bepaqui Last try, uninstall all chip connections and turn on
  7. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    They are compatible or need nuke the rp2040? https://github.com/Ansem-SoD/Picofly/tree/main/Firmwares https://github.com/rehius/usk/releases
  8. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Lot of time but a easy work that second time done. @abal1000x
  9. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes. I prefer do that with adaptor, dat0, clk, cmd. And by the way, I specialize in reballing.
  10. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Done. Thx @abal1000x
  11. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Un Always in the same place, I go slowly completing each layer and cleaning to be able to see, a drop of liquid flux to hydrate and to be able to see through the layers. I scratch the line just enough with a pin and reveal it. Green nask around, flux, tin, I connected an enameled wire and...
  12. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    For me it is safer to drill than to lift the nand. Not everyone has a good soldering station, the nand can break due to heat, break when handling it, break a pad, a lot of dirt spread by the flux, and thermal stress in general. It is very likely that the board will end up broken due to not...
  13. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    V1 Erista unpatched. Issue solved adding one more resistor to dat0 line. Unknown Pk91 version. HOS version not supported! Trying backup bootloader... Found pkg (>. Unknown k91 version. HOS version not supported! Failed to launch HOS! Press any key...
  14. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    I made the mark by scratching slightly with a pin. These last photos that I uploaded are the final ones and I think it is enough information to be able to replicate it. I got the idea from a single image in this thread dated March if I remember correctly. I attach the original photo. It's...
  15. CarlosCruz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Better change focus. What I do is enable a test point as dat0 and I get a resistant point where to weld and it is resistant to pulling.
See more
General chit-chat
Help Users
    K3Nv2 @ K3Nv2: RG35XXSP is $65 now lol